Hogar
>
productos
>
DOBLADAMENTE NEVADA
>
Bently Nevada 330103-10-14-10-02-05 3300 XL 8 mm Proximity Probe with Non-Contact Sensing and API 670 Compliance for Industrial Machinery
Bently Nevada 330103-10-14-10-02-05 3300 XL 8 mm Proximity Probe with Non-Contact Sensing and API 670 Compliance for Industrial Machinery
3300 XL 8mm Proximity Probe eddy current sensor
shaft vibration measurement gas turbine protection
steam turbine monitoring 3300 XL Proximitor Sensor
Lugar de origen:
EE.UU
Nombre de la marca:
Bently Nevada
Número de modelo:
330103-10-14-10-02-05
Éntrenos en contacto con
Pida una cita
Detalles del producto
Modelo:
330103-10-14-10-02-05
País natal:
EE.UU
Lugar de envío:
Xiamén, China
Envío:
TNT, DHL, FedEx, EMS, UPS
Cantidad mínima de pedido:
1 pieza
Embalaje:
Nuevo embalaje original.
Resaltar:
3300 XL 8mm Proximity Probe eddy current sensor
,shaft vibration measurement gas turbine protection
,steam turbine monitoring 3300 XL Proximitor Sensor
Pago y términos de envío
Cantidad de orden mínima
1
Precio
66USD
Detalles de empaquetado
Nuevo y original
Tiempo de entrega
2-3 días laborables
Condiciones de pago
T/T
Capacidad de la fuente
En stock
Productos relacionados
Vídeo
Bently Nevada 330104-19-25-10-11-05 3300 XL 8 mm Eddy Current Proximity Probe
Consiga el mejor precio
Vídeo
Bently Nevada 330104-15-23-10-02-00 8 mm Proximity Probe with API 670 Compliance and Miniature ClickLoc Coaxial Connector
Consiga el mejor precio
Vídeo
Bently Nevada 136719-01 Dual-Channel Intrinsically Safe Hot-Swappable Earthing I/O Module for 3500 Series
Consiga el mejor precio
Éntrenos en contacto con
Contacto ahora
Descripción de producto
Bently Nevada 330103-10-14-10-02-05 3300 XL 8 mm Proximity Probe
Technical Specifications
| Parameter | Technical Value |
|---|---|
| Model Number | 330103-10-14-10-02-05 |
| Unthreaded Length (1 0) | 100 mm |
| Overall Case Length (1 4) | 140 mm |
| Total Length (1 0) | 1.0 meter (3.3 feet) |
| Connector & Cable Type (0 2) | Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval (0 5) | Multiple Approvals (ATEX, IECEx, CSA hazardous area ratings) |
| Linear Range | 2.0 mm (80 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ± 5% (Standard 1m system) |
| Standard Target Material Calibration | AISI 4140 Steel |
| Frequency Response | 0 to 10 kHz; +0, -3 dB |
| System Input Voltage (via Proximitor) | -17.5 Vdc to -26 Vdc (Nominal -24 Vdc) |
| Maximum Current Consumption | 12 mA |
| Output Impedance | 50 Ω |
| Operating & Storage Temperature | -51 °C to +177 °C (-60 °F to +350 °F) |
| Material/Construction | Specifics regarding tip, case, cable, and connector available in technical documentation |
| Connector Recommended Torque | Finger-tight (ClickLoc mechanism), max 0.565 N*m (5 in*lbf) |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Industry Standard Compliance | Fully compliant with API 670 Standard specifications |
Contact Us for Pricing or Technical Support
Contact: Miya Zheng
Email: sales@amikon.cn
WhatsApp: +86 180 2077 6792
Critical Asset Protection for Industrial Rotating Machinery
The 330103-10-14-10-02-05 probe is mainly used for non-contact displacement sensing on high-speed industrial rotating machinery. In plants running fluid-film bearing machines, operators usually rely on this kind of proximity sensor for continuous condition monitoring because small shaft movement changes can quickly turn into larger mechanical problems if ignored.
- Shaft Vibration Measurement: The probe captures dynamic radial vibration through X and Y orthogonal probe arrangements, helping engineers analyze shaft orbit behavior in real operating conditions. Rotor unbalance, shaft rubs, coupling misalignment, or looseness can normally be identified much earlier from vibration trends.
