Bently Nevada 170180-02-00 External Transducer I/O Module
External Transducer I/O Module
FieldMonitor System Module
Vibration Monitoring Module Industrial Condition Monitoring
Nguồn gốc:
Hoa Kỳ
Hàng hiệu:
Bently Nevada
Số mô hình:
170180-02-00
External Transducer I/O Module
,FieldMonitor System Module
,Vibration Monitoring Module Industrial Condition Monitoring
Băng hình
Cảm biến tiệm cận Bently Nevada 170180-01-00 dòng 3300 XL với đường kính đầu đo 8 mm
| Parameter | Specification |
|---|---|
| System Compatibility | Bently Nevada 1701 FieldMonitor |
| Number of Channels | 2 (Independent) |
| Supported Transducers | 2-wire Velocity Transducers (e.g., Velomitor) |
| Input Signal Range | 0 to -Vt (Negative voltage) |
| Sampling Rate | 10 kHz per channel |
| Frequency Response | -5% at > 25 kHz |
| Input Impedance | 9.98 ± 0.02 KΩ |
| Current Draw | 2.0 mA max (without transducer) |
| Power Requirement | 24V DC (sourced via Terminal Base) |
- Supports two transducer channels, enabling connection of up to two vibration sensors
- Fully compatible with FieldMonitor terminal bases for seamless system integration
- Designed with a single-slot structure, allowing space-efficient installation within the FieldMonitor system
- Provides enhanced vibration monitoring capabilities to improve machine condition analysis and diagnostics
What is the main function of this module?
It serves as a simple interface between the sensor and the field monitoring system. It receives signals from the dual linear velocity sensor and converts them into data for vibration monitoring of rotating equipment.
Can I use -01-00 instead of -02-00?
No, they are not interchangeable. -02-00 is for two-wire sensors, while -01-00 is for other types of sensors. Using the wrong model number will usually result in no signal received or incorrect readings.
Do I need to turn off the power to replace it?
Not usually. These modules support hot-swap in most setups. Even so, it’s better to pause any shutdown or alarm functions on that channel just to avoid unwanted trips during replacement.
What if the “OK” light stays off after installation?
Check the wiring first. With 2-wire systems, it’s often caused by reversed polarity or a loose connection. If the wiring looks fine, try placing the module in a different slot to see whether the problem is with the module itself or the base.
Amikon Limited provides industrial spare parts to customers worldwide. We offer reliable products and services at highly competitive prices, all with a 24-month warranty. We focus on mature, traditional, and discontinued parts, and our experienced team ensures consistent product quality and on-time delivery.
| 330103-00-04-10-02-05 | 330910-05-10-02-00 | 3500/42M 140734-02 |
| 330730-040-03-00 | 330101-00-16-10-02-00 | 3500/92 |
| 330104-00-25-10-02-05 | 3300/12 | 330103-00-05-10-02-00 |
| 330103-00-07-20-02-00 | 330850-50-05 | 330703-000-060-10-02-00 |
| 126599-01 | 330730-080-00-00 | 330103-00-09-10-02-00 |
| 990-04-70-01-00 | 330930-040-01-00 | 135813-01 |
| 330103-00-15-05-01-00 | 990-08-XX-01-00 | 990-05-XX-01-00 |
| 330905-00-10-10-02-00 | 330130-040-03-00 | 330180-X1-05 MOD:145004-02 |
| 991-06-50-01-00 | 3300/16-02-01-00-00-00-01 | 133323-01 |
| 330103-00-15-10-02-00 | 330851-06-000-070-50-00-05 | 330905-00-08-10-02-00 |
Băng hình
Băng hình
Băng hình
Băng hình
Băng hình
Gửi yêu cầu của bạn trực tiếp đến chúng tôi
