AMIKON LIMITED
We'll get back to you as soon as possible.
Place of Origin:
Germany
Brand Name:
Siemens
A compact SIMATIC S7-1200 controller designed to coordinate machine logic, integrated field signals and industrial communication. AMIKON helps maintenance and purchasing teams source automation parts with clear model identification and practical order coordination.
The CPU 1214C is a programmable controller in the SIMATIC S7-1200 family. It combines control processing, onboard signal handling and industrial communication in a compact controller platform for machine-level automation.
| Manufacturer | Siemens |
| Product Family | SIMATIC S7-1200 |
| CPU Type | CPU 1214C DC/DC/DC |
| Firmware Version | V4.7 |
| Engineering Software | STEP 7 V20 or higher, as listed in the supplied data |
| Power Supply | 24 V DC nominal |
| Permissible Supply Voltage | 20.4–28.8 V DC |
| Reverse Polarity Protection | Yes |
| Rated Current Consumption | 500 mA, CPU only |
| Maximum Current Consumption | 1,500 mA, CPU with all expansion modules |
| Maximum Inrush Current | 12 A at 28.8 V |
| Typical Power Loss | 12 W |
| Work Memory | 150 KB, integrated |
| Load Memory | 4 MB, integrated |
| Memory Card | SIMATIC Memory Card supported |
| Retentive Data Area | Maximum 14 KB |
| Real-Time Clock Backup | Typical 480 hours |
| Maintenance-Free Operation | Yes; without battery |
| Digital Inputs | 14 integrated, 24 V DC |
| High-Speed Counter Inputs | 6 inputs usable for technological functions |
| Digital Input Signal 0 | 5 V DC at 1 mA |
| Digital Input Signal 1 | 15 V DC at 2.5 mA |
| Digital Input Delay | Parameterizable; standard input range includes 0.1 ms to 20.0 ms settings |
| Digital Outputs | 10 integrated, 24 V DC transistor outputs |
| High-Speed Outputs | 4 pulse outputs, up to 100 kHz |
| Rated Output Current | 0.5 A per output |
| Maximum Lamp Load | 5 W |
| Analog Inputs | 2 integrated |
| Analog Input Range | 0–10 V DC |
| Analog Input Resolution | 10 bit, including sign |
| Analog Conversion Time | 625 μs per channel |
| Analog Input Cable | Maximum 100 m, twisted and shielded |
| PROFINET Interface | 1 × PROFINET interface, RJ45 Ethernet |
| Transmission Rate | Up to 100 Mbit/s |
| Integrated Switch | No |
| PROFINET IO Controller | Supported |
| PROFINET IO Device | Supported |
| Maximum Connectable PROFINET IO Devices | 16 |
| Communication Protocols | PROFINET IO, TCP/IP, ISO-on-TCP, UDP, S7 communication, OPC UA Server and Modbus |
| Expansion Capacity | Up to 3 communication modules, 1 signal board and 8 signal modules |
| 5 V DC Backplane Bus Current | Maximum 1,600 mA for SM and CM |
The technical values above reflect the product information supplied for this page. Communication functions, expansion limits and I/O operating conditions should be checked against the installed hardware configuration before engineering or replacement.
This controller serves as the central processing unit in SIMATIC S7-1200-based machine and equipment automation. It executes the control program and coordinates field signals and network communication.
A controller failure can stop the machine sequence it manages, interrupt field signal processing and delay production recovery until the control program and hardware configuration are restored.
Before replacing a CPU, verify the complete article number and installed system configuration. Check the firmware and engineering software version, SIMATIC Memory Card, I/O assignment, communication settings and connected expansion modules.
Where the original controller is unavailable or damaged, confirm that the existing project can be restored and that the replacement hardware configuration matches the machine requirements before commissioning.
Keep your maintenance and purchasing process moving with a sourcing partner focused on accurate part identification, responsive communication and clear order coordination. AMIKON supports industrial automation requirements from initial inquiry through shipment arrangements.
The CPU uses a 24 V DC nominal supply, with a permissible input range of 20.4–28.8 V DC.
The onboard configuration includes 14 digital inputs, 10 digital outputs and 2 analog inputs.
The supplied product information lists STEP 7 V20 or higher for engineering with the specified firmware version.
Confirm the complete article number, firmware, project backup, memory card, I/O configuration, communication settings and expansion hardware before commissioning a replacement.
Send your inquiry directly to us