Bently Nevada 84661-55 Standard Armored Interconnect Cable · 55 ft
Bently Nevada armored interconnect cable
Bently Nevada 55 ft cable
Bently Nevada 84661-55 cable
Brand Name:
Bently Nevada
Bently Nevada armored interconnect cable
,Bently Nevada 55 ft cable
,Bently Nevada 84661-55 cable
Bently Nevada 84661-55 Standard Armored Interconnect Cable · 55 ft
The 84661-55 is a standard armored interconnect cable configuration with a 55 ft cable length for industrial vibration monitoring connections.
Technical Specifications
| Manufacturer | Bently Nevada |
| Part Number | 84661-55 |
| Cable Series | 84661 Standard Cable, Armored |
| Cable Length | 55 ft |
| Cable Construction | 2-conductor twisted, shielded pair |
| Conductor Size | 22 AWG |
| Transducer-Side Connector | 2-socket moisture-resistant female connector |
| Instrument-Side Termination | Terminal lugs |
| Armored Configuration | Standard cable with armor |
| 84661 Length Range | 3–99 ft |
| Length Increment | 1 ft |
| Standard Lengths | 6, 8, 10, 12, 15, 17, 20, 25, 30, 33, 50 and 99 ft |
| Custom Lengths | Non-standard/custom lengths can be ordered at additional cost |
Source: Bently Nevada 200350 and 200355 Accelerometers Datasheet 164804.
Signal Path
Vibration Transducer
The vibration transducer provides the measurement signal for the monitoring chain.
Interconnect Cable
The interconnect cable carries the signal between the transducer and monitoring equipment.
Monitoring Instrument
The monitoring instrument receives the transmitted signal for vibration monitoring.
Application & Fault Search
This cable is intended for industrial vibration-monitoring signal connections where the specified armored cable configuration and length are required.
When investigating a signal problem, inspect the cable connection path, physical cable condition and termination points before replacing the cable.
Compatibility & Replacement
Original Compatibility
The cable should be matched to the required Bently Nevada cable configuration, connection arrangement and ordered length for the monitoring installation.
Historical Replacement
Replacement selection should follow the original cable configuration and connection requirements rather than relying on part-number similarity alone.
Installation & Connection
Connect the moisture-resistant female connector to the appropriate transducer connection and terminate the opposite end at the monitoring equipment using the supplied terminal arrangement.
Route the cable securely and protect the connection points from mechanical damage during installation and service.
Contact AMIKON
Delivery & Warranty
AMIKON can arrange inspection where applicable, protective export packaging and shipment support for the supplied item. Supplied items are covered by a one-year warranty under the quotation terms, with DOA cases handled through the after-sales process.
Recommended Models
View 100 Recommended Industrial Automation Models
Frequently Asked Questions
What cable construction is used?
How is the cable terminated?
How should the cable length be selected?
What information should I provide when requesting a quotation?
Can AMIKON support model matching and service inquiries?
video
Send your inquiry directly to us
