Home
>
Products
>
Allen Bradley
>
Allen-Bradley 2098-DSD-010X Ultra3000i 1 kW Indexing Digital Servo Drive
Allen-Bradley 2098-DSD-010X Ultra3000i 1 kW Indexing Digital Servo Drive
Allen-Bradley 2098-DSD-010X servo drive
Ultra3000i 1 kW indexing drive
Allen Bradley digital servo drive
Place of Origin:
USA
Brand Name:
Allenbradley
Contact Us
Request A Quote
Product Details
Highlight:
Allen-Bradley 2098-DSD-010X servo drive
,Ultra3000i 1 kW indexing drive
,Allen Bradley digital servo drive
Payment & Shipping Terms
Minimum Order Quantity
1
Packaging Details
Brand new and original
Delivery Time
2-3 work days
Payment Terms
T/T
Supply Ability
in Stock
RELATED PRODUCTS
Contact Us
Contact Now
Product Description
Allen-Bradley · Ultra3000i Series
2098-DSD-010X
Ultra3000i 1 kW Indexing Digital Servo Drive
Designed for programmed servo motion applications within the Allen-Bradley Ultra3000 family. This discontinued catalog number is an indexing drive.
Indexing Drive 100–240V AC Input Ultraware Configuration Discontinued · 2022
REQUEST A QUOTE ↗
01 Drive Overview
01
Indexing Servo Drive
A motion-control component for servo axes requiring programmed movement sequences.
The Ultra3000i range combines servo drive control with indexing functionality for applications that use programmed motion routines.
Motion Regulation Position, velocity and current control functions.
Configuration Drive setup and parameter management through Ultraware.
02 Technical Specifications
Published ratings and Ultra3000 family specifications applicable to this drive. Hardware-series-dependent values are identified below.
Technical Specifications · Expanded
Continuous Output Power1.0 kW at 230V AC input; 0.5 kW at 115V AC input
AC Input Voltage100–240V RMS, single-phase
AC Input Frequency47–63 Hz
Nominal AC Input Current9 A RMS
Maximum Inrush CurrentSeries A/B: 100 A (0-peak) at 230V AC; Series C: 20 A (0-peak)
Continuous Output Current5 A (0-peak)
Intermittent Output Current15 A (0-peak)
DC Bus Capacitance1880 µF
DC Bus Overvoltage400V DC
Maximum Power Loss48 W
WeightApprox. 2.1 kg
Operating Temperature0 to 55°C
Storage Temperature-40 to 70°C
Relative Humidity5–95%, non-condensing
Altitude1500 m; derate 3% per 300 m above 1500 m
Vibration5–2000 Hz at 2.5 g peak; 0.0006 mm maximum displacement
Shock15 g, 11 ms half-sine
Configuration SoftwareUltraware
The inrush-current value depends on the drive hardware series. Check the product label for the actual series before applying power-cycle limits. The published 1 kW rating is the 230V AC input power rating; the manual lists 0.5 kW at 115V AC input.
03 Control & Interface
Control Functions
- Three-phase sinusoidal commutation with space-vector modulation.
- Digital PI current regulator with a 125 µs update rate.
- Digital PID velocity regulator with a 250 µs update rate.
- Digital PID position regulator with feed-forward and a 1 ms update rate.
- PWM switching frequency: 4 or 8 kHz.
I/O & Connector Details
- 8 optically isolated 12–24V digital inputs, active high, current sinking.
- 4 optically isolated 12–24V digital outputs, active high, current sourcing.
- 1 normally open relay output, 30V DC maximum and 1A maximum.
- CN1: 44-pin high-density female D-sub user I/O connector.
- CN2: 15-pin high-density female D-sub motor feedback connector.
- CN3: 9-pin female D-sub serial port connector.
These I/O and control details are published Ultra3000 family specifications. Confirm the installed hardware series, motor feedback type and system wiring against the manufacturer's documentation.
04 Application & Downtime Risk
WHERE IT IS USED
Ultra3000i servo motion systems where a motor axis requires programmed indexing and drive-level position, velocity and current regulation.
Why This Model Is Searched
Customers may search for this drive when an installed axis reports a drive fault, loses motion, cannot complete a programmed movement, or requires a service replacement after drive failure.
Production Impact
One unavailable servo axis can interrupt machine sequencing.
A drive fault may stop the associated machine movement and delay production. Confirm the drive, motor feedback, wiring and stored application settings before replacement.
05 Configuration & Diagnostics
Configuration Workflow
Rockwell identifies Ultraware as the configuration software for Ultra3000 drives with indexing. The manufacturer's documentation describes offline configuration and saving drive settings to disk. Retain the existing application configuration and verify software and firmware requirements before commissioning.
Selected Fault References
- E02: Velocity exceeds half the machine-cycle position rollover per millisecond when rollover is enabled.
- E03: Absolute feedback range exceeded; check applicable feedback setup and firmware conditions.
- E44: Lost-motion fault for applications using Stegmann feedback devices; the manual describes power cycling and, in the stated condition, re-homing.
