Bently Nevada 330703-000-090-50-02-00 3300 XL 11 mm Proximity Probe
Bently Nevada 3300 XL 11 mm Proximity Probe
5.0 m Total Cable Length
330703-000-090-50-02-00 pdf
Brand Name:
Bently Nevada
Bently Nevada 3300 XL 11 mm Proximity Probe
,5.0 m Total Cable Length
,330703-000-090-50-02-00 pdf
Bently Nevada 330703-000-090-50-02-00
3300 XL 11 mm Proximity Probe
|
Product Family
3300 XL
|
Probe Type
11 mm
|
Mounting Thread
M14 × 1.5
|
Cable Length
5.0 m
|
Product Overview
The 3300 XL 11 mm transducer system is designed for non-contact measurement of vibration and displacement on rotating machinery. System performance depends on the complete transducer configuration and the manufacturer's specified test conditions.
Applications & Fault Scenarios
| Axial Position Thrust-position measurement on rotating machinery. | Steam Turbines Ramp differential-expansion measurement. |
| Reciprocating Compressors Rod-position or rod-drop measurement. | Speed & Phase Reference Tachometer, zero-speed and Keyphasor signals. |
Maintenance teams may search for this probe when a measurement signal becomes unstable or unavailable, cable or probe damage is suspected, or scheduled replacement is required. Loss of monitoring data can delay condition assessment and fault diagnosis; the symptom alone does not confirm probe failure.
Technical Specifications
Manufacturer-published probe details and system-level specifications.
A. Exact Model & Probe Construction
| Parameter | Confirmed Value |
|---|---|
| Complete part number | 330703-000-090-50-02-00 |
| Product description | 3300 XL 11 mm proximity probe |
| Thread / mounting | Metric M14 × 1.5, standard mount |
| Armor | Without armor |
| Unthreaded length option | 000 = 0 mm |
| Overall case length option | 090 = 90 mm |
| Total cable length option | 50 = 5.0 m |
| Connector / cable option | 02 = miniature coaxial ClickLoc connector, standard cable, without connector protector |
| Agency approval option | 00 = agency approval option not required |
| Probe tip material | Polyphenylene sulfide (PPS) |
| Probe case material | AISI 304 stainless steel |
| Probe cable construction | 75 Ω triaxial cable, FEP insulated |
| Connector material | Gold-plated brass |
| Standard-mount locknut | Pre-drilled safety-wire holes; 22 mm locknut and 12 mm wrench flats for standard M14 × 1.5 probes |
B. Measurement & Electrical Performance
These values apply to the complete 3300 XL 11 mm transducer system under the manufacturer's stated conditions unless otherwise noted.
| Parameter | Published Specification |
|---|---|
| Measurement type | Non-contact vibration and displacement measurement |
| Frequency range | 0 to 8 kHz |
| Linear range | 4.0 mm (160 mil), approximately 0.5–4.5 mm from target |
| Extended DSL range | Approximately 0.5–5.0 mm; not applicable with Zener barriers |
| Recommended gap setting | 2.5 mm (100 mil) |
| Incremental scale factor | 3.94 V/mm (100 mV/mil), ±10% under stated conditions |
| Standard deviation from straight line | Less than ±0.10 mm (±4 mil) |
| Extended deviation from straight line | Less than ±0.15 mm (±6 mil), subject to range limitations |
| Frequency response | 0–8 kHz, +0/−3 dB typical, with up to 305 m field wiring |
| Proximitor Sensor supply | −17.5 to −26 Vdc without barriers, maximum 12 mA; −23 to −26 Vdc with barriers |
| Proximitor Sensor output resistance | 50 Ω |
| Probe DC resistance, 5 m version | 7.2 ± 0.8 Ω, centre conductor to outer conductor |
| Extension cable capacitance | 69.9 pF/m typical |
| Field wiring | 0.2–1.5 mm² (16–24 AWG); three-conductor shielded triad cable recommended |
| Maximum stated sensor-to-monitor distance | 305 m |
C. Mechanical, Installation & Environmental Limits
| Parameter | Published Specification |
|---|---|
| Recommended M14 × 1.5 case torque | 21.1 N·m (187 in·lb) |
| Maximum rated M14 × 1.5 case torque | 63.3 N·m (560 in·lb) |
| Maximum M14 × 1.5 thread engagement | 21 mm |
| Minimum cable bend radius | 25.4 mm (1.0 in), with or without stainless-steel armor |
| Connector-to-connector tightening | Finger-tight recommended; maximum 0.565 N·m (5 in·lb) |
| Probe operating and storage temperature | −52°C to +177°C |
| Low-temperature seal caution | Exposure below −34°C may cause premature pressure-seal failure |
| Pressure-sealing design | Designed to seal differential pressure between probe tip and case; Viton O-ring seal |
| Pressure test before shipment | Manufacturer states probes are not pressure-tested before shipment |
Follow the manufacturer's installation limits. Excessive thread engagement may cause binding; confirm the installed mounting arrangement before replacement.
