SIEMENS 6ES7153-1AA03-0XB0 SIMATIC DP IM 153-1 DP ST ET 200M Interface Module
SIMATIC DP IM 153-1 DP ST
ET 200M Interface Module
6ES7153-1AA03-0XB0 pdf
Place of Origin:
Germany
Brand Name:
Siemens
SIMATIC DP IM 153-1 DP ST
,ET 200M Interface Module
,6ES7153-1AA03-0XB0 pdf
Siemens 6ES7153-1AA03-0XB0
SIMATIC DP · IM 153-1 · ET 200M Interface Module
Product Overview
6ES7153-1AA03-0XB0 is a Siemens SIMATIC DP IM 153-1 interface module for the ET 200M distributed I/O system. It operates as a PROFIBUS DP slave and provides the communication interface between the DP network and an ET 200M station equipped with S7-300 modules.
The module supports a station configuration with up to eight S7-300 modules. It is identified by Siemens as an IM 153-1 DP ST interface module and is listed as a spare part in the product data sheet.
Technical Specifications
| Manufacturer | Siemens |
|---|---|
| Order Number | 6ES7153-1AA03-0XB0 |
| Product Type | IM 153-1 DP ST |
| Product Family | SIMATIC DP / ET 200M |
| Module Function | Interface module / DP slave |
| Supported I/O Modules | Maximum 8 S7-300 modules per DP device interface |
| Rated Supply Voltage | 24 V DC |
| Permissible Supply Range | 20.4–28.8 V DC |
| Maximum Current Consumption | 350 mA at 24 V DC |
| Typical Inrush Current | 2.5 A |
| Inrush Current I²t | 0.1 A²·s |
| Backplane Bus Output | 5 V DC, maximum 1 A |
| Typical Power Loss | 3 W |
| Input Address Space | 128 byte |
| Output Address Space | 128 byte |
| Bus Protocol | PROFIBUS DP to EN 50170 |
| Transmission Interface | RS 485 |
| Maximum Transmission Rate | 12 Mbit/s |
| Bus Connector | 9-pin Sub-D socket |
| Automatic Baud Rate Detection | Supported |
| Permitted PROFIBUS Addresses | 1 to 125 |
| SYNC / FREEZE | Supported |
| Direct Data Exchange | Supported as sender |
| Potential Separation | Yes |
| Isolation Test Voltage | 500 V |
| Protection Rating | IP20 |
| Operating Temperature (Horizontal) | 0 to 60 °C |
| Operating Temperature (Vertical) | 0 to 40 °C |
| Maximum Installation Altitude | 3,000 m above sea level |
| Configuration Software | STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file |
| Dimensions (W × H × D) | 40 × 125 × 117 mm |
| Approximate Weight | 360 g |
Applications & Failure Scenarios
Used in ET 200M stations where S7-300 signal modules exchange process data with a higher-level controller through PROFIBUS DP.
Typical search situations include a DP station that no longer communicates, a station that cannot complete startup, or an interface module suspected of hardware failure.
If the interface module or its network connection fails, the affected ET 200M station may become unavailable to the controller. Remote process signals can then be lost, potentially interrupting machine sequences or process operations.
Configuration & Replacement Notes
The IM 153-1 is configured as a PROFIBUS DP slave within the ET 200M station. Siemens documents STEP 7, COM PROFIBUS and non-Siemens configuration tools using a GSD file as configuration options.
| GSD Identification | SIEM801D.GSD; SI01801D.GSG |
|---|---|
| GSD Reference | Siemens product data lists the above GSD identifiers for the PROFIBUS DP device. |
| Replacement Checks | Confirm the complete order number, station configuration, PROFIBUS address, bus connector and existing configuration data before replacement. |
Installation & Operating Conditions
The specified ambient temperature depends on mounting orientation. Allow for the applicable installation clearances and follow the ET 200M operating instructions for mounting, power wiring, PROFIBUS connection and commissioning. Installation and service should be performed by qualified personnel with the equipment safely isolated as required by the system procedure.
FAQ
AMIKON Industrial Supply INDUSTRIAL PARTS SOURCING, KEPT PRACTICAL
Support for Your Automation Parts Requirements
Contact: Miya Zheng
Request a Quote
Please include the following information in your inquiry for efficient order review.
Part Number: 6ES7153-1AA03-0XB0
Quantity: Required quantity
Destination: Delivery country / city
Required Date: Requested delivery date
Machine/System Model: Installed machine or control system model
video
video
video
Send your inquiry directly to us
