logo
Home > Products > Hima >
HIMA F60 CPU 01 Central Processing Module for HIMatrix F60

HIMA F60 CPU 01 Central Processing Module for HIMatrix F60

F60 CPU 01 SAFETY-RELATED

HIMatrix F60 CPU 01

HIMatrix F60 F60 CPU 01

Place of Origin:

GERMANY

Brand Name:

HIMA

Model Number:

F60 CPU 01

Contact Us
Request A Quote
Product Details
Highlight:

F60 CPU 01 SAFETY-RELATED

,

HIMatrix F60 CPU 01

,

HIMatrix F60 F60 CPU 01

Payment & Shipping Terms
Minimum Order Quantity
1
Packaging Details
Brand new and original
Delivery Time
2-3 work days
Payment Terms
T/T
Supply Ability
in Stock
Product Description
HIMA · HIMatrix SAFETY SYSTEM
F60 CPU 01
Central Processing Module for HIMatrix F60
SAFETY-RELATED CONTROL HIMatrix F60
CPU
F60 / 01

01 / CENTRAL CONTROL
The Processing Core of the F60 System
The HIMA F60 CPU 01 is the central module of the HIMatrix F60 controller. It stores the operating system and user program, executes central control functions and manages communication with the PADT and connected systems.
CONTROL RESPONSIBILITY
Program Execution · System Monitoring · Communication
02 / HARDWARE INTERFACES
Communication at a Glance
4 ×
RJ-45 Ethernet
10BASE-T / 100BASE-TX
2 ×
D-sub Fieldbus
Pluggable submodules
OPERATING VOLTAGE
24 V DC
-15% to +20% rated range
03 / OPERATING CHARACTERISTICS
Designed for Safety-Related Control Tasks
RESPONSE TIME
≥ 20 ms
AMBIENT TEMP.
0–60°C
STORAGE TEMP.
-40–85°C
MODULE WEIGHT
280 g
The CPU monitors operating voltage and internal operating conditions. Its user-memory capacity depends on the installed software version.
04 / SOFTWARE VERSION MATTERS
User Memory Changes by Version
Do not assume that every F60 CPU 01 installation has the same user-memory capacity.
UP TO VERSION 6.46
500 kB
Program + Data each
VERSION 6.100
2047 kB
Program + Data each
VERSION 7+
1023 kB
Program + Data each
AMIKON PRODUCT SUPPORT
Looking for HIMA F60 CPU 01?
Send your part number and required quantity.
EMAIL SALES ↗ WHATSAPP ↗
05 / HIMatrix F60 ARCHITECTURE
Where F60 CPU 01 Sits in the Controller
POWER
F60-PS
Power Supply
CENTRAL CPU
F60 CPU 01
Processing Core
I/O LEVEL
I/O Modules
Signal Interface
ENGINEERING
PADT
Configuration Tool
The CPU occupies the designated slot next to the power supply in the HIMatrix F60 subrack. Slot position, software generation and connected I/O configuration matter when planning a replacement.
06 / ENGINEERING & PROCUREMENT FAQ
Questions Worth Checking Before Replacement
Q1
Can HIMA F60 CPU 01 be replaced by F60 CPU 03 SILworX?
Do not assume a direct exchange. The CPU generation, operating system, engineering environment, project configuration and system certification all need to match the installed F60 application. Confirm the exact controller version before considering a different CPU variant.
Q2
Why does HIMA F60 CPU 01 have different memory capacities across installations?
The available user memory depends on the software version. Earlier versions up to 6.46, version 6.100 and version 7 or later have different program and data capacities. Check the installed version rather than relying on a single capacity figure.
Q3
What should be checked about the fieldbus ports on HIMA F60 CPU 01?
The module has two 9-pin D-sub fieldbus interfaces with pluggable submodules. The actual fieldbus function depends on the fitted submodules and project configuration, so connector shape alone does not establish protocol compatibility.
Q4
What happens if the 24 V DC supply to HIMA F60 CPU 01 drops?
The CPU monitors its operating voltage. The documented thresholds distinguish normal operation, an alarm state below 18 V and shutdown below 13 V. Investigate the power supply and wiring before attributing a shutdown to CPU failure.
Q5
What must be preserved before replacing HIMA F60 CPU 01?
Confirm the project backup, software version, system ID, IP settings, fieldbus submodules and installed I/O arrangement. A safety-related controller should only be replaced and recommissioned by qualified personnel following the approved site procedure and required safety validation.
SALES MANAGER
Miya Zheng
sales@amikon.cn
EMAIL SALES WHATSAPP
Amikon Industrial Automation Support
AMIKON TECHNOLOGY
Founded in 2005
Two decades of dedication to industrial automation parts and control system components.
GLOBAL PARTS SUPPLIER
A Broad Range of Automation Components
Amikon Technology was founded in Hong Kong in 2005. Our team serves customers worldwide with industrial automation parts and control system components.
PRODUCT CATEGORIES
PLC · HMI · DCS
Panel Controllers
Industrial PCs · VFD Parts
20 YEARS
Industry Experience
GLOBAL SUPPLY
International Customers
PARTS SUPPORT
Hard-to-Find Components
EXPLORE MORE AUTOMATION COMPONENTS
Recommended Models
Browse additional industrial control and automation parts.
mv1417 SAI143-S03 RC-5MS-1
Mn4000 E9665EX-08 GW 90821
PCO3000BL0 FIS-6801-1500G SCP451-11
PMU2W/48 BMXNOE0110 M340 130B7493
Z043.584/02 MMI20013514 AAI835-H00
CL-530-02 6ES7647-7AA20-0PA0 RSM32F
SSMX-15-G DE1-34011FN-N20N ICED6
Z035.263/04 FM-553-02 SAI143-H03
WRT-847B/67-69 JASP-WRCA01B 1VCF339752S5909
6FC5603-0AD00-0AA2 Z4KENCF3 800-001-6010
SCM-330-2-02 LSC-X21-02M RC-EIO2-AIAO-D
703-1178 MMI05OEE1 592-EEFC
Z043.584/02 CLEA2014B32 5225-000-Otdr-1
BSSBLU16 Mn4000 PMU2W/48
More Popular Models
Discover more automation parts for your applications.
EXPLORE MORE ↗
AMIKON TECHNOLOGY · International Delivery on the Day · Quick Response Support · Intercontinental Cooperation Network

Send your inquiry directly to us