Siemens 6ES7332-5HF00-0AB0 SIMATIC S7-300 SM 332 8-Channel Analog Output Module
SIMATIC S7-300 Analog Output Module
SM 332 8-Channel Analog Output
6ES7332-5HF00-0AB0 pdf
Place of Origin:
Germany
Brand Name:
Siemens
SIMATIC S7-300 Analog Output Module
,SM 332 8-Channel Analog Output
,6ES7332-5HF00-0AB0 pdf
Siemens 6ES7332-5HF00-0AB0
The Siemens 6ES7332-5HF00-0AB0 is an isolated analog output module for the SIMATIC S7-300 automation system. It provides eight configurable voltage or current output channels, with parameterizable diagnostics and 11/12-bit resolution.
Module Overview
Eight-channel analog signal output for S7-300 control applications
Output Signal Flexibility
Each output channel can be configured for voltage or current operation. Supported ranges include 0–10 V, ±10 V, 1–5 V, 0–20 mA, ±20 mA and 4–20 mA.
Isolation & Diagnostics
The analog outputs are isolated from the backplane bus and load voltage. The module provides configurable diagnostic functions, readable diagnostic information and a red SF group-error LED.
Technical Specifications
Model-specific technical data for 6ES7332-5HF00-0AB0
| Manufacturer | Siemens |
|---|---|
| Product family | SIMATIC S7-300 |
| Module designation | SM 332 Analog Output |
| Order number | 6ES7332-5HF00-0AB0 |
| Number of outputs | 8 analog outputs |
| Signal type | Voltage / Current (U/I) |
| Resolution | 11/12 bits, depending on output range |
| Rated load voltage L+ | 24 V DC |
| Reverse polarity protection | Yes |
| Required front connector | 40-pin |
| Dimensions (W × H × D) | 40 × 125 × 117 mm |
| Weight | Approx. 272 g |
| Typical power loss | 6 W |
Output Ranges & Load Limits
| Voltage output ranges | 0–10 V; 1–5 V; -10 V to +10 V |
|---|---|
| Current output ranges | 0–20 mA; -20 mA to +20 mA; 4–20 mA |
| Voltage output short-circuit protection | Yes |
| Maximum voltage short-circuit current | 25 mA |
| Maximum current output no-load voltage | 18 V |
| Minimum voltage-output load impedance | 1 kΩ |
| Maximum capacitive load, voltage output | 1 µF |
| Maximum current-output load impedance | 500 Ω |
| Maximum inductive load, current output | 10 mH |
| Maximum shielded cable length | 200 m |
Conversion, Response & Accuracy
| Maximum resolution | 12 bits |
|---|---|
| 0–10 V / 0–20 mA resolution | 12 bits |
| ±10 V / ±20 mA resolution | 11 bits + sign |
| 4–20 mA / 1–5 V resolution | 11 bits + sign |
| Conversion time per channel | 0.8 ms |
| Settling time, resistive load | 0.2 ms |
| Settling time, capacitive load | 3.3 ms |
| Settling time, inductive load | 0.5 ms (1 mH); 3.3 ms (10 mH) |
| Operational error limit, voltage | ±0.5% of output range |
| Operational error limit, current | ±0.6% of output range |
| Basic error limit at 25 °C, voltage | ±0.4% of output range |
| Basic error limit at 25 °C, current | ±0.5% of output range |
Power Consumption & Electrical Isolation
| Maximum current from load voltage L+ (without load) | 340 mA |
|---|---|
| Maximum current from 5 V DC backplane bus | 100 mA |
| Isolation between output channels | No |
| Isolation between outputs and backplane bus | Yes |
| Isolation between outputs and load voltage L+ | Yes |
| Isolation test voltage | 500 V DC |
Diagnostics & Module Handling
| Diagnostic functions | Yes, parameterizable |
|---|---|
| Diagnostic alarm | Yes, parameterizable |
| Diagnostic information | Readable |
| Group error indication | Red SF LED |
| Removing and inserting | Possible with active backplane bus |
Application & Fault Scenarios
Where this module fits and why maintenance teams may look for it
Typical System Role
Used in SIMATIC S7-300 PLC installations that require multiple analog command signals. The module converts PLC output values into voltage or current signals for connected control equipment.
When Replacement May Be Considered
Maintenance teams may search for this module when one or more analog output channels become unavailable, output values are abnormal, or the SF group-error indicator and diagnostic information point to an output-module issue.
Product Lifecycle & Sourcing
Exact order number identification matters when sourcing legacy automation parts
Siemens lists 6ES7332-5HF00-0AB0 under the SM 332 analog output module family and records its product lifecycle status as PM400 – announcement of product phase-out, effective from October 1, 2023. For maintenance of existing S7-300 systems, verify the complete order number and the installed system configuration before selecting a replacement.
For technical reference, customers can request the 6ES7332-5HF00-0AB0 datasheet together with the applicable S7-300 module documentation.
AMIKON Industrial Supply
Practical sourcing support for industrial automation components
Miya Zheng
Frequently Asked Questions
Questions specific to Siemens 6ES7332-5HF00-0AB0
1. What type of module is 6ES7332-5HF00-0AB0?
It is a Siemens SIMATIC S7-300 SM 332 analog output module with eight isolated-from-backplane analog output channels supporting voltage and current signals.
2. Which analog output ranges does this module support?
Voltage ranges are 0–10 V, 1–5 V and -10 V to +10 V. Current ranges are 0–20 mA, -20 mA to +20 mA and 4–20 mA.
3. Does 6ES7332-5HF00-0AB0 provide diagnostic functions?
Yes. It supports parameterizable diagnostic functions and diagnostic alarms, readable diagnostic information and a red SF group-error LED.
4. Which front connector is required?
The specified front connector is a 40-pin connector. Check the existing rack and wiring arrangement before installation or replacement.
5. What should be checked before replacing this module?
Confirm the complete order number, S7-300 system configuration, output signal type, field wiring, connected load and diagnostic status. The selected output range and load limits should match the application requirements.
video
video
video
Send your inquiry directly to us
