Дом
>
продукты
>
БЕНТЛИ НЕВАДА
>
Bently Nevada 330103-00-06-05-02-00 Proximity Probe with M10 × 1 Metric Thread and 0.5-Meter Coaxial Cable for Wide Temperature Range
Bently Nevada 330103-00-06-05-02-00 Proximity Probe with M10 × 1 Metric Thread and 0.5-Meter Coaxial Cable for Wide Temperature Range
330103-00-06-05-02-00 Probe axial position monitoring
3300 XL 8mm Proximity Probe 3300 XL Proximitor Sensor
radial vibration measurement industrial rotating machinery
Место происхождения:
США
Фирменное наименование:
Bently Nevada
Номер модели:
330103-00-06-05-02-00
Свяжитесь мы
Спросите цитату
Детали продукта
Модель:
330103-00-06-05-02-00
Страна происхождения:
США
Место отгрузки:
Сямэнь, Китай
Перевозки:
ТНТ, ДХЛ, Федерал Экспресс, ЭМС, УПС
минимальный заказ:
1 шт.
Упаковка:
Оригинальная новая упаковка
Выделить:
330103-00-06-05-02-00 Probe axial position monitoring
,3300 XL 8mm Proximity Probe 3300 XL Proximitor Sensor
,radial vibration measurement industrial rotating machinery
Условия оплаты & доставки
Количество мин заказа
1
Цена
66USD
Упаковывая детали
Совершенно новый и оригинальный
Время доставки
2-3 рабочих дня
Условия оплаты
Т/Т
Поставка способности
В наличии
СОБЩЕННЫЕ ПРОДУКТЫ
Видео
Bently Nevada 330103-00-06-05-02-00 Proximity Probe with M10 × 1 Metric Thread and 0.5-Meter Coaxial Cable for Wide Temperature Range
Получите самую лучшую цену
Видео
Bently Nevada 9200-06-05-05-00 Two-Wire Velocity Seismoprobe Transducer with Self-Generating Technology and 10 Hz Minimum Operating Frequency in Stainless Steel Housing
Получите самую лучшую цену
Видео
Bently Nevada 991-01-XX-02-05 991 Thrust Transmitter with 4-20 mA Loop Output ATEX Zone 0/2 Certified and 3300 NSv Probe Interface
Получите самую лучшую цену
Свяжитесь мы
Контакт теперь
Характер продукции
Bently Nevada 330103-00-06-05-02-00 3300 XL 8 mm Proximity Probe
Product Overview
| Category | Specification Item | Technical Data |
|---|---|---|
| Physical Configuration | Base Model | 3300 XL 8 mm Proximity Probe |
| Thread Type | M10 × 1 thread (Unarmored) | |
| Unthreaded Length(00) | 0 mm (Fully threaded) | |
| Overall Case Length(06) | 60 mm | |
| Total Cable Length(05) | 0.5 meter (1.6 feet) | |
| Connector Type(02) | Miniature coaxial ClickLoc connector | |
| Agency Approval(00) | Not required (00) | |
| Measurement & Electrical | Operating Principle | Non-contact Eddy Current |
| Linear Range | 2.0 mm (80 mils) | |
| Scale Factor (Sensitivity) | 7.87 V/mm (200 mV/mil) | |
| Environmental & Material | Operating Temperature | -52 °C to +177 °C (-62 °F to +350 °F) |
| Probe Tip Material | Polyphenylene Sulfide (PPS) | |
| Probe Case Material | AISI 303 or 304 Stainless Steel | |
| Cable Type | 75 Ω coaxial cable (Fluoropolymer-insulated) |
Key Benefits
- Minimize Downtime: Fast global shipping to get your operations back online instantly.
- Hard-to-Find Parts: Direct access to obsolete, rare, and discontinued automation components.
- Trusted Quality: 100% original, fully tested parts with an extended warranty.
Customer Testimonials
In one robotics cell project, they basically handled the full package—sensors, drives, PLCs all supplied together. What really helped on site was the integration suggestions; commissioning ended up finishing nearly a week earlier than planned.
During an urgent maintenance case, they managed to ship replacement PLCs, HMIs, and sensors on the same day. Not just delivery either—they also walked the team through installation, so the line was back up without losing production time.
A multi-plant upgrade was smooth thanks to Amikon coordinating shipments so each line got the correct components exactly when needed.
On a bottling line project with tight deadlines, Amikon delivered all controllers and servo motors ahead of schedule and helped optimize HMI layouts for our operators.
