GE IC676PBI016-EA VersaMax IP 16-Point PROFIBUS Input Module
GE Fanuc IC676PBI016-EA
VersaMax IP
16-Point Digital Input
Place of Origin:
USA
Brand Name:
General Electric
GE Fanuc IC676PBI016-EA
,VersaMax IP
,16-Point Digital Input
|
AMIKON INDUSTRIAL SUPPLY
|
PRODUCT INDEX / FIELD I/O
|
|
01 / PRODUCT IDENTIFICATION
GE
|
AT A GLANCE
▦ INPUT CONFIGURATION
16-point
↔ NETWORK REFERENCE
PROFIBUS-DP
▤ PRODUCT FAMILY
VersaMax IP
|
|
02 / FUNCTION
|
Digital input acquisition for distributed controlDesigned for digital input acquisition within a distributed automation installation using the VersaMax IP PROFIBUS-DP platform. |
|
03 / ENGINEERING DATA
Technical Specifications |
BASE MODEL DATA |
The values below are base-model references for IC676PBI016. Confirm applicability to the exact IC676PBI016-EA suffix and revision before ordering or installation.
03.1 Identification and electrical data
| Requested model | IC676PBI016-EA |
| Documented base model | IC676PBI016 |
| Input type | 16-point digital input |
| Nominal module supply | 24 V DC |
| Module supply range | 18–30 V DC |
03.2 Communication and field connections
| Fieldbus | PROFIBUS-DP |
| Communication rate | Up to 12 Mbaud |
| Baud-rate handling | Automatic detection |
| Field connectors | M12 connectors |
| Sensor wiring | 2-, 3- and 4-wire connections |
03.3 Mechanical and environmental data
| Dimensions (W × H × D) | 60 × 160 × 44.5 mm |
| Operating temperature | −25°C to +60°C |
| Storage temperature | −25°C to +85°C |
| Humidity reference | 95%; verify the applicable test conditions |
| Protection rating | IP67 according to IEC 60529 |
From field signal to network
|
◎ STAGE 01
Field sensors
Digital signals
|
→ |
▤ STAGE 02
Input module
Digital input handling
|
→ |
↔ STAGE 03
PROFIBUS-DP
Field network
|
|
05 / APPLICATION
Distributed input acquisitionSuitable for consideration where digital field signals must be acquired in a distributed control installation. Check the connected devices, wiring scheme and installed system configuration before selecting the module. |
⚙ FIELD DIAGNOSTICS
When input signals are missingA missing input indication does not, by itself, establish that the module has failed. Check the related field device, wiring, supply and bus status as part of the site's approved troubleshooting procedure. Follow the plant's electrical safety and isolation procedures during troubleshooting.
|
Replacement verification
| ✓ Confirm the complete nameplate code, including the -EA suffix. | ✓ Compare connector layout and power requirements. |
| ✓ Verify the existing PROFIBUS configuration and site requirements. | ✓ Follow approved isolation procedures and verify bus status after installation. |
Delivery & Warranty
|
✓ Inspection
|
Model and visible-condition checks before dispatch. Functional-test scope is confirmed in the quotation. |
|
▣ Packaging
|
Protective packaging selected for the item and shipment. |
|
◷ Warranty
|
12 months, subject to the written quotation terms and stated coverage. |
|
↩ Returns / DOA
|
Report suspected DOA, transit damage or model mismatch promptly with photos and order details. Authorization follows the agreed sales terms. |
|
08 / AMIKON INDUSTRIAL SUPPLY
Industrial Parts Sourcing,
|
⌕ MODEL VERIFICATION
↗ SOURCING COORDINATION
✉ QUOTATION SUPPORT
|
|
▣ SALES CONTACT
Miya Zheng
|
✉ EMAIL ENQUIRIES
sales@amikon.cn
☏ WHATSAPP
+86 180 2077 6792 |
|
09 / FAQ
|
Frequently Asked Questions |
▸ Question 01
What is IC676PBI016-EA used for?
▸ Question 02
Which power requirements are listed for the base model?
▸ Question 03
Which network does the base model use?
▸ Question 04
What should be checked if input signals are missing?
▸ Question 05
What information helps confirm the correct model?
For IC676PBI016-EA PDF/manual/datasheet enquiries, contact AMIKON to discuss documentation availability and exact-model verification.
10 / Related Models — sourcing references
These are additional sourcing references only. They are not presented as compatible replacements for IC676PBI016-EA.
| No. | Model Reference | Model Reference | Model Reference |
|---|---|---|---|
| 01 | X20AI2437 | M02075 O2DIRPKG/K | 6SE7033-2EG84-1JF1 |
| 02 | IC200ALG326K | DA0122 A300 | HACH DR2800 |
| 03 | 6SN1123-1AA00-0DA2 | X20BC0087 | 6ES7417-4HT14-0AB0 |
| 04 | WAGO 2001-1307 | IC200MDL640 | 6FC5203-0AF02-0AA1 |
| 05 | X20SM1446-1 | Festo VMPA-KMS-H 533198 | 6SL3225-0BE37-5AA0 |
| 06 | HACH PHC281 | ZE611 063804-102401 | IC200PWR102K |
| 07 | X20DC4395 | Bently Nevada 125840-01 | 6SE7041-2WL84-1JC1 |
| 08 | IC200ALG264L | M/20151/40 | X20HB8884 |
| 09 | 6ES5312-3AB31 | IC200CPUE05-MX | HACH LICO500 |
| 10 | 6SE7023-2EA87-2DA0 | IC200EBI001-DG | 3IF661.9 |
| 11 | IC200MDL750L | DC20-40S5-H000 | X20AI4632 |
| 12 | 6SE7034-6EE85-1AA0 | IC200SET001-HE | HACH SENSION156 |
| 13 | X20AO2622 | 6SE7021-2ES87-2DA1 | Siemens 6AF7001-0BC |
| 14 | IC200ALG320F | 6SL3100-1CE14-0AA0 | IC200PNS001-AC |
| 15 | Wieland 57.597.0155.0 WKN150/U/V0 | X20DC2395 | 7KM9300-0AE01-0AA0 |
| 16 | IC200MDD842F | 6SE7028-0ES87-2DA1 | HACH PHC805 |
| 17 | 2BH06M200 | IC200MDL650M | 6SE7032-7EB87-2DA0 |
| 18 | DGP-25-120-PPV-A-B | IC694PWR331D | X20cDC2190 |
| 19 | 6SE7018-0ES87-2DA1 | IC200MDL750 | HACH DR4900 |
| 20 | 3CP360.60-1 | Siemens 3RG9010-0AA00 | 1KF2105-6AF10-0MA0 |
| 21 | X20IF1086-2 | 5AC901.BUPS-01 | Murr Electronics 85439 |
| 22 | X20AI2632 | 6SL3210-5HB10-1UF0 | 8I66T400037.0X-000 |
| 23 | Pilz PA-1NK/S | 6SE7021-6ES87-2DA1-Z | Merlin Gerin C32H-DC 2P C16A 20546 |
| 24 | X20BB22 | 6SE7024-7ED51-Z | X20SL8010 |
| 25 | KWS200-DOS 2STE01249 | 7CX408.50-1 | 5AC901.LSD3-00 |
| 26 | Siemens 3TB5417-0A | SCR16PRT3AB | HACH LQV157 |
| 27 | 260-2-5T-HV-1024-A | Castles Eurotronik 2860 | Fanuc A20B-1007-0800/02B |
| 28 | X20AT2222 | — | — |
video
video
Send your inquiry directly to us
