The 330102-00-12-10-01-05 is an armored 3300 XL 8 mm eddy-current proximity probe. In a complete matched transducer system, it supports static shaft position and dynamic relative vibration measurements on conductive targets without physical contact.
System scope: this order number covers the probe component. A compatible extension cable and 3300 XL Proximitor Sensor complete the measurement channel.
02 / SIGNAL PATH
A
330102 PROBEEddy-current interaction at the shaft
B
EXTENSION CABLECompletes the intended system length
C
PROXIMITORConverts gap into proportional voltage
D
MONITORProcesses vibration or position
The 1.0 m order-code value is the integral probe lead, not the complete 5 m or 9 m transducer-system length.
03 / TECHNICAL
Configuration and performance
Base 330102
8 mm probe, 3/8-24 UNF-2A thread, armored lead
Code 00
0.0 in unthreaded length
Code 12
1.2 in (30.5 mm) overall case length
Code 10
1.0 m (3.3 ft) total probe length
Code 01
ClickLoc coaxial connector with protector, standard cable
Code 05
Multiple approvals configuration
Linear range
2.0 mm (80 mils)
Nominal sensitivity
7.87 V/mm (200 mV/mil) in the complete calibrated system
Frequency response
0 to 10 kHz, with 0 to 1 kHz option
Probe temperature
-51 to +177 degrees C operating and storage
04 / CHECKS
Replacement checkpoints
THREADConfirm 3/8-24 UNF, not M10 x 1.
GEOMETRYMatch zero unthreaded length and 1.2 in case.
SYSTEMVerify cable and Proximitor length marking.
GAPSet and confirm stable gap voltage.
05 / SERVICE
AMIKON industrial parts support
20 YEARSExperience with scarce industrial parts.
URGENT DISPATCHFast handling for critical requirements.
PARTS HELPAssistance with difficult part numbers.
12-month warranty and return supportContact us within 7 days if an issue is found. Keep the item in original condition and state the return reason. A refund or replacement can be arranged after receipt and inspection. Return shipping is handled by the buyer.