SIEMENS 6SL3224-0BE15-5UA0 SINAMICS G120 PM240 Power Module
SINAMICS G120 PM240 Power Module
0.55 kW Rated Power
6SL3224-0BE15-5UA0 datasheet
Place of Origin:
Germany
Brand Name:
Siemens
SINAMICS G120 PM240 Power Module
,0.55 kW Rated Power
,6SL3224-0BE15-5UA0 datasheet
SIEMENS 6SL3224-0BE15-5UA0
Unfiltered Power Module · Integrated Braking Chopper · 380–480 V Three-Phase
01Product Overview
The Siemens 6SL3224-0BE15-5UA0 is a PM240 power module for the SINAMICS G120 drive system. It serves as the power-conversion section between the incoming three-phase AC supply and the motor-side output. Its documented configuration combines an unfiltered design with an integrated braking chopper.
For technical review and procurement records, request the Siemens 6SL3224-0BE15-5UA0 datasheet PDF with the exact order number.
02Application & Failure Scenarios
This power module is used as the power stage in a SINAMICS G120 variable-speed drive installation. Maintenance teams may search for this exact part when the installed PM240 has a power-stage fault, shows physical damage, or can no longer support the connected motor operation. A failed power module can prevent the drive from supplying the motor, stopping the associated conveyor, pump, fan or other machine function. Before sourcing, compare the complete order number, electrical ratings, frame size and existing system configuration.
03Technical Specifications
The key electrical and mechanical identifiers are shown below. Expand the additional specification groups for connection, environmental and standards information.
◆Product & Input Ratings
- ManufacturerSiemens
- Order Number6SL3224-0BE15-5UA0
- Product FamilySINAMICS G120
- Power Module TypePM240
- Filter ConfigurationUnfiltered
- Braking ChopperIntegrated
- Control Unit / BOPNot included
- Input Phase3 AC
- Line Voltage380–480 V ±10%
- Line Frequency47–63 Hz
- Rated Input Current with Line Reactor1.80 A
- Rated Input Current without Line Reactor2.10 A
Expand Output, Connection, Mechanical & Environmental Data
01Output & Overload Ratings
- Output Phase3 AC
- Rated Output Voltage400 V IEC / 480 V NEC
- Rated Power — Low Overload (LO)0.55 kW
- Rated Power — High Overload (HO)0.55 kW
- Rated Output Current — LO1.70 A
- Rated Output Current — HO1.70 A
- Maximum Output Current3.40 A
- Pulse Frequency4 kHz
- Output Frequency — Vector Control0–200 Hz
- Output Frequency — V/f Control0–550 Hz
- LO Overload Capacity110% for 57 s and 150% for 3 s, each within a 300 s cycle
- HO Overload Capacity150% for 57 s and 200% for 3 s, each within a 300 s cycle
02Electrical Connections & Cable Data
- Line-Side ConnectionScrew-type terminal
- Motor-Side ConnectionScrew-type terminals
- DC-Link Connection for Braking ResistorScrew-type terminals
- Conductor Cross-Section — Line Side1.00–2.50 mm² (AWG 18–14)
- Conductor Cross-Section — Motor Side1.00–2.50 mm² (AWG 18–14)
- Conductor Cross-Section — DC Link1.00–2.50 mm² (AWG 18–14)
- PE ConnectionOn housing with M4 screw
- Maximum Shielded Motor Cable Length50 m
- Maximum Unshielded Motor Cable Length100 m
03General Technical Data
- Power Factor λ0.85
- Offset Factor cos φ0.95
- Efficiency η0.97
- Sound Pressure Level at 1 m45 dB
- Power Loss0.10 kW
- CoolingInternal air cooling
- Cooling Air Requirement0.005 m³/s
- Installation Altitude1,000 m
- Degree of ProtectionIP20 / UL open type
- Frame SizeFSA
- Net Weight1.10 kg
- Dimensions (W × H × D)73 × 173 × 145 mm
04Environmental Conditions & Standards
- Ambient Temperature — LO Operation0 to +40 °C
- Ambient Temperature — HO Operation0 to +50 °C
- Transport Temperature-25 to +55 °C
- Storage Temperature-25 to +55 °C
- Maximum Operating Relative Humidity95% RH, condensation not permitted
- Standards ComplianceUL, cUL, CE, C-Tick (RCM), SEMI F47
- CE MarkingLow-voltage directive 2006/95/EC
The Siemens data sheet notes that the output current and HP ratings shown for 480 V NEC are valid for the 440–480 V range. Technical data may change, and calculated values may differ from rating-plate values.
04Installation & Replacement Notes
The PM240 uses internal air cooling. Allow the specified cooling airflow and observe the installation conditions, enclosure protection and ambient-temperature limits stated for the module. The published connection data identifies screw-type terminals for the line, motor and braking-resistor DC-link connections, with the PE connection made to the housing using an M4 screw.
Before replacement, verify the incoming supply, motor rating, current requirements, braking-resistor arrangement, motor-cable length and the installed Control Unit configuration against the machine documentation. The power module is supplied without a Control Unit and BOP; do not treat it as a complete standalone drive.
05Frequently Asked Questions
1. What supply voltage is required for 6SL3224-0BE15-5UA0?
The specified input is three-phase AC, 380–480 V ±10%, at a line frequency of 47–63 Hz.
2. What are the rated power and output current?
The Siemens data sheet specifies 0.55 kW for both Low Overload and High Overload operation, with a rated output current of 1.70 A for each rating.
3. Is a separate Control Unit required for this PM240 power module?
The specified power module is supplied without a Control Unit and BOP. The installed SINAMICS G120 arrangement must therefore be checked when planning a replacement.
4. Can an external braking resistor be connected?
The module has an integrated braking chopper. Its published connection information identifies screw-type terminals for the braking-resistor DC-link connection.
5. Which details should be checked before ordering a replacement?
Verify the complete order number, supply voltage, motor power and current requirements, frame size, braking arrangement, cable installation and the existing SINAMICS G120 system configuration.
06Contact & Industrial Supply
AMIKON Industrial Supply
Industrial Parts Sourcing, Kept Practical. AMIKON supports industrial automation spare-parts procurement with model identification, sourcing coordination and order assistance. We help maintenance and purchasing teams clarify part-number requirements and arrange practical supply solutions for industrial equipment.
INDUSTRIAL SUPPLY PARTS SUPPORT ORDER ASSISTANCE- Contact Person Miya Zheng
- Email sales@amikon.cn
- WhatsApp +86 180 2077 6792
Delivery & Warranty: Testing arrangements, protective packaging, DOA reporting and return handling are confirmed with the quotation. Warranty: 12 months, subject to agreed quotation terms and applicable warranty conditions.
video
video
video
Send your inquiry directly to us