- Axial Thrust Position Measurement: For axial thrust position measurement, the sensor continuously tracks tiny axial rotor movement. This is especially important on turbines and compressors where excessive thrust movement may eventually damage bearings or create internal contact issues.
- Shaft Eccentricity Monitoring: During startup or slow-roll operation, the probe can also be used for shaft eccentricity monitoring. Thermal runout, shaft bow, and temporary deformation are easier to observe before the machine reaches full operating speed.
Severe-Duty Monitoring in Turbomachinery
Built for demanding industrial environments, this M10 x 1 metric thread probe is commonly installed in heavy-duty turbomachinery applications where temperature, vibration frequency, and contamination levels are relatively high.
- Steam Turbine Monitoring & Gas Turbine Protection: In steam turbine monitoring and gas turbine protection systems, the probe delivers stable real-time displacement data even under continuous high-temperature operation. That’s one reason the 3300 XL 8mm Proximity Probe series is still widely used in power generation projects.
- Centrifugal Compressor Monitor: For centrifugal compressor monitor applications, the sensor provides continuous shaft movement feedback to help operators detect instability, aerodynamic surge conditions, or process disturbances before equipment damage develops further.
Integration with Safety and Plant Instrumentation Systems
Inside modern power plant instrumentation systems, the probe acts as an important signal source for machinery protection and process safety architectures.
- API 670 Compliant System Integration: The sensor is commonly used in API 670 compliant system designs and supports machinery protection requirements found across turbine, compressor, and other critical rotating machinery installations.
- Emergency Shutdown System (ESD) Input: In many emergency shutdown system (ESD) configurations, the probe supplies fast-response vibration and displacement signals to automation systems. When abnormal over-vibration conditions occur, the protection logic can trigger automatic machine shutdown procedures quickly enough to reduce the risk of severe damage.
Machinery Protection System Interfacing
The probe works as a proximity sensor interface within the Bently Nevada monitoring system. Its ClickLoc miniature coaxial connector connects directly to a 330130 Extension Cable, transmitting raw eddy-current signals to a 3300 XL Proximitor Sensor or 330180 Proximitor Sensor for signal conditioning. After processing, the signal is typically sent to a Bently Nevada 3500 rack system, including the 3500/40M Proximitor Monitor and other machinery protection cards. Many users also combine the system with 3500/01 configuration software and TDI module integration for monitoring and diagnostics.
Key Features
- High-Precision Non-Contact Sensing: The 330103-10-14-10-02-05 uses advanced eddy current technology for continuous non-contact displacement sensing on rotating machinery. Since the probe does not physically touch the shaft surface, there’s basically no mechanical wear during operation, which makes it suitable for long-term shaft vibration measurement, axial thrust position measurement, and shaft eccentricity monitoring on critical machines.
- Premium Scale Factor Stability: For users who care about signal consistency, this model maintains a nominal Incremental Scale Factor (ISF) of 7.87 V/mm (200 mV/mil). The output remains highly linear across a 2.0 mm (80 mils) dynamic range, while thermal stability stays reliable even when surrounding operating temperatures fluctuate during normal plant operation.
- Ruggedized Construction without Armor: This version comes in an unarmored configuration and uses a precision-machined M10 x 1 metric thread for industrial installation requirements. The probe housing is built from high-grade AISI 304 stainless steel, while the probe tip uses durable PPS (polyphenylene sulfide) material, so it handles moisture, oil vapor, and chemically aggressive environments much better than standard sensor materials in many field conditions.
- ClickLoc Miniature Coaxial Connector: The integrated ClickLoc miniature coaxial connector helps simplify installation and maintenance work. With its gold-plated brass and beryllium copper construction, the connection stays secure even under constant machine vibration. It connects directly to the 330130 Extension Cable and usually does not require special installation tools during assembly.
- Wide Thermal Operating Range: In turbine and compressor applications, temperature resistance is always important. This probe is designed to keep operating reliably in harsh industrial environments, supporting temperatures from -51 °C to +177 °C (-60 °F to +350 °F) across both the probe tip and the integrated cable section.
