NTAI06

Other Videos
December 01, 2025
Category Connection: ABB PLC
Brief: Stay tuned as we highlight the most important features and real-use results. In this video, we demonstrate the ABB NTAI06 Analog Input Termination Unit, showing how it mounts in an NFTP01 panel and connects via a Y-shaped cable to the slave module. You'll see the jumper configuration process for different input signals and learn about its support for up to 16 analog inputs over a 60-meter distance.
Related Product Features:
  • Mounts in an NFTP01 Field Termination Panel as a single printed circuit board.
  • Connects to the slave module via a standard factory-wired Y-shaped cable.
  • Supports up to 16 analog inputs, configurable as differential or single-ended.
  • On-board compression fitting terminal blocks for field wiring.
  • Provides input channel transient and surge protection for reliability.
  • Features jumper configuration for system-powered or externally powered 4-20 mA inputs.
  • Supports thermocouples with local cold junction reference.
  • Operates at distances up to 60 meters from the IMASI03 module.
FAQs:
  • What type of panel does the NTAI06 mount into?
    The NTAI06 is a single printed circuit board designed to mount in an NFTP01 Field Termination Panel.
  • How many analog inputs does the NTAI06 support?
    The NTAI06 supports up to 16 analog inputs, with each voltage input configurable as differential or single-ended.
  • What is the maximum distance the NTAI06 can be located from the IMASI03 module?
    The NTAI06 can be located up to 60 meters (200 feet) from the IMASI03 module when connected using the specified NKAS01 or NKAS11 cables.
  • How are the input signals configured on the NTAI06?
    Input signals are configured using jumpers on the NTAI06 to match the type of input signal, including system-powered 4-20 mA, field-powered 4-20 mA, single-ended voltage, differential voltage, and 3-wire RTDs.