AMIKON LIMITED
We'll get back to you as soon as possible.
Place of Origin:
Germany
Brand Name:
Siemens
SM 321 digital input module for SIMATIC S7-300 automation systems, with 16 electrically isolated 24 V DC input channels.
The 6ES7321-1BH02-0AA0 receives 24 V DC signals from field devices and transfers their input states to the S7-300 controller through the backplane bus.
Its 16 input channels form one isolation group. The module supports switches and 2-, 3- or 4-wire proximity sensors.
| Product family | SIMATIC S7-300 |
| Module type | SM 321 digital input |
| Order number | 6ES7321-1BH02-0AA0 |
| Number of digital inputs | 16 |
| Rated input voltage | 24 V DC |
| Permissible load voltage L+ range | 20.4–28.8 V DC |
| Input signal "0" | -30 to +5 V |
| Input signal "1" | 13 to 30 V |
| Typical input current at signal "1" | 7 mA |
| Input characteristic | IEC 61131, Type 1 |
| Input delay, 0 to 1 transition | 1.2–4.8 ms |
| Input delay, 1 to 0 transition | 1.2–4.8 ms |
| Input delay parameterization | No |
| Simultaneously controllable inputs, horizontal mounting | 16 up to 40 °C / 16 up to 60 °C |
| Simultaneously controllable inputs, vertical mounting | 16 up to 40 °C |
| 2-wire sensor connection | Supported |
| Maximum permissible quiescent current, 2-wire sensor | 1.5 mA |
| Backplane bus current consumption, 5 V DC | 10 mA max. |
| Typical power loss | 3.5 W |
| Electrical isolation between input channels | No |
| Input isolation grouping | 16 channels per group |
| Isolation from backplane bus | Yes, optocoupler |
| Isolation test voltage | 500 V DC |
| Diagnostic function | No |
| Diagnostic alarm | No |
| Hardware interrupt | No |
| Green digital input status indicator | Yes |
| Required front connector | 20-pin |
| Maximum shielded cable length | 1,000 m |
| Maximum unshielded cable length | 600 m |
| Width | 40 mm |
| Height | 125 mm |
| Depth | 120 mm |
| Approximate weight | 200 g |
Used in SIMATIC S7-300 control systems to collect discrete field signals from switches and compatible proximity sensors. Typical signals include equipment states, limit positions, interlocks and other on/off conditions in automated processes.
Maintenance teams may search for this module when input states are missing or unstable, input channels are damaged, or a module requires replacement. Unavailable field signals can prevent the controller from confirming machine conditions and interrupt equipment sequences or production.
Verify the complete order number, input voltage requirements, channel arrangement, front connector, field wiring and the existing S7-300 hardware configuration before ordering.
Do not assume another SM 321 variant is interchangeable solely because it has the same channel count or nominal voltage.
It supports switches and 2-, 3- or 4-wire proximity sensors. The specified input voltage is 24 V DC.
No. The 16 channels belong to one isolation group. The input group is electrically isolated from the backplane bus through an optocoupler.
No. This module does not provide diagnostic alarms or hardware interrupts. Green input status indicators are provided.
A 20-pin front connector is specified. Check the existing connector and field wiring arrangement before installation.
Check the complete order number, 24 V DC input requirements, channel arrangement, front connector and installed S7-300 hardware configuration.
Industrial automation spare-part sourcing, model verification and quotation coordination for maintenance and procurement teams.
Siemens 6ES7321-1BH02-0AA0 datasheet and manual are the relevant product documentation references for checking technical data and installation requirements.
Product lifecycle: Siemens catalog identifies this article as being in the product phase-out stage since 01 October 2023.
Send your inquiry directly to us