logo
Home > Products > Bently Nevada >
Bently Nevada 330876-02-50-00-00 3300 XL 50 mm Proximity Probe

Bently Nevada 330876-02-50-00-00 3300 XL 50 mm Proximity Probe

Bently Nevada 330876-02-50-00-00

3300 XL 50 mm Proximity Probe

5 m Probe Cable

Brand Name:

Bently Nevada

Contact Us
Request A Quote
Product Details
Highlight:

Bently Nevada 330876-02-50-00-00

,

3300 XL 50 mm Proximity Probe

,

5 m Probe Cable

Payment & Shipping Terms
Minimum Order Quantity
1
Delivery Time
2-3 work days
Payment Terms
T/T
Product Description
AMIKON Industrial Supply

Bently Nevada 330876-02-50-00-00


Product Overview

The 330876-02-50-00-00 is a 3300 XL 50 mm proximity probe intended for use as part of a compatible proximity transducer system. It measures relative movement without contact with the monitored target.

For replacement planning, the important selection points are the probe mounting style, cable configuration, total system length and matching Proximitor Sensor.

Technical Specifications

Manufacturer Bently Nevada
Product Family 3300 XL 50 mm Proximity Probe
Probe Case Thread M14 × 1.5
Total Probe Cable Length 5.0 m (16.4 ft)
Cable Type High Temperature FluidLoc cable
Armor Option Unarmored cable configuration
Agency Approval Option No approvals
System configuration and installation considerations

Transducer system components: the 3300 XL 50 mm system consists of a separate 50 mm probe, an extension cable and a 3300 XL 50 mm Proximitor Sensor. The probe alone is not the complete measurement system.

Measurement range: the 3300 XL 50 mm system has a maximum linear range of 27.9 mm (1,100 mils). The applicable performance depends on the complete transducer arrangement.

Length matching: the 5.0 m probe option is designed for use with a 5.0 m Proximitor Sensor. When an extension cable is used, its length and the probe length must match the total length required by the Proximitor Sensor.

Replacement check: do not select a substitute solely because it belongs to the 3300 XL family. Match the probe thread, cable length, cable/armor option, approval requirement and the connected Proximitor Sensor.

Application & Failure Scenarios

Machinery displacement monitoring Used within a compatible proximity transducer arrangement to measure target movement without physical contact.
Probe or cable replacement Relevant when maintenance identifies physical damage, a loose connection or a suspected probe/cable issue. Confirm the fault using the installed system's diagnostic procedure before replacing parts.
Monitoring-channel signal problems An unavailable or unstable probe signal can affect the corresponding monitoring channel. Check the probe, extension cable, connector condition, sensor compatibility and system wiring as part of troubleshooting.

Delivery & Warranty

AMIKON can check sourcing availability and shipping options after receiving the requested quantity and destination.

Product condition, inspection or test scope, packaging, warranty coverage and return eligibility are confirmed in the quotation. For transit damage or a suspected DOA issue, provide the order details and supporting photos or test results for review.

Contact & Sourcing Support

Need to source this probe or confirm a replacement configuration? Send the full part number, required quantity and equipment details. AMIKON can help check availability and coordinate the quotation and delivery requirements.

Industrial Parts Sourcing, Kept Practical
Miya Zheng
AMIKON Industrial Supply
AMIKON industrial parts sourcing service
Industrial parts sourcing and order coordination
AMIKON industrial supply and customer support
Customer support for quotation and delivery enquiries

Request a Quotation

Include these details to help us process your request:

Part Number Quantity Destination Required Date Machine/System Model

FAQ

  • 1. Which Proximitor Sensor should be used with this 5 m probe? Use the matching 5.0 m Proximitor Sensor.
  • 2. Does this version include an armored cable? No. The “00” cable option specifies High Temperature FluidLoc cable without armor.
  • 3. What thread is required for mounting? This version uses an M14 × 1.5 probe case thread.
  • 4. Does this ordering version include agency approvals? No. The final “00” option specifies no approvals.
  • 5. What should be checked before ordering a replacement? Match the probe thread, 5.0 m cable length, cable/armor option, approval requirements and connected Proximitor Sensor.

Related Models

View related models
AMIKON Industrial Supply · Industrial automation and instrumentation parts sourcing.

Send your inquiry directly to us