For a process expansion, Amikon sourced hard-to-find sensors compatible with our DCS system, allowing integration without modifications or downtime.
Product Features
- High-Precision Eddy Current Transducer System
This one is built around eddy current technology, non-contact type, mainly for radial vibration measurement and axial thrust position monitoring on rotating machinery. In real plant environments like steam turbine vibration monitoring or centrifugal compressor protection, it’s the kind of probe engineers usually go for when accuracy matters. - M10 × 1 Metric Thread & Unarmored Design
It comes with an M10 × 1 metric thread body, case length around 60 mm, unarmored structure. Installation is pretty straightforward, nothing special needed, fits well into standard machine housings or compact mounting points where space is a bit tight. - 0.5-Meter Premium Coaxial Cable
Cable length is 0.5 m, using 75 Ω coaxial cable with fluoropolymer insulation. In practice, it handles routing inside crowded instrumentation layouts quite well, and also holds up against oil, moisture, and general plant conditions without much issue. - Secure ClickLoc Coaxial Connector
Uses the ClickLoc connector, the small coaxial type that locks in place. This helps avoid accidental loosening, especially when paired with 330180 extension cable in high-vibration setups. Contact surface is gold-plated, so long-term stability is usually not a concern. - Wide Operating Temperature Range
This one is rated from -52 °C up to +177 °C, so it’s clearly not just for “normal plant room” conditions. In practice, you’ll still see it running in pretty harsh spots—think steam turbine vibration monitoring, hot sections of turbomachinery, or those areas where temperature swings are constant and not very friendly to electronics. - Full API 670 Standard Compliance
Complies with API 670 standard, with a linear range of 2.0 mm (80 mils) and scale factor of 7.87 V/mm (200 mV/mil). This is basically what you expect in critical machinery protection systems inside power plants or similar setups. - Seamless 3500 System Integration
Works directly with Bently Nevada 3300 XL Proximitor Sensor and 3500/40M Proximitor Monitor. Usually it’s deployed inside a full Bently Nevada 3500 system, building up a complete protection loop for emergency shutdown system (ESD) or critical rotating asset monitoring.
Frequently Asked Questions
Q1: What exactly is the 330103-00-06-05-02-00 in terms of specs?
A: This 330103-00-06-05-02-00 is part of the 3300 XL 8mm eddy current probe series. Nothing too complicated in structure—M10 × 1 metric thread, fully threaded body (0 mm unthreaded section), and overall length around 60 mm. Cable is 0.5 m, unarmored type, with the small ClickLoc coax connector. In real installations, this kind of compact setup is usually picked when mounting space is limited but signal stability still matters.
Q2: Where is the 330103-00-06-05-02-00 usually used?
A: It’s mainly used for non-contact monitoring on rotating machinery, things like radial vibration measurement, axial thrust position, shaft eccentricity, that kind of measurement. In real applications, it’s usually sitting on steam turbines, gas turbines, centrifugal compressors. Basically heavy industrial rotating machinery in power plants or process plants. Anywhere condition monitoring is critical and downtime gets expensive fast, you’ll tend to see this type of probe used.
Q3: Does the 330103-00-06-05-02-00 meet API 670 or not?
A: Yes, it’s compliant with API 670 for machinery protection systems. When used as part of a full 3300 XL loop, the probe gives 2.0 mm (80 mils) linear range and 7.87 V/mm (200 mV/mil) scale factor. This is pretty standard for protection systems used in ESD or turbine safety monitoring.
Q4: What do I need to complete the system with the 330103-00-06-05-02-00?
A: You’ll need a Bently Nevada 330180 extension cable and a 3300 XL Proximitor Sensor. Since this probe already comes with a 0.5 m integral cable, most setups go with 4.5 m or 8.5 m extension cable, so the total system becomes 5 m or 9 m. Then it connects into a 3500/40M Proximitor Monitor card. This is basically the standard 3500 system configuration you see in many plants.
Q5: Can the 330103-00-06-05-02-00 handle harsh environments? What about materials?
A: Temperature range is quite wide, from -52 °C to +177 °C, so it’s not just for normal plant conditions. Material side: PPS tip, stainless steel housing (AISI 303/304), and 75 Ω fluoropolymer coax cable. In real use, this combination holds up well in hot, oily, vibrating turbine environments without much issue.
Related Parts
СОБЩЕННЫЕ ПРОДУКТЫ
Видео
Получите самую лучшую цену
Видео
Получите самую лучшую цену
Видео
Получите самую лучшую цену
Видео
Получите самую лучшую цену
Отправьте ваше дознание сразу в нас
