AMIKON LIMITED
We'll get back to you as soon as possible.
Place of Origin:
France
Brand Name:
Schneider Electric
Model Number:
BMXNOC0401
A four-port Ethernet communication module for the Modicon M340 automation platform, supporting Modbus TCP and EtherNet/IP communication services.
Network communication for Modicon M340
The Schneider Electric BMXNOC0401 is an Ethernet TCP/IP network module in the Modicon M340 automation platform. It provides an Ethernet interface between an M340 PLC and other Ethernet network devices, with Modbus TCP and EtherNet/IP communication operating simultaneously.
The standard-format module occupies one slot in the M340 rack. Its integrated Ethernet switch, network services and embedded web server support PLC communication, network management and module monitoring.
Model-specific product data
Key product specifications are summarized below. Expand each group for additional details.
Rack integration and network setup
The BMXNOC0401 is a standard-format module installed in one slot of a Modicon M340 rack. The catalog identifies the required processor family as Standard BMXP341000 or Performance BMXP342••••.
The two lower RJ45 connectors support ring topologies using RSTP. The module also provides an embedded four-port switch for Ethernet network connections.
The catalog describes four assignment methods: BootP server, application parameters, default IP address, or the positions of the two rear rotary switches.
Five indicators identify RUN, ERR, MS, NS and ETH STS status. Each RJ45 port also has link and activity indicators for Ethernet connection monitoring.
Front-panel status indications
The module provides local status information through five front-panel LEDs. These indicators help maintenance personnel distinguish processor or system faults from module status, network connection status and Ethernet link activity.
RUN indicates processor running status. ERR indicates a processor or system fault.
MS indicates module status. NS indicates network connection status.
Indicates Ethernet network status. The port-level LNK and ACT LEDs provide link and transmission/reception activity indications.
The embedded web server supports application monitoring and module diagnostics. SNMP and Rack Viewer are also listed communication services.
Communication continuity in automation systems
The BMXNOC0401 is used in Modicon M340 PLC systems where Ethernet communication is required between the controller and network-connected automation devices, including equipment communicating through Modbus TCP or EtherNet/IP.
Typical sourcing situations include loss of Ethernet communication, persistent network or module status alarms, damaged RJ45 interfaces, unstable PLC data exchange, or a suspected network module hardware fault.
If the communication path is interrupted, PLC data exchange with connected devices or supervisory systems may be affected. Depending on the control architecture, this can interrupt monitoring, data acquisition or coordinated machine operation.
Model-specific purchasing guidance
It is an Ethernet TCP/IP network module for the Modicon M340 automation platform, providing Modbus TCP and EtherNet/IP communication services.
It has four RJ45 Ethernet ports supporting 10/100 Mbps communication. The two lower ports support ring topology using RSTP.
The Schneider Electric M340 catalog identifies a Standard BMXP341000 processor or a Performance BMXP342•••• processor for the BMXNOC0401 configuration. Confirm the exact processor and project configuration before installation.
Check the RUN, ERR, MS, NS and ETH STS indicators, the port LNK/ACT LEDs, Ethernet cabling, IP address assignment and the configured network topology. Use the project documentation and module diagnostics to isolate the fault.
Provide the exact part number, quantity, destination, required date and machine/system model. The installed M340 processor reference and network configuration are also useful for checking the replacement requirements.
With 20+ years of industry experience, AMIKON supports industrial maintenance and automation teams with practical spare-parts sourcing and quotation coordination.
Inspection and testing scope is confirmed with the quotation. Electronic modules are packed for protection during storage and international transport. Report any DOA issue promptly with order details and supporting evidence; return authorization is handled under the agreed terms. Warranty is 12 months, subject to quotation terms; coverage and exclusions are confirmed before order.
Please include the following details when requesting a quotation:
Send your inquiry directly to us