Bently Nevada 330130-080-03-05 3300 XL Standard Extension Cable
3300 XL Standard Extension Cable
3300 XL 8 mm Proximity Transducer System
330130-080-03-05 datasheet
Brand Name:
Bently Nevada
3300 XL Standard Extension Cable
,3300 XL 8 mm Proximity Transducer System
,330130-080-03-05 datasheet
Bently Nevada
330130-080-03-05
Standard extension cable for 3300 XL 8 mm proximity transducer systems. Confirm the installed system configuration and approval requirements before replacement.
01 / Product DefinitionProduct Overview
This extension cable forms part of a proximity measurement chain, connecting a compatible probe to its Proximitor Sensor. The system supports machinery vibration, position and speed-related measurement applications.
Check the complete probe, extension cable and sensor configuration as a system. Matching one cable specification alone does not establish compatibility.
02 / Engineering DataTechnical Specifications
| Cable electrical construction | 75 Ω triaxial cable with FEP insulation |
|---|---|
| Typical capacitance | 69.9 pF/m (21.3 pF/ft) |
| Measurement principle | The proximity transducer system produces an output voltage proportional to the distance between the probe tip and the observed conductive surface. |
| Measurement types | Static measurements, including position, and dynamic measurements, including vibration |
| System components | 3300 XL 8 mm probe, extension cable and 3300 XL Proximitor Sensor |
Additional system configuration and installation notes
- Total system length: the probe length and extension cable length must be considered together and matched to the specified Proximitor Sensor configuration.
- Component matching: the manufacturer describes interchangeability within the 3300 XL 8 mm system. Confirm the exact component families and installed configuration before applying this principle to a replacement.
- Signal purpose: the system can provide vibration and shaft-position measurements, as well as Keyphasor reference and speed measurements, depending on the installation.
- Installation inspection: check cable routing, connector seating, mechanical clearance and the condition of exposed cable protection.
- Approval verification: check the required hazardous-area certification against the equipment location and the applicable manufacturer documentation.
- Use the applicable manufacturer instructions for installation, commissioning and troubleshooting. System-level characteristics should not be interpreted as a substitute for the exact component specifications.
03 / Operating ContextApplication & Failure Scenarios
Machinery condition monitoring
Used in proximity measurement installations on rotating machinery, including equipment with fluid-film bearings. The monitoring chain can support vibration and shaft-position measurements, as well as reference and speed-related signals.
Intermittent or missing signal — inspect the cable and connectors while isolating the fault across the transducer circuit.
Damaged cable protection or connector — assess the mechanical condition and determine whether replacement is necessary.
Planned shutdown or maintenance — confirm the exact cable configuration and system requirements before ordering.
Loss of a required monitoring signal may reduce machinery condition visibility and delay fault assessment. Actual shutdown consequences depend on the monitored equipment and plant protection strategy.
04 / Supply AssuranceDelivery, Inspection & Warranty
Inspection: AMIKON can coordinate product identification and appropriate pre-shipment checks for the quoted item. Inspection scope and findings should be confirmed with the quotation.
Packaging: Protective packaging is arranged for transport according to the quoted supply conditions.
DOA and returns: Report suspected dead-on-arrival conditions promptly with the order reference, photographs and fault details. Return authorization and remedies are subject to the confirmed terms.
Warranty: 12 months, subject to quotation terms and applicable coverage conditions. Confirm exclusions and the claims procedure before purchase.
05 / Direct AssistanceContact AMIKON
A Real Person to Help with Your Parts Inquiry
Contact Miya Zheng for sourcing assistance, product identification and quotation coordination. Share your equipment details to help clarify the required configuration.
Miya Zheng
Please include Part Number, Quantity, Destination, Required Date and Machine/System Model in your inquiry.
06 / Common QuestionsFrequently Asked Questions
1. Which monitoring system uses this cable?
It belongs to the 3300 XL 8 mm proximity transducer system and connects a compatible probe to its Proximitor Sensor.
2. Can another 330130 cable be used as a replacement?
Not based on the family number alone. Check the required length, cable construction, connector protection, system configuration and approvals before substitution.
3. What should be checked when the monitoring signal disappears?
Inspect the cable and connectors, then use the applicable troubleshooting procedure to distinguish cable damage from probe, sensor or other circuit faults.
4. What information should I send for a quotation?
Provide the complete part number, quantity, destination, required date and machine/system model so AMIKON can review the sourcing request.
07 / Sourcing DirectoryRelated Models
The following is a de-duplicated selection from the supplied model list. Listings are for sourcing navigation only and do not indicate technical compatibility.
Expand the model directory
video
Send your inquiry directly to us
