Home
>
Products
>
Bently Nevada
>
Bently Nevada 330101-00-63-10-02-00 8 mm Proximity Probe with API 670 Compliance and Miniature Coaxial ClickLoc Connector
Bently Nevada 330101-00-63-10-02-00 8 mm Proximity Probe with API 670 Compliance and Miniature Coaxial ClickLoc Connector
3300 XL 8mm Proximity Probe Bently Nevada 3500 monitoring system
fluid-film bearing machines axial thrust position tracking
radial vibration monitoring 3300 XL Proximitor Sensor
Place of Origin:
USA
Brand Name:
Bently Nevada
Model Number:
330101-00-63-10-02-00
Contact Us
Request A Quote
Product Details
Model:
330101-00-63-10-02-00
Country Of Origin:
USA
Place Of Shipment:
Xiamen,China
Shipping:
TNT, DHL, FedEx, EMS, UPS
MOQ:
1 Piece
Packaging:
Original New Packaging
Highlight:
3300 XL 8mm Proximity Probe Bently Nevada 3500 monitoring system
,fluid-film bearing machines axial thrust position tracking
,radial vibration monitoring 3300 XL Proximitor Sensor
Payment & Shipping Terms
Minimum Order Quantity
1
Price
66USD
Packaging Details
Brand new and original
Delivery Time
2-3 work days
Payment Terms
T/T
Supply Ability
in stock
RELATED PRODUCTS
Contact Us
Contact Now
Product Description
Bently Nevada 330101-00-63-10-02-00 3300 XL 8 mm Proximity Probe
The Bently Nevada 330101-00-63-10-02-00 is basically used as a direct replacement for Bently Nevada 3300 XL 8mm systems. In real maintenance work, engineers usually pick it when they want a quick swap without reworking the whole setup. The mechanical size stays consistent, so it fits into existing installations without too much adjustment. For sites running critical machinery protection, this kind of drop-in compatibility is actually quite important because downtime is never something people want to stretch.
Key Functions & Capabilities
- Radial Vibration & Thrust Measurement: Works around continuous radial vibration measurement and axial thrust position tracking, and it does it in a non-contact way. So the probe sits close to the shaft, but doesn’t physically touch it. In practice, this setup is often used to keep an eye on early-stage vibration changes before they become a real issue.
- Speed & Keyphasor® Tracking: Handles shaft speed & Keyphasor tracking, giving a stable phase and speed reference for diagnostics. It’s one of those functions that doesn’t look complicated on paper, but in turbine or compressor systems it becomes very useful when engineers try to figure out timing, imbalance, or synchronization behavior.
- High-Linearity Performance: Comes with a 2 mm (80 mils) linear range and a 7.87 V/mm (200 mV/mil) scale factor. Basically, the signal response stays predictable across the working range, which helps the eddy current displacement sensor output remain clean even when operating conditions shift. That stability is one of the reasons the 3300 XL Proximitor Sensor platform is still widely used in industry.
- ClickLoc™ Coaxial Connector: Uses a ClickLoc coaxial connector, gold-plated, and designed for tool-less connection. In field work, this part is usually appreciated because it makes replacement or cable connection a lot faster. When paired with a 3300 XL extension cable, installation feels fairly straightforward without too much re-termination work.
- API 670 Compliant Protection:
- Lower Operational Costs: Lower operational cost usually comes from keeping maintenance simple and avoiding long system downtime. With Bently Nevada 330101 spare parts, replacement is straightforward, especially when working with Bently Nevada 3300 XL 8mm Proximity Probe setups, so teams don’t need extra rework or recalibration in most cases.
- Reliable Spare Parts: Reliable spare parts help keep critical rotating machinery assets running without interruption. Components like the eddy current sensor probe are commonly stocked or sourced quickly to support machinery protection sensor systems in daily operations.
- 24-Hour Support: 24-hour support means technical feedback is usually available within one day, which helps when issues happen in steam & gas turbine monitoring or centrifugal compressor protection environments.
- Rapid Delivery: Fast delivery is mainly about reducing downtime. When a 3300 XL Proximitor Sensor or related part fails, quick replacement keeps production from stopping too long.
- Guaranteed Quality & Warranty: Quality is backed by a 1-year warranty, giving more confidence during installation in a Bently Nevada 3500 monitoring system setup, where stable performance of the eddy current displacement sensor is expected.
Need an Instant Quote?
