Casa
>
produtos
>
CURVADA NEVADA
>
Bently Nevada 330104-00-11-10-01-00 8 mm Proximity Probe with Stainless Steel Armor and API 670 Compliance
Bently Nevada 330104-00-11-10-01-00 8 mm Proximity Probe with Stainless Steel Armor and API 670 Compliance
Armored Reliability Interchangeable Design
API 670 Compliant Thermal Resilience
Industrial Precision
Lugar de origem:
EUA
Marca:
Bently Nevada
Número do modelo:
330104-00-11-10-01-00
Contacte-nos
Peça umas citações
Detalhes do produto
Modelo:
330104-00-11-10-01-00
Tamanho estimado de envio:
1,8x1,6x121cm
País de origem:
EUA
Local de envio:
Xiamen,China
peso:
0,15KG
Envio:
TNT, DHL, FedEx, EMS, UPS
Quantidade mínima:
1 peça
Embalagem:
Nova embalagem original
Destacar:
Armored Reliability Interchangeable Design
,API 670 Compliant Thermal Resilience
,Industrial Precision
Termos do pagamento & do transporte
Quantidade de ordem mínima
1
Preço
66USD
Detalhes da embalagem
Novo e original
Tempo de entrega
2-3 dias úteis
Termos de pagamento
T/T
Habilidade da fonte
em estoque
PRODUTOS CONEXOS
Contacte-nos
Contato agora
Descrição do produto
Bently Nevada 330104-00-11-10-01-00 3300 XL 8 mm Proximity Probe
- Part Number Configuration: 330104-00-11-10-01-00 (3300 XL 8 mm Proximity Probe, M10 x 1 thread, with armor)
- Unthreaded Length: 0 mm (fully threaded case)
- Overall Case Length: 110 mm
- Total Cable Length: 1.0 metre (3.3 feet)
- Connector Type: Miniature coaxial ClickLoc connector with connector protector
- Cable Type: Standard cable with stainless steel integral armor
- Agency Approvals: None required (Standard version)
- Linear Range: 2.0 mm (80 mils), starting at approximately 0.25 mm (10 mils) from the probe tip
- Scale Factor: 7.87 V/mm (200 mV/mil) when used with a compatible 3300 XL Proximitor Sensor
- Accuracy/Linearity: Less than ±0.06 mm (±2.4 mils) error over the 2.0 mm linear range at 0°C to +45°C
- Probe Tip