Place of Origin:
Germany
Brand Name:
Siemens
Model Number:
6EP1336-2BA10
Industrial power supply sourcing for automation and control cabinet requirements.
SITOP PSU100S / 24 V DC / 20 AThe 6EP1336-2BA10 is a Siemens SITOP PSU100S regulated power supply. It converts single-phase AC input into an isolated DC output for industrial control equipment.
The unit features an adjustable DC output, a 24 V OK status indicator and a relay signaling contact. Its output is specified as protected against no-load, overload and short-circuit conditions.
This power supply is intended for automated machines and industrial systems requiring a regulated 24 V DC control supply. Within a control cabinet, it can supply connected control and field circuits within the system's designed load capacity.
| Product family | SITOP PSU100S |
| Order number | 6EP1336-2BA10 |
| Power supply type | Regulated power supply |
| Input network | Single-phase AC |
| Rated input voltage | 120 / 230 V AC, automatic range selection |
| Input voltage range | 85–132 V AC / 176–264 V AC |
| Rated input frequency | 50 / 60 Hz |
| Frequency range | 47–63 Hz |
| Rated output voltage | 24 V DC |
| Rated output current | 20 A |
| Rated output power | 480 W |
| Output voltage adjustment | 24–28 V via potentiometer |
| Output voltage tolerance | 3% relative overall tolerance |
| Efficiency | 90% |
| Protection degree | IP20 |
| Mounting | 35 mm DIN rail, EN 60715 |
| Input current at 120 V AC | 7.5 A |
| Input current at 230 V AC | 3.5 A |
| Power-failure buffering | Minimum 20 ms at rated output current |
| Inrush current limitation | Maximum 11 A at 25 °C |
| Integrated input fuse | T 10 A |
| Recommended feeder protection | 10 A miniature circuit breaker, characteristic C; or Siemens 3RV2411-1JA10 at 120 V / 3RV2411-1FA10 at 230 V |
| Maximum residual ripple | 150 mV |
| Maximum voltage peak | 240 mV |
| Overload capability | 150% of rated output current for up to 5 s/min |
| Short-circuit protection | Electronic shutdown with automatic restart |
| Output isolation | Galvanic isolation between input and output; SELV output |
| Power OK indicator | Green LED for 24 V OK |
| Signaling contact | Relay, normally open contact 13–14 |
| Signaling contact rating | 30 V AC / 0.5 A; 60 V DC / 0.3 A; 30 V DC / 1 A |
| Operating temperature | 0 to 70 °C, natural convection |
| Transport temperature | −40 to +85 °C |
| Storage temperature | −40 to +85 °C |
| Relative humidity | 5–95%, non-condensing |
| Enclosure dimensions (W × H × D) | 115 × 145 × 150 mm |
| Installation width × mounting height | 120 × 245 mm |
| Net weight | 2.4 kg |
| Required clearance above | 50 mm |
| Required clearance below | 50 mm |
| Input terminals | L1, N, PE; one screw terminal each |
| Output terminals | Two screw terminals each for + and − |
| Auxiliary signal terminals | 13 and 14, one screw terminal each |
| Input conductor cross-section | 0.2–4 mm² |
| Output conductor cross-section | 0.2–4 mm² |
| Auxiliary contact conductor cross-section | 0.14–1.5 mm² |
| EMC emission | EN 55022 Class B |
| Harmonic current emissions | EN 61000-3-2 |
| EMC immunity | EN 61000-6-2 |
| Approvals listed in current data sheet | CE, UL, UKCA, EAC, BIS, CB; DNV shipbuilding approval |
The green 24 V OK LED and relay signaling contact provide operating-state indication. During normal operation, the LED is illuminated and contacts 13–14 are closed. During overload operation or loss of the supply voltage, the normal indication changes.
The output is designed to withstand no-load, overload and short-circuit conditions. Electronic current limitation and automatic restart are specified for short-circuit protection.
Contact Miya Zheng for sourcing enquiries, product details and quotation coordination.
Click the image to start an email enquiry. For faster review, include the exact part number and required quantity.
Additional industrial automation and electrical component references supplied for sourcing enquiries. These models are not presented as direct replacements or confirmed compatible products.
video
video
video
Send your inquiry directly to us