Technical Specifications
| Category | Specification Item | Technical Data / Specific Value |
|---|---|---|
| Physical & Mechanical | Probe Diameter | 8 mm |
| Thread Type | 3/8-24 UNF | |
| Unthreaded Length 00 | 0.0 in (Fully threaded) | |
| Case Length 63 | 6.3 in | |
| Cable Length 10 | 1.0 metre | |
| Armor Option 00 | Without armor | |
| Connector Type 02 | Miniature coaxial ClickLoc connector | |
| Agency Approval 00 | Not required | |
| Material Specifications | Probe Tip Material | PPS (Polyphenylene sulfide) |
| Probe Case Material | AISI 304 stainless steel | |
| Cable Jacket Material | FEP insulation | |
| Electrical & Performance | Linear Range | 2 mm (80 mils) |
| Linear Range Interval | 0.25 mm to 2.3 mm from probe tip | |
| Incremental Scale Factor | 7.87 V/mm, error plus or minus 5 percent | |
| Calibration Target | AISI 4140 steel | |
| Recommended Gap Setting | 1.27 mm, approx. -9 Vdc | |
| Environmental Limits | Operating Temperature | -35 deg C to +177 deg C |
Frequently Asked Questions
Q1: What are the exact physical and configuration specifications of the Bently Nevada 330101-00-63-10-02-00 proximity probe?
A: The Bently Nevada 330101-00-63-10-02-00 is one of those fully specified 3300 XL 8mm Proximity Probe configurations, and every code in the part number actually means something. The “00” at the end basically points to a 0.0-inch unthreaded section, so you’re looking at a fully threaded 3/8-24 UNF body. Then “63” refers to a 6.3-inch case length, which is pretty standard for this setup. “10” gives you a 1.0-meter cable length. The “02” version comes with an unarmored cable and a miniature coaxial ClickLoc connector, and finally the last “00” means no special agency approvals are included.
Q2: Is the 330101-00-63-10-02-00 compatible as a direct replacement for existing Bently Nevada 3300 XL 8mm systems?
A: Yes, it’s designed exactly for that kind of swap. The Bently Nevada 330101-00-63-10-02-00 works as a direct replacement for existing 3300 XL 8mm systems, and in most cases it just drops in without forcing changes on wiring or mounting. Because the electrical and mechanical layout stays consistent, users usually don’t need to redo calibration work when replacing a damaged 3300 XL Proximitor Sensor setup, which is one of the reasons it’s widely used in maintenance replacements.
Q3: Which monitoring systems and Proximitor sensors interface with the 330101-00-63-10-02-00 probe?
A: This probe is normally paired with a 3300 XL Proximitor Sensor, forming a standard transducer setup with a 1-meter configuration. From there, it connects into larger protection systems like the Bently Nevada 3500 monitoring system, especially modules such as the 3500/40M vibration monitor module and 3500/42M Proximitor Monitor card inside a 3500 rack system. In real plants, this chain is pretty common for machinery protection sensor applications.
Q4: What are the primary machinery measurement functions of the 330101-00-63-10-02-00 sensor?
A: In practice, this eddy current sensor probe is mainly used for radial vibration measurement and axial thrust position tracking. It also handles shaft speed & Keyphasor tracking, which gives a clean phase reference for diagnostics. You’ll usually see it installed on steam & gas turbine monitoring systems or centrifugal compressor protection setups, where keeping track of rotating behavior is critical for avoiding unexpected downtime.
Q5: What is the linear measurement range and scale factor of the 330101-00-63-10-02-00 eddy current probe?
A: The probe offers a 2.0 mm (80 mils) linear range, typically working within a very tight measurement window when installed correctly. Calibration is based on standard target materials like AISI 4140 steel, and the incremental scale factor (ISF) is around 7.87 V/mm (200 mV/mil), with about ±5% tolerance. In real operation, this level of stability is what keeps the eddy current displacement sensor output reliable even when machines are running under load variation.
Q6: Does the 330101-00-63-10-02-00 probe cable come with protective armor, and what is its connector type?
A: No, this version uses the “00” option, so it’s an unarmored FEP insulated cable. That makes it more flexible for routing inside tight spaces like bearing housings. On the connection side, it uses the “02” ClickLoc coaxial connector, gold-plated and miniature in size, which helps keep signal loss low and allows quick tool-less connection to 3300 XL extension cable assemblies.
Related Part Numbers
330103-00-07-05-02-00
330101-00-08-20-02-05
330930-065-01-05
330130-070-00-00
990-05-50-02-01
330130-080-01-05
136483-01
330703-000-060-50-12-00
81544-01
330103-00-06-15-02-CN
82365-01
330130-030-01-CN
82367-01
102044-00-18-10-02
84147-01
144181-50
18622-030-01
3500/42E
330101-30-63-10-02-CN
3500/50E
330104-03-06-05-02-00
330101-30-63-10-02-00
330104-05-15-05-02-00
330130-035-00-CN
330101-00-60-10-02-00
330130-035-01-CN
330709-000-070-10-02-00
330130-045-01-CN
330101-00-56-10-02-00
330104-00-07-05-02-00
330103-00-03-10-02-00
330130-085-01-00
330106-05-30-15-02-CN
40113-02
21000-28-10-00-098-04-02
330130-035-00-00
21000-28-10-00-217-04-02
330130-040-00-CN
330104-00-05-10-02-00
84661-50
RELATED PRODUCTS
video
Send your inquiry directly to us
