বাড়ি
>
পণ্য
>
এবি পি এল সি
>
ABB NETA-01 Ethernet Adapter Module with 100Mbps Data Transfer Rate for Remote Monitoring
ABB NETA-01 Ethernet Adapter Module with 100Mbps Data Transfer Rate for Remote Monitoring
100Mbps Data Transfer Rate Ethernet Adapter Module
24V DC Power Supply Network Adapter Module
Remote Monitoring ABB PLC Module
উৎপত্তি স্থল:
সুইডেন
পরিচিতিমুলক নাম:
ABB
মডেল নম্বার:
NETA-01
আমাদের সাথে যোগাযোগ
একটি উদ্ধৃতি অনুরোধ করুন
পণ্যের বিবরণ
পাওয়ার সাপ্লাই:
24 ভি ডিসি
বর্তমান খরচ:
24 V DC ±10% এ 80 mA
আনুমানিক শিপিং আকার:
7.65x3.5 x9.3cm
ওজন:
0.38 কেজি
ডাটা ট্রান্সফার রেট:
100Mbps পর্যন্ত
অপারেটিং তাপমাত্রা:
-25 ° C থেকে +70 ° C
স্টোরেজ তাপমাত্রা:
-40°C থেকে +85°C
আপেক্ষিক আর্দ্রতা:
5-95% (অ ঘনীভূত)
বিশেষভাবে তুলে ধরা:
100Mbps Data Transfer Rate Ethernet Adapter Module
,24V DC Power Supply Network Adapter Module
,Remote Monitoring ABB PLC Module
পেমেন্ট ও শিপিংয়ের শর্তাবলী
ন্যূনতম চাহিদার পরিমাণ
1
মূল্য
66USD
প্যাকেজিং বিবরণ
একেবারে নতুন এবং আসল
ডেলিভারি সময়
2-3 কাজের দিন
পরিশোধের শর্ত
টি/টি
যোগানের ক্ষমতা
স্টকে
সম্পর্কিত পণ্য
ভিডিও
ABB NETA-01 Ethernet Adapter Module with 100Mbps Data Transfer Rate for Remote Monitoring
সেরা দাম পান
ভিডিও
ABB DI650 3BHT300025R1 32-Channel Digital Input Module with 24 VDC and Reverse Polarity Protection
সেরা দাম পান
আমাদের সাথে যোগাযোগ
এখনই যোগাযোগ করুন
পণ্যের বর্ণনা
The ABB NETA-01 Ethernet Adapter Module is an optional device designed for browser-based remote monitoring of ABB drives via Ethernet. It enables network connectivity for multiple drives, allowing up to nine units to be connected through a DDCS Branching Unit (NDBU-85/95) or configured in a ring topology.
Through the use of the NETA-01 Ethernet Adapter Module, it is possible to monitor the drive by reading and adjusting drive parameter values, reading status information and actual values, and setting up and monitoring the data logger either numerically or graphically. Logged data can be saved to a file, fault log contents can be read and cleared, and e-mail messages (maximum nine) can be sent on events. The module also supports continuous monitoring via e-mail and data acquisition from the drive and process using a Modbus TCP server.
In addition to monitoring functions, the NETA-01 Ethernet Adapter Module allows control of the drive. Control commands such as Start, Stop, and Run Enable can be issued, motor speed or torque references can be fed to the drive, and drive faults can be reset. The adapter module is mounted on a standard mounting rail either inside or outside the drive unit, depending on the drive type and configuration.
| Drive Category | Supported Series | Functional Caveats |
|---|---|---|
| LV AC (Low Voltage) | ACS800, ACS 600, ACX 400 | Full Applet / Telemetry Support |
| LV DC (Direct Current) | DCS 800, DCS 600 | Excludes "Motor Control" Applet |
| MV AC (Medium Voltage) | ACS 6000, ACS 1000, ACS 5000 | Remote Diagnostics & Monitoring |
- Ethernet Connection: Connect the network cable to the RJ45 connector on the NETA-01 module. The connector is internally terminated. Add a ferrite core to the PC end to reduce EMC disturbances from power cables.
- Power Supply Connection: Connect a 24 V DC power supply to the connector on the lower side of the module. Power can come from the drive's internal supply or a separate external supply.
- Drive Connection: Connect the module to the drive using a fibre optic cable. Check drive documentation for the correct terminals. Multiple drives can be connected via the NDBU-85/95 DDCS Branching Unit or in ring topology. Configure drives via the module's web interface.
- ACS800 Channels: Connect channels CH0 and CH3. CH0 is for fieldbus control and monitoring. CH3 is for monitoring and debugging.
At Amikon, we don't just ship boxes; we provide the "rescue kit" for your automation systems. We've cut the red tape to get these brands to your door before the panic sets in.
The "In-Stock" Lineup:
DCS Experts: ABB | Foxboro | Triconex | Honeywell | Emerson | HIMA
PLC Heavy Hitters: Siemens | Schneider Modicon | GE Fanuc | Prosoft
TSI Criticals: Bently Nevada | EPRO | ENTEK
PLC Heavy Hitters: Siemens | Schneider Modicon | GE Fanuc | Prosoft
TSI Criticals: Bently Nevada | EPRO | ENTEK
Why skip the factory wait? Because we've already done the sourcing for you. High quality, fair pricing, and zero delays.
Got a crisis or just planning ahead? Ping me. I'm faster than a standard inquiry form.
সম্পর্কিত পণ্য
আপনার জিজ্ঞাসা সরাসরি আমাদের কাছে পাঠান
