AMIKON LIMITED
We'll get back to you as soon as possible.
Place of Origin:
Germany
Brand Name:
Siemens
A four-channel digital output module for SIMATIC ET 200S distributed I/O systems, designed for switching 24 V DC loads.
The module belongs to the SIMATIC ET 200S distributed I/O system. Its documented load applications include solenoid valves, DC contactors and indicator lights.
The Siemens module manual identifies the following general terminal assignments.
Siemens lists compatible TM-E15 terminal modules in its manual, including screw-type, spring-terminal and Fast Connect variants.
Terminals 4, 8, A4, A8, A3 and A7 are available only on specified terminal modules. Check the exact terminal-module type and its wiring diagram before installation.
Installation and commissioning should follow the applicable ET 200S operating instructions and site electrical safety procedures.
A channel LED provides status indication; it should not be interpreted as a dedicated fault-diagnostic function. When troubleshooting, check the output command, 24 V DC load supply, terminal wiring, connected load and system-side conditions.
AMIKON supports industrial automation maintenance and spare-parts sourcing with a practical focus on part-number verification, supply coordination and responsive quotation support.
It provides four digital outputs. Each output has a rated current of 2 A, with a maximum total output current of 4 A per module.
The Siemens manual identifies solenoid valves, DC contactors and indicator lights as suitable load applications. Actual loads must remain within the specified electrical limits.
No. The technical documentation specifies no diagnostic function. It does provide a green status LED for each digital output channel.
No. The outputs are not electrically isolated from one another. The outputs are isolated from the backplane bus, with an isolation test voltage of 500 V DC.
Verify the exact order number, ET 200S station arrangement, compatible terminal module, 24 V DC load supply, terminal assignment and connected load requirements before replacement.
Additional industrial automation and electrical part numbers for sourcing reference.
| 6ES7331-7SF00-0AB0 | 6SL3320-1TG28-5AA3 | OP-87431 | IC694MDL231 |
| HACH HQ40D | 1794-TB3S | PS030/200TPE | 6ES5420-4UA14 |
| 6EP3333-6SB00-0AY0 | IC695PNC001-AK | SL30.300 | 3SE5115-1CA00-1AF2 |
| 6FX5002-2EQ10-1AF0 | CMK2-C-20-135 | 6ES5308-3UC11 | DSBG-32-100-PPSA-N3 |
| IC200MDL643 | 1019100000 | 6SN1123-1AA00-0EA2 | LC1D1210P7 |
| HACH DRB200 | 6GK5008-0BA10-1AB2 | EP62 B13 | 1794-0B16EPXT |
| NZM4-XA208-250AC/DC | 6SL3210-1PE34-8AL0 | W2S130-AA01-16 | SGR24/1G |
| 6ES5740-0AA11 | PS003A-504-LI2UPN8X-H1141 | IC695ETM001-LAAA | ZTPE 4/2AN/1 1854970000 |
| 6AV3515-1MA30 | PEL 230/24-4 | IC693PWR330J | 6SE3290-0DC87-0FA4 |
| 6SL3162-2BM01-0AA0 | ADVUL-25-30-PA | HACH 2100Q | 6ES7151-7AA21-0AB0 |
| 1794-0B8EPXT | TR 627 | IC200CHS005 | 6SC6500-0NA04 |
| 5SY4316-7 | RER101-36/14NHH | IC695CPU320-HU | EP63C63 566605 |
| IC694MDL930D | 6SL3320-1TG31-0AA3 | LPJ-35SP | DRT2-OD16TA-1 |
| KP12/8 F10A K00 | UE48-3OS2D2 | IC200MDL240L | SMI472-12 |
| IC693CPU331-CE | IC200ALG230J | XTCE115G | 1794-0B16PXT |
| HACH LICO690 | IC695CHS012 | KWVE25-B | 130B1117 |
| IC694MDL240 | HACH PHC10103 | IC200CHS002L | PVUC 24/24-20 |
| 3603 S162E5/360 | 6ES7132-4BD32-0AA0 | 1019100000 | RER101-36/14NHH |
Related part numbers are provided as sourcing references only. Their appearance in this list does not establish compatibility or interchangeability.
Send your inquiry directly to us