AMIKON LIMITED
We'll get back to you as soon as possible.
Place of Origin:
USA
Brand Name:
Allenbradley
The 1503VC IntelliVAC control module operates Bulletin 1502 vacuum contactors used in medium-voltage motor starter and feeder applications. The Series C / D version supports both electrically held and mechanically latched contactor types.
Rockwell Automation identifies 1503VC-BMC4 as the spare-part number for the electrically held and mechanically latched Series C and D module.
Installed in the low-voltage control section of medium-voltage motor controllers, including Rockwell Automation Bulletin 1500/1900 CENTERLINE equipment. It interfaces with Bulletin 1502 vacuum contactors.
Customers may search for this module when a contactor fails to energize, fails to close or open, drops out during operation, or reports a module fault. These symptoms can also involve control power, fuses, wiring, contactor coils, auxiliary feedback or configuration—not necessarily a failed IntelliVAC module.
If the contactor control circuit cannot operate correctly, the associated motor starter or feeder may be unavailable, potentially interrupting the driven process.
Manufacturer-documented Series C / D specifications.
| Parameter | Rating |
|---|---|
| Main AC supply | 110–240 V AC RMS, +10% / -15%, 47–63 Hz |
| Main DC supply | 110–250 V DC, +10% / -15% |
| Maximum idle current, AC | 125 mA |
| Maximum idle current, DC | 35 mA |
| Maximum hold current, AC | 300 mA |
| Maximum hold current, DC | 100 mA |
| Command input voltage | 100–240 V AC RMS / 50–250 V DC |
| Maximum command input on-state current | 9 mA AC / 9 mA DC at 250 V |
| Status output contacts | 250 V AC RMS, 5 A resistive / 2 A reactive; 30 V DC, 5 A resistive / 2 A reactive |
| Internal control fuse | 6.3 A, 250 V; Littlefuse 21506.3 |
| Parameter | Rating |
|---|---|
| Operating temperature | 0 to 60°C ambient at control module |
| Storage temperature | -40 to 85°C |
| Altitude | -1,000 to 5,000 m |
| Humidity | 95% non-condensing |
| Pollution level | Pollution Degree 2 |
| Operational shock | 15 g peak, 11 ms |
| Operational vibration | 10–57 Hz: 0.015 in peak-to-peak; 57–150 Hz: 2.5 g |
| Dimensions | Approx. 185.3 × 165.9 × 59.4 mm (drawing dimensions) |
| Mounting | Two mounting screws |
The module is configured by DIP switches located inside the enclosure. The firmware version is displayed above the DIP switches.
Confirm the series letter on the module label before ordering or replacing the unit. Series C and D are distinct configurations even though both use the 1503VC-BMC4 spare-part number.
The module provides separate Module Status and Contactor Status LED indications, together with corresponding status relay outputs.
| Observed condition | Checks indicated in the manual |
|---|---|
| Contactor does not energize | Check control power, control-circuit connections, power input plug and internal fuse. |
| Contactor fails to close | Check coil condition, loose connections, auxiliary contact adjustment and mechanical obstruction. |
| Contactor drops out during operation | Check motor protection, stop command, control voltage, TDUV conditions and contactor status feedback. |
| Module fault indication | Check DIP switch configuration and control power; follow the Series C or Series D LED status table. |
A fault indication does not by itself establish that the module is defective. Follow the Series C / D troubleshooting procedure before replacement.
We support industrial spare-parts sourcing with order verification and practical shipment coordination.
Warranty: 12 months, subject to the terms stated in the quotation. Coverage and supplied condition are confirmed per order.
AMIKON helps maintenance teams, purchasing departments and industrial service providers source control components and automation spare parts. Share the complete part number and equipment details to help us check your request accurately.
Please include the following details for a more accurate quotation:
Both are identified by Rockwell Automation under the BMC4 spare-part number. Series D includes firmware enhancements related mainly to fault and warning handling. Series C uses firmware 2.003; Series D uses 3.001 or 3.002, which is not compatible with other series-letter modules.
The Series C / D IntelliVAC is documented for Bulletin 1502 medium-voltage vacuum contactors, including 400 A and 800 A ratings, with electrically held and mechanically latched arrangements.
Configuration is performed using DIP switches located inside the enclosure. The correct settings depend on the contactor and application; refer to the Series C / D user manual.
The manufacturer troubleshooting guide identifies possible checks including control power, the internal fuse, coil condition, loose connections, auxiliary contact adjustment and mechanical obstruction. A module replacement should follow diagnosis.
Confirm the full catalog number, Series C or D label, installed contactor type and rating, control supply, and the existing configuration. These details help reduce replacement mismatches.
Additional part numbers from the supplied sourcing list. These are reference items only and do not indicate compatibility or interchangeability with this product.
| Model / Reference | Model / Reference | Model / Reference |
|---|---|---|
| X20DO4529 | OFI-3 | Siemens 6ES5440-8MA22 |
| MCR-SL-PT100-LP-NC | X20TB1E | HACH 2100P |
| 8BVI0028HWS0.000-1 | Cisco 4G-AE010-R | X20D02623 |
| TF65-40 1SAZ811201R1003 | AB6203-B | HID 70200AEP0N |
| X67BCE321.L12 | ABB DI810 3BSE008508R1 | ET1212PPH-S-DR |
| BWU2234 | AB7006-B | DAWE D-1422C |
| Siemens AQR2531ANW | 7XV116.50-51 | ABB BT2 3N-40-320-P 2TAM103100R4500 |
| HACH 2612602 | X20TB5F | 175G5122 SKKT92/16 |
| PR 2261 | 4PP065.0571-X74 | Honeywell XF521 |
| IB IL RS232 | X20TB32 | Conzerv EM6400 |
| DI524 1SAP240000R0001 | Norgren F72G-3AS-001 | MQSPS-DH-1-30 |
| DAWE D-1422C | X20DO2623 | Cisco 07-1144-01 |
| Flender Loher 0220401 | ER40 82120AKI000 | Telemecanique LR2D1321 |
| AC123 | BWU2192 | 7DM465.76 |
| AB7694-F | 8AC120.60-1 | 3IF787.9-1 |
| HACH PHC281 | FSM500 K/T(E) | Allen-Bradley 889D-F4AC-2 |
Send your inquiry directly to us