Bently Nevada 330103-00-11-50-02-00 3300 XL 8 mm Proximity Probe
3300 XL 8 mm Proximity Probe
Standard-Mount Proximity Probe
8 mm Probe Tip
Brand Name:
Bently Nevada
3300 XL 8 mm Proximity Probe
,Standard-Mount Proximity Probe
,8 mm Probe Tip
Bently Nevada 330103-00-11-50-02-00 3300 XL 8 mm Proximity Probe
3300 XL 8 mm standard-mount proximity probe with M10 × 1 thread, 110 mm case length, 5.0 m total length and miniature coaxial ClickLoc connector with standard cable.
Product Function
The 3300 XL 8 mm proximity system provides a voltage output proportional to the distance between the probe tip and a conductive target, allowing static position and dynamic vibration measurement. Bently Nevada specifies the system for vibration and position measurement on fluid-film bearing machines, as well as Keyphasor and speed measurement applications.
Application & Fault Scenarios
Used within a 3300 XL 8 mm proximity transducer system for rotating-machinery vibration and position monitoring, including fluid-film bearing machines and Keyphasor-related measurement.
Typical replacement searches involve a failed or damaged probe, connector/cable issue, or loss or abnormality of the monitored vibration or position signal.
A failed probe channel can remove the associated measurement from the monitoring or protection system, so the operational consequence depends on the machine's configured protection logic.
Technical Specifications
Configuration
| Probe construction | Standard-mount, without armor |
| Probe tip diameter | 8 mm |
| Mounting thread | M10 × 1 |
| Unthreaded length option | 00 = 0 mm |
| Overall case length option | 11 = 110 mm |
| Total length option | 50 = 5.0 m (16.4 ft) |
| Connector / cable option | 02 = miniature coaxial ClickLoc connector, standard cable |
| Agency approval option | 00 = not required |
System performance
| Linear range | 2 mm (80 mil) |
| Measurement range | Approximately 0.25 to 2.3 mm from target |
| Recommended radial-vibration gap | −9 Vdc, approximately 1.27 mm (50 mil) |
| Incremental scale factor | 7.87 V/mm (200 mV/mil) ±5% under specified reference conditions |
| Frequency response | 0 to 10 kHz, +0/−3 dB, with up to 305 m of field wiring |
| Minimum flat target | 15.2 mm (0.6 in) diameter |
| Standard probe temperature | −52°C to +177°C (−62°F to +350°F) |
System Configuration
Bently Nevada defines these as the three components of the 3300 XL 8 mm proximity transducer system. The 3300 XL 8 mm system supports interchangeability of probes, extension cables and Proximitor sensors within the system. The 5 m probe configuration is designed for use with the 5 m Proximitor sensor.
Replacement Check
Confirm the M10 × 1 mounting arrangement and 110 mm case configuration.
Confirm the 5.0 m probe configuration and corresponding system components.
After installation, verify the probe gap and channel output using the applicable procedure.
+86 180 2077 6792
For replacement confirmation or quotation, send the complete model information.
FAQ
Is 330103-00-11-50-02-00 a complete 3300 XL 8 mm transducer system?
Can this 5.0 m probe be used with a different system length?
What is the significance of the 02 suffix in this part number?
What is the specified normal probe gap for radial vibration measurement?
What should be checked if the replacement probe gives an abnormal signal?
Related Models
video
Send your inquiry directly to us