Fault codes are diagnostic references, not proof that the drive itself has failed. Review the complete fault description and the relevant firmware and feedback conditions in the manufacturer's manual.
06 Installation & Replacement Review
- Confirm the input supply is within the published single-phase voltage range and that protective earth is correctly connected.
- Verify motor power, motor feedback and control-interface connections before energizing the drive.
- Use the manufacturer's specified input protection and wire sizing; the manual recommends dual-element time-delay fuses for the input power circuit.
- Observe the published inrush-current and contactor-cycle limitations for the installed hardware series.
- Installation, wiring, commissioning and maintenance should be performed by suitably trained personnel.
FUNCTIONAL REPLACEMENT REFERENCE
2198-E1007-ERS
Rockwell Automation lists this catalog number as a functional replacement for the discontinued 2098-DSD-010X. Verify mechanical, electrical, firmware and application integration before selecting it.
07 Frequently Asked Questions
Q1What type of drive is the 2098-DSD-010X?
It is an Allen-Bradley Ultra3000i 1 kW digital servo drive with indexing capability.
Q2What input power does this servo drive require?
The published specification is 100–240V RMS single-phase AC at 47–63 Hz. Check the installation requirements and supply conditions before connection.
Q3Which software is used to configure the 2098-DSD-010X?
Rockwell's Ultra3000 installation manual identifies Ultraware as the configuration software for Ultra3000 drives with indexing.
Q4Is the 2098-DSD-010X still in production?
No. Rockwell Automation lists the model as discontinued effective December 31, 2022.
Q5What should be checked before replacing this drive?
Check the full catalog number, hardware series, motor and feedback specifications, supply voltage, wiring, application configuration and the proposed replacement's integration requirements.
08 Supply, Testing & Warranty
Identification & InspectionPart number and label verification; inspection and testing scope confirmed with the quotation.
Protective PackagingProtective packing suitable for shipment and handling.
DOA & ReturnsReport transit damage or suspected DOA promptly. Return authorization and assessment follow agreed sales terms.
Warranty12-month warranty, subject to quotation terms and the confirmed warranty scope.
RFQ Details Required: Part Number · Quantity · Destination · Required Date · Machine/System Model.
09 Related Models
Additional part numbers provided for sourcing reference. They are not presented as compatible products or functional replacements for this drive.
Show Related Models · 61 Part Numbers
| Model Reference | Model Reference | Model Reference | Model Reference |
|---|---|---|---|
| HACH DR900 | IS215TCE | 6RA7078-6DV62-0-Z | Legrand 077662L 2-USB |
| TXS1.12F10 | CP-168U | 1051.3/A004-9/1.0/4.5/8.7 | WAGO 750-842 |
| UMC100-PAN 1SAJ590000R0102 | HACH DR890 | 6SL3210-1PE34-8CL0 | SBM-3 |
| Vesda VSP-005 | 077682L | 6RA7028-6DV62-0-Z-G95+K00+K01 | 73073D3 |
| P6137 | 120B1020 | D2130 | HACH LDO10103 |
| 6GK5108-0PA00-2AA3 | 516-324-S49-C BES01AW | RE1-LA004 | ML30.241 |
| 3RP1505-1BW30 | ER40(82120AKI000) | 6SE7034-5HK84-1JC2 | E160X01 |
| TR-700 | 80-632-3n-xt | ABB 6120/12-101-500 | T8133 |
| HACH 2100Q | 6SL3100-1DE22-0AA1 | B-TL70-Q5 | 887EOL |
| S-3602U | HACH DRB200 | 6RA8031-6DV62-0AA0 | KL3454 |
| 2CSM206905R1801 E9F30PV1500 | 6101CK40000 | 67CR-206 | FD113S |
| 6RA7093-4KV62-0-Z | SPD910-500 | 3600-P10-Si | STC-MD20 |
| KFA6-STR-1.26.600 | 1051.1/A004-9/4.5/8.7 | LIP-3ECTB | V24217-B1104-V214 |
| RMN5111B | 6SL3330-7TE35-0AA3 | DDRC820FR | SMPG-UK |
| T-100 | BD-B022 | EMS58355 | 6RA7093-4KV62-0-Z |
| 6RA8031-6DV62-0AA0 | Prok Dv'S El01 | 73073D3 | HACH DR900 |
| 6SL3330-7TE35-0AA3 | 6RA7028-6DV62-0-Z-G95+K00+K01 | 6SL3100-1DE22-0AA1 |
AMIKON Industrial Supply
Industrial Automation Parts, Sourced with Precision.
AMIKON supports industrial parts sourcing with clear model identification, practical quotation coordination and responsive order communication. Share your equipment details and delivery requirements to help our team review the requested part.
Sales Contact · Miya Zheng
sales@amikon.cn
WhatsApp
+86 180 2077 6792AMIKON Industrial Supply · Industrial Automation Parts Sourcing
RELATED PRODUCTS
video
video
Send your inquiry directly to us
