บ้าน
>
ผลิตภัณฑ์
>
เนวาดาอย่างอ่อนโยน
>
Bently Nevada 136188-01 Ethernet/RS232 Modbus I/O Module with Dual Protocol Support Hot-Swappable Design and 256 Modbus Registers
Bently Nevada 136188-01 Ethernet/RS232 Modbus I/O Module with Dual Protocol Support Hot-Swappable Design and 256 Modbus Registers
3500/92 Modbus I/O Module Bently Nevada 3500 rack
Modbus TCP/IP communication DCS/PLC communication
process control system integration Ethernet gateway interface
สถานที่กำเนิด:
สหรัฐอเมริกา
ชื่อแบรนด์:
Bently Nevada
หมายเลขรุ่น:
136188-01
ติดต่อเรา
ขอคําอ้างอิง
รายละเอียดสินค้า
แบบอย่าง:
136188-01
ประเทศต้นกำเนิด:
สหรัฐอเมริกา
สถานที่จัดส่ง:
เซียะเหมินประเทศจีน
การส่งสินค้า:
ทีเอ็นที, DHL, FedEx, EMS, อัพ
ขั้นต่ำ:
1 ชิ้น
บรรจุภัณฑ์:
บรรจุภัณฑ์ใหม่ต้นฉบับ
ขนาดการจัดส่งโดยประมาณ:
2.4x11x24ซม
น้ำหนัก:
0.38 กก
เน้น:
3500/92 Modbus I/O Module Bently Nevada 3500 rack
,Modbus TCP/IP communication DCS/PLC communication
,process control system integration Ethernet gateway interface
เงื่อนไขการชําระเงินและการจัดส่ง
จำนวนสั่งซื้อขั้นต่ำ
1
ราคา
66USD
รายละเอียดการบรรจุ
แบรนด์ใหม่และเป็นต้นฉบับ
เวลาการส่งมอบ
2-3 วันทำการ
เงื่อนไขการชำระเงิน
ที/ที
สามารถในการผลิต
ในสต็อก
สินค้าที่เกี่ยวข้อง
วิดีโอ
Bently Nevada 3500/94M VGA Display Module for Real-time Machinery Data Visualization with Customizable GUI and API 670 Compliance
หา ราคา ที่ ดี ที่สุด
วิดีโอ
Bently Nevada 136188-01 Ethernet/RS232 Modbus I/O Module with Dual Protocol Support Hot-Swappable Design and 256 Modbus Registers
หา ราคา ที่ ดี ที่สุด
ติดต่อเรา
ติดต่อตอนนี้
คําอธิบายสินค้า
Bently Nevada 136188-01 Ethernet/RS232 Modbus I/O Module
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 136188-01 |
| Description | Ethernet/RS232 Modbus I/O Module |
| Associated Monitor | 3500/92 Communication Gateway |
| Primary Protocols | Modbus TCP/IP (Ethernet) & Modbus RTU (Serial) |
| Physical Interface | 1x RJ45 (Ethernet), 1x RS232 Serial Port |
| Modbus Function Codes | 01, 02, 03, 04, 05, 06, 15, 16 |
| Max Modbus Registers | Up to 256 per configuration |
| Operating Temperature | -30°C to +65°C (-22°F to +149°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 95%, non-condensing |
| Mounting | Rear slot of 3500 Monitoring System rack |
For inquiries, please contact:
Contact: Miya Zheng
Email: sales@amikon.cn
WhatsApp: +86 180 2077 6792
Key Applications
- DCS & PLC System Integration
.In most real setups, the Bently Nevada 136188-01 is basically used as a communication bridge between the 3500 rack and higher-level control systems. You’ll see it sitting in process control system integration environments where DCS or PLC needs direct access to machinery protection data. Modbus TCP/IP is usually the main path, and RS232 is still there for older setups that haven’t been fully upgraded. - Plant-Wide SCADA Connectivity
For plant-wide SCADA system integration, this module often acts like a small communication gateway rather than a “protection” device. It takes condition monitoring data from the Bently Nevada 3500 rack and pushes it upstream so operators can actually see vibration, position, and status values on a central screen. In power plant communication networks, this is pretty common, especially when everything needs to be visualized in one place. - Remote Condition Monitoring
Remote monitoring is another big use case. Once it’s in place, static and dynamic data can be streamed out to asset management platforms. Engineering teams don’t need to stand next to the rack all the time — they can just log in and check machine behavior remotely. For oil and gas automation or heavy industrial connectivity, that’s usually how condition monitoring data transfer is handled these days. - Critical Asset Protection in Energy & Power
In critical asset protection scenarios, especially in turbines and compressors, the module helps move data from local protection systems into broader plant systems. Steam turbines, gas turbines, centrifugal compressors — all those typical rotating machines in energy and power setups — tend to rely on this kind of integration to keep everything visible at the control room level. - API 670 Compliant Networking
From a standards point of view, it fits into API 670 compliant architectures as a communication layer. It doesn’t handle protection logic itself, but it ensures alarm and status signals can reach emergency shutdown systems (ESD) or other supervisory systems without delay or data mismatch. - Real-Time Data Management
On the data side, it can handle fairly dense Modbus communication, usually up to around 256 registers depending on configuration. That’s enough for real-time tracking of things like shaft eccentricity, thrust position, and radial vibration. In heavy industrial environments, that continuous data flow is what makes the system useful for long-term monitoring and diagnostics.
