Siemens 6DR5510-0EG00-0AA0 SIPART PS2 PA PROFIBUS PA Electropneumatic Positioner
Siemens SIPART PS2 PA
Siemens Electropneumatic Positioner
6DR5510-0EG00-0AA0 datasheet
Place of Origin:
Germany
Brand Name:
Siemens
Siemens SIPART PS2 PA
,Siemens Electropneumatic Positioner
,6DR5510-0EG00-0AA0 datasheet
AMIKON Industrial Supply / Siemens SIPART
Siemens 6DR5510-0EG00-0AA0
SIPART PS2 PA Electropneumatic Positioner · PROFIBUS PA · Single-Acting · Intrinsic Safety
Technical Specifications
Confirmed configuration details for the specified order number.
| Order number | 6DR5510-0EG00-0AA0 |
| Product type | Intelligent electropneumatic positioner |
| Communication | PROFIBUS PA |
| Actuator operation | Single-acting |
| Actuator types | Pneumatic linear and part-turn actuators |
| Enclosure material | Polycarbonate |
| Explosion protection | Intrinsic safety, Ex i |
| Electrical connection | M20 × 1.5 |
| Pneumatic connection | G 1/4 |
| Auxiliary / bus supply marking | 9–24 V |
| Supply pressure marking | 1.4–7 bar |
| Enclosure protection marking | IP66 / NEMA Type 4X |
| Limit monitor | Not included in this configuration |
| Option module | Not included in this configuration |
| Pressure gauge block / booster | Not included |
| Operating instructions | Brief instructions in English, German and Chinese |
Additional nameplate and safety information
| ATEX marking shown in manual example | II 2 G EEx ia/ib IIC T6/T5/T4 |
| Temperature class examples | T6: −30 to +50°C; T5: −30 to +65°C; T4: −30 to +80°C |
| ATEX certificate reference shown | TÜV 00 ATEX 1654 |
| Additional approval references shown | IECEx TUN 04.0018; FM / CSA hazardous-area markings |
Approval markings and temperature limits must be checked against the actual device nameplate and applicable certificate before installation. The listed values reproduce the documented nameplate example and are not a substitute for checking the supplied unit.
Configuration & Equipment Interface
Control and actuator interface
The positioner receives positioning commands through PROFIBUS PA and controls the pneumatic output for a compatible single-acting actuator. It is intended for linear or part-turn pneumatic actuator arrangements.
Connection arrangement
The specified configuration has an M20 × 1.5 electrical entry and a G 1/4 pneumatic connection. The limit monitor, option module and pressure gauge block / booster are not included.
Installation & Commissioning Considerations
Before installation
- Confirm the complete order number and Ex i suitability for the installation area.
- Check the actuator is single-acting and that its mounting arrangement matches the positioner.
- Verify the PROFIBUS PA segment design and the approved electrical installation method.
- Check the pneumatic supply and connection requirements against the equipment documentation.
During commissioning
- Follow the applicable Siemens operating instructions and hazardous-area installation requirements.
- Check actuator movement, direction of travel and fail-safe response.
- Verify communication and device status through the control system.
- Complete calibration and functional checks before returning the valve to service.
For single-acting operation, the documented fail-safe arrangement depressurizes the actuator when electrical auxiliary power fails. Confirm that this behavior matches the process safety requirements before commissioning.
Application & Failure Scenarios
Typical system context: The SIPART PS2 PA is used in process automation as a valve positioner on pneumatic linear or part-turn actuators. PROFIBUS PA provides the digital communication interface between the positioner and the control system.
Why this part may be searched: A plant may need this exact order number when a valve positioner has failed, actuator positioning becomes unreliable, PA communication is lost, or a maintenance team needs to replace an installed unit with the same configuration.
Potential downtime risk: An unavailable or incorrectly matched positioner can prevent a control valve from reaching its commanded position. Depending on the process function, this may interrupt flow regulation, reduce process stability or require the affected equipment to be taken out of service.
Frequently Asked Questions
1. Is this model designed for single-acting actuators?
2. What are the electrical and pneumatic connection sizes?
3. Does 6DR5510-0EG00-0AA0 include a limit monitor or option module?
4. What should be checked before ordering a replacement?
Related Models
About AMIKON
Industrial Automation Parts, Ready When Needed.
AMIKON Industrial Supply supports industrial maintenance and procurement teams with sourcing assistance for automation and control equipment.
Our team helps review part-number details, confirm order requirements and coordinate practical supply arrangements for replacement components.
Send the equipment label or full order number when configuration verification is required.
Contact · Miya Zheng
Supplied units are checked before dispatch and packed for transport. DOA or return requests are reviewed against the order condition and reported evidence. Warranty is 12 months, subject to quotation terms and confirmed product condition.
RFQ RequirementsPlease provide: Part Number · Quantity · Destination · Required Date · Machine/System Model.
video
video
video
Send your inquiry directly to us