- API 670 Standard Compliance: The sensor fully supports API 670 standard requirements for machinery protection systems, including linear range performance, precision accuracy, and mechanical interchangeability. Because of that, it is widely used in critical asset protection projects as well as emergency shutdown system (ESD) environments where stable monitoring signals are essential.
- Seamless Ecosystem Interfacing: As part of the Bently Nevada 3300 XL system family, the probe is optimized to work directly with the 3300 XL Proximitor Sensor and related monitoring hardware. In actual installations, the signal is commonly routed into a Bently Nevada 3500 rack system, including modules like the 3500/40M Proximitor Monitor and various machinery protection cards. Many users also combine the setup with 3500/01 configuration software and TDI module integration for diagnostics, alarm management, and long-term machinery condition monitoring.
Frequently Asked Questions
Q1: What are the exact physical and mechanical dimensions defined by the part number 330103-10-14-10-02-05?
A1: This one is a Bently Nevada 3300 XL 8mm probe, M10 x 1 thread, unarmored cable type. Breakdown is pretty straightforward: “10” means 100 mm case length, “14” is 140 mm overall length, another “10” is 1.0 m cable. “02” is the ClickLoc connector, and “05” basically means it’s the version with hazardous-area approvals.
Q2: Which primary machinery protection measurements can be performed using the 330103-10-14-10-02-05 proximity probe?
A2: It’s mainly for non-contact displacement on rotating machinery. You’ll usually see it used for shaft vibration, axial thrust position, and shaft eccentricity. In real machines, it helps catch things like imbalance, misalignment, rub, shaft bow — basically early mechanical issues before they get serious.
Q3: How does the 330103-10-14-10-02-05 model connect and interface with the wider Bently Nevada 3500 monitoring system?
A3: It connects through a ClickLoc connector to a 330130 extension cable. Then the signal goes into a 3300 XL Proximitor (like 330180), and from there into the 3500 rack system (for example 3500/40M). Some setups also use 3500/01 software and TDI module for configuration and monitoring.
Q4: Does the 330103-10-14-10-02-05 proximity probe comply with critical industry and safety certifications?
A4: Yes, it follows API 670 standards. The “05” version covers common approvals like ATEX, IECEx, CSA, so it’s fine for hazardous areas. Temperature range is roughly -51°C to +177°C, so it’s widely used in turbine and compressor environments.
Q5: What calibration constraints apply to the Incremental Scale Factor (ISF) of the 330103-10-14-10-02-05 transducer system?
A5: ISF is around 7.87 V/mm (200 mV/mil), calibrated on AISI 4140 steel. Linear range is 2.0 mm (80 mils), with 0–10 kHz response. Nothing fancy — just the standard setup for turbine, compressor, and rotating machinery monitoring.
Compatible Parts & Accessories
| Part Numbers | Part Numbers |
|---|---|
| 330180-X0-05 | 330130-080-00-05 |
| 125720-01 | 990-04-70-02-00 |
| 125760-01 | 330104-15-23-10-02-00 |
| 125768-01 | 330104-19-25-10-11-05 |
| 128229-01 | 330103-00-05-10-02-05 |
| 128240-01 | 330103-00-18-05-02-05 |
| 133396-01 | 330130-045-02-05 |
| 146031-01 | 330101-00-08-05-02-05 |
| 330103-00-04-10-02-00 | 330130-085-00-05 |
| 330104-00-06-05-02-00 | 125388-01 |
| 330105-02-12-05-02-00 | 128275-01/128275-01F 130944-01 |
| 330106-05-30-05-02-00 | 330780-91-00 |
| 330106-05-30-10-02-05 | 330103-00-14-10-01-00 |
| 330130-040-00-00 | 330730-080-02-00 |
| 330130-040-01-00 | 330104-05-13-10-02-00 |
| 330180-91-05 | 3500/23E |
| 3500/20 | 3500/15E |
| 3500/45 176449-04 | 136711-01 |
| 3500/60 | 330703-000-040-10-11-00 |
| 3500/64M | 330705-02-18-10-02-00 |
Productos relacionados
Vídeo
Consiga el mejor precio
Vídeo
Vídeo
Consiga el mejor precio
Vídeo
Vídeo
Envíenos su investigación directamente
