AMIKON LIMITED
We'll get back to you as soon as possible.
Place of Origin:
Germany
Brand Name:
Siemens
CP 342-5 provides the communication interface between an S7-300 / C7-300 station and PROFIBUS. The module uses an electrical RS485 PROFIBUS connection and provides a separate 24 V DC power connection.
For installations using this exact order number, the communication processor can be assessed as part of the existing S7-300 network architecture, including its configured PROFIBUS role and communication services.
| Manufacturer | Siemens |
|---|---|
| Order Number | 6GK7342-5DA02-0XE0 |
| Product Type | CP 342-5 Communications Processor |
| Automation System | SIMATIC S7-300 / C7-300 |
| Fieldbus Connection | PROFIBUS |
| PROFIBUS Transfer Rate | 9.6 kbit/s to 12 Mbit/s |
| PROFIBUS Connector | 9-pin D-sub female connector, RS485 |
| Power Connection | 4-pin terminal |
| External Supply | 24 V DC |
| Backplane Supply | 5 V DC from the S7-300 backplane bus |
| Communication Services | PROFIBUS DP, PG/OP communication, S7 communication and open communication |
| PROFIBUS DP Mode | DP master / DP slave functions are documented for the CP 342-5 family; confirm the intended role and configuration for the installed DA02 version. |
| DP Protocol Version | DPV0 |
| Installation Platform | SIMATIC S7-300 rack system |
The listed interface and system information is based on Siemens CP 342-5 equipment documentation. Application-specific configuration limits and firmware requirements should be checked against the installed hardware state and STEP 7 project.
In an S7-300 control system, the CP 342-5 provides the PROFIBUS communication path between the controller and connected field devices or other network participants.
When the controller can no longer exchange data with PROFIBUS devices, maintenance teams may inspect the CP, bus connection, network configuration and connected equipment.
A suspected communication processor fault may lead to a search for the exact 6GK7342-5DA02-0XE0 replacement to restore the established S7-300 communication arrangement.
Loss of fieldbus data exchange can affect remote I/O visibility, device coordination or process supervision, potentially extending troubleshooting and production downtime.
Before replacing or commissioning the module, verify the complete order number, the configured CP type, PROFIBUS network parameters and the project data used by the S7-300 station.
The module's physical installation and configuration must follow the Siemens equipment manual and the requirements of the actual rack and network design.
For 6GK7342-5DA02-0XE0 pdf/manual/datasheet searches, use the Siemens CP 342-5 equipment documentation and the product-specific technical data as the reference for installation, connection, communication functions and compatibility checks.
Document reference: Siemens CP 342-5 / CP 342-5 FO Equipment Manual, document number C79000-G8976-C146. Confirm the applicable edition and hardware state before carrying out replacement or configuration work.
AMIKON helps industrial customers source automation components with responsive quotation support, order coordination and shipment arrangements.
International delivery can be arranged by air, sea or land according to destination and order requirements.
It is a CP 342-5 communications processor used to connect a SIMATIC S7-300 / C7-300 automation system to a PROFIBUS fieldbus network.
The CP 342-5 uses a 9-pin D-sub female connector with an RS485 electrical interface for PROFIBUS.
The module has a 4-pin terminal connection for a 24 V DC external power supply. It also receives 5 V DC from the S7-300 backplane bus.
Check the exact order number, rack installation, PROFIBUS wiring, network settings and the engineering project configuration before commissioning the replacement.
Rack and slot suitability must be checked against the Siemens CP 342-5 equipment manual and the actual S7-300 rack arrangement. Do not assume that every expansion-rack configuration is supported.
| Siemens 6QG3214-2EA00 | AF101 | MAC090C-0-GD-4-C/110-A-2/WI521LV/S013 | HACH HQ11D |
| Rittal SK 3209910 | DI439 | KA37 DRE80M4BE1/TF/ES7S | Siemens 6SN1111-0AA00-0DA1 |
| GSS06-2F 1F800C | Siemens 1FT6062-6AC71-3AH0 | ST-T9 Version. 2.1 | R47 DRN90S4/TH |
| 3XP152.60-1 | Vogel H 30 265035 | Siemens 6SE1216-2AD02 | 7EX270.50-1 |
| DDC01.1-K100A-DA01-00 | SPK8-15 A-W-A-CVBV | Siemens 6QG3215-2EA00 | R67 DRN80M4/BE1HR/MM07/AMA6 |
| Siemens 2KJ1104-1EM13-6FW1-Z | MM432 | DSBC-80-450-CD3-PPSA | ME-31 |
| Siemens 6AV7891-0BB00-0AB0 | FHZ67 LQ100/4 | 4E0021.01-590 | HACH G49 |
| MAC090C-0-GD-3-C/110-A-2/S023 A201312 | Nord SK 100SH/4 | DI435 | Siemens 6SC6101-3B-Z |
| 0-028-403-43-002-000 | Siemens 1LA5070-1AB21-Z | ZX-TDS04T | Rittal SK 3375549 |
| KA47 DRN100LS4/BE2/MI/TH/LN | DO720 | Siemens 2KJ1503-6EM13-6HJ1-Z | 7D1435.7 |
| Lenze 9220 9226_E.1A.12 | Siemens 6ES7033-2ES87-0FA1 | SSP802-4 | HACH 24347 |
| 1.3-100-220/30-0-U1 | MAC090C-0-GD-4-C/110-A-2/WA610XX/S013 | EX270 | EGC-HD-125-800-TB-0H-GK |
| FC071-6EQ.6K.A7 | HACH LICO620 | Siemens 6SN1111-0AA00-0DA1 | Siemens 6QG3215-2EA00 |
| 7DI435.7 | Siemens 6SE1216-2AD02 | ZX-TDS10T | Siemens 1FT6062-6AC71-3AH0 |
| KDS 1.1-050-300-W0-220 | Siemens 6AV7891-0BB00-0AB0 | SF47 DRN90S4 | 7DI439.7 |
| MAC090C-0-GD-4-C/110-A-2/WI521LV/S013 | Siemens 2KJ1104-1EM13-6FW1-Z | Siemens 6ES7033-2ES87-0FA1 | OGDSK214K131302L06RXTB1P2S9010H1BXXX1XXX |
| Siemens 6QG3214-2EA00 | HACH HQ11D | Siemens 6SE1216-2AD02 | Siemens 2KJ1503-6EM13-6HJ1-Z |
| Siemens 1FT6062-6AC71-3AH0 | 7EX270.50-1 | HACH 24347 | Siemens 1LA5070-1AB21-Z |
Send your inquiry directly to us