Technical Features
- Dual Protocol Support (Ethernet & Serial)
The Bently Nevada 136188-01 is basically built as a communication bridge, and in real installations you’ll usually see it handling both Ethernet TCP/IP and RS232 at the same time. That dual protocol setup is actually quite practical — Ethernet for modern DCS/PLC systems, and serial link still there for older equipment that hasn’t been upgraded yet. - Advanced Modbus Gateway Capability
On the Modbus side, it works as a 3500/92 Communication Gateway, so external systems can reach into the Bently Nevada 3500 rack and pull out whatever they need — status bits, event lists, or condition monitoring data. In most process control system integration projects, this is the piece that makes data flow outside the rack. - High-Density Data Transmission
Data handling is fairly dense too. It can support up to around 256 Modbus registers per configuration. That’s usually enough for typical machinery protection networking tasks, especially when you’re dealing with vibration, position, and alarm-related signals across multiple assets. - Hot-Swappable Module Design
One thing people like in practice is the hot-swappable design. The module can be replaced while the rack is still running. So in a power plant communication or oil and gas automation setup, you don’t have to shut down the whole system just to swap a card. That’s a big deal when uptime matters. - Standardized Function Code Compatibility
It also follows standard Modbus function codes — 01, 02, 03, 04, 05, 06, 15, and 16. Nothing exotic here, but it means it works with almost any Modbus master device without extra conversion layers. In SCADA system integration projects, this kind of compatibility usually saves a lot of time during commissioning. - Industrial-Grade Reliability
From a reliability point of view, it’s designed for harsh environments, typically -30°C to +65°C operating range. So whether it’s installed in a control room or closer to field equipment in industrial connectivity setups, it generally holds up without issues. - Full Integration with 3500 Ecosystem
Configuration is handled through the 3500 Rack Configuration Software, where engineers map Modbus registers and set communication parameters. It’s not overly complicated, but in real projects people usually adjust it based on how the DCS or PLC is structured.
Frequently Asked Questions
Q1: What is the main purpose of the 136188-01 module?
A: The Bently Nevada 136188-01 is basically used to move data out of the Bently Nevada 3500 rack. In most setups it sits in the 3500/92 Communication Gateway role and lets external DCS or PLC systems read machine data in real time. So it’s more about communication than protection itself.
Q2: What communication ports does the 136188-01 have?
A: Two main ones — Ethernet (RJ45, TCP/IP) and RS232 serial. Ethernet is usually for modern plant networks, while RS232 is still there for older SCADA or control systems. Nothing fancy, just practical dual support.
Q3: Difference between 136188-01 and 136188-02?
A: It mainly comes down to serial type. The 136188-01 uses RS232, while the 136188-02 is RS485/RS422. In real projects, people usually just pick based on what the existing system already has.
Q4: Can the 136188-01 be replaced while running?
A: Yes, it’s hot-swappable. So you can pull it out and replace it without shutting down the whole rack. In places like power plant communication or oil and gas automation, this is actually quite useful because nobody wants downtime just for a module swap.
Q5: How much data can the 136188-01 handle?
A: Around 256 Modbus registers per setup. That’s usually enough for condition monitoring data transfer like vibration, shaft position, alarms, and status bits going to a DCS or SCADA system.
Q6: How do you configure the 136188-01?
A: Through the 3500 Rack Configuration Software. You basically set the Modbus register map and communication parameters there. In real use, engineers often adjust it a bit during commissioning depending on how the plant network is arranged.
Related Part Numbers
| 330730-040-03-00 | 128031-01C 128031-01 |
| 330104-00-25-10-02-05 | 330904-05-14-05-02-00 |
| 330103-00-07-20-02-00 | 330930-040-00-00 |
| 126599-01 | 330909-00-60-10-02-05 |
| 990-04-70-01-00 | 21000-16-10-15-057-03-02 |
| 330103-00-15-05-01-00 | 21000-16-10-15-102-03-02 |
| 330905-00-10-10-02-00 | 21000-16-10-15-114-03-02 |
| 991-06-50-01-00 | 21000-16-10-15-144-03-02 |
| 330103-00-15-10-02-00 | 991-01-XX-01-CN |
| 1X35668 | 3500/93 135799-02 |
| 330103-02-07-10-02-00 | 22810-00-10-10-02 |
| 330103-02-12-10-02-00 | 330193-00-05-10-00 |
| 330103-05-13-10-02-00 | 330103-02-12-05-02-CN |
| 330103-07-12-10-02-00 | 330103-06-13-05-02-CN |
| 330104-01-05-10-02-00 | 330104-00-04-10-02-CN |
| 330703-050-120-10-02-00 | 990-05-XX-01-CN |
| 330709-050-120-10-02-00 | 330101-30-63-15-02-CN |
| 76686-040-01 | 330104-00-04-50-11-00 |
| 81305-040-00 | 330104-00-12-10-02-00 |
| 135489-04 | 330104-00-15-10-02-00 |
สินค้าที่เกี่ยวข้อง
วิดีโอ
หา ราคา ที่ ดี ที่สุด
วิดีโอ
วิดีโอ
หา ราคา ที่ ดี ที่สุด
วิดีโอ
วิดีโอ
ส่งข้อสอบของคุณตรงมาหาเรา