D. System Configuration & Compatibility
| Item | Manufacturer Guidance |
|---|---|
| Transducer system | The system comprises a probe, extension cable and Proximitor Sensor. |
| 5 m configuration | The 5 m probe option is designed for use with a 5 m Proximitor Sensor configuration. |
| 7200-series upgrade | The manufacturer specifies replacing all transducer-system components with 3300 XL 11 mm components and updating the monitoring system as required. |
| 3500 Monitoring System | The configuration software must list the 3300 XL 11 mm system as a compatible option. |
| Existing 3300 Monitoring System | Modification may be required. |
| Test target conditions | Published accuracy and interchangeability specifications use stated test conditions, including an AISI 4140 steel target at least 31 mm in diameter and a 2.5 mm gap. Different target materials may affect applicability. |
Technical reference: Bently Nevada / Baker Hughes, 3300 XL 11 mm Proximity Transducer System Datasheet 146256 Rev. T. System-level values should not be interpreted as independent test results for an individual probe.
Delivery, Warranty & RFQ
| Delivery & Warranty | Quotation Requirements |
|---|---|
|
|
Industrial Supply, Simplified.
Clear model identification, practical RFQ communication and coordinated industrial parts sourcing.
Frequently Asked Questions
1. What does the complete code 330703-000-090-50-02-00 specify?
It identifies a metric M14 × 1.5 unarmored 3300 XL 11 mm probe with a 0 mm unthreaded length, 90 mm case length, 5.0 m total cable length, a miniature coaxial ClickLoc connector with standard cable and no connector protector, and agency approval option 00.
2. What linear range is published for the 3300 XL 11 mm system?
The published linear range is 4.0 mm, with a nominal incremental scale factor of 3.94 V/mm (100 mV/mil) under the stated system test conditions.
3. Which applications are listed for the 3300 XL 11 mm system?
Published applications include axial-position measurement, steam-turbine ramp differential expansion, reciprocating-compressor rod position or rod drop, tachometer and zero-speed measurement, and Keyphasor phase-reference signals.
4. What should be checked before replacing this 5 m probe?
Check the matching 5 m Proximitor Sensor configuration, extension cable, target material and gap conditions, monitoring-system compatibility, and mounting dimensions.
5. Are the probes pressure-tested before shipment?
The manufacturer states that probes are not pressure-tested before shipment. Confirm any application-specific pressure-test requirements before ordering.
Related Models
Additional model references supplied for your catalog. These are not confirmed compatible replacements for this probe.
Expand model list
| X20AI8221 | HACH TL2360 | Siemens 6AV7890-0BE00-1AB0 | 6SL3210-1PE28-8AL0 |
| SEW R87 DRN90L4/BE5 | JOST JVC 134-63 | HACH DR4900 | 6SE7023-4TC84-1HF3 |
| 142821 03.5900-010.002 IF59-A2E | SEW KA67/T DRN100LS4/BE5/TH | X20BR9300 | HACH PHC805 |
| Siemens 1HU 3106-0SD01-Z | 6SL3220-1YD34-0UB0 | HACH 2612602 | SEW FAF57 DRE132S4/TF |
| Converteam ALSPA MD2000 144-400 | Siemens 6RA2232-6GV62-0 | X20D06325 | HACH SENSION156 |
| Siemens 6AV7615-0AB32-0AG0 | HACH 2100P | X20S06300 | Siemens 1FT6105-8AF71-1DG0 |
| Siemens 3VA2712-6AB05-0AA0 | HACH CDC40105 | X20D08332 | Samson 3271 + 3241-02 |
| SEW KA67/T DRN100L4/TH | Lenze 7913 3292247 | X20DO4322 | HACH LICO500 |
| 6SL3220-1YD36-0UB0 | ABB ACS600 ACS60101006 S00C1200901 | X20BM23 | HACH PHC281 |
| 6SL3210-1PE24-5UL0 | Siemens 6RA2228-6GS22-0 | X20CS2770 | HACH 1900C |
| HACH ISENH3181 | Siemens 1FT5102-0AC71-2-Z | GWK teco cs 140e | Rexroth MHD112C-058-NP3-AN |
| Wittmann TR7B7D7D0X 02 00 MF-DISCO-1 | Siemens 1FT6105-8AB71-2EA0 | ADF104B-B05TB1-DS07-A2N2 | Allweiler SPF/M40R46-W16 |
| Moeller DF4-341-22K DE4-NET-K DE4-LZ3-22K | SEW EURODRIVE R77 DT100LS4/BMG | Perske KCS 72.28-2D | 6SL3210-1PE31-5UL0 |
| Siemens 1AV2130A 1LE1001-1CA03-4AB4 | Bonfiglioli Vectron VER/S 400-150 | X20D04322 | 6SL3210-1PE31-5AL0 |
| SEW R77 DRN90L4/BE5 | Siemens 1FT6105-8AB71-1EA0 | TAE Drive Technology TA-BL-20/1Q | 6SL3210-1PE28-8AL0 |
| H-4WEH 32 HE63/6EG24N9K4 R900943121 | SEW FAF77 DRE100L2/LN | HACH LQV157 | Perske KS 81.26-2D |
| Siemens 6RA2232-6GV62-0 | SEW FAF57 DRE132S4/TF | HACH DR2800 | Siemens 6AV7615-0AB32-0AG0 |
| Schwab 006P062-L-A1 | Siemens 6AV7890-0BE00-1AB0 | Siemens 1FT6105-8AB71-1EA0 | SEW KHZ87/R CM90S/BR/TF/AS1H/KK |
video
Send your inquiry directly to us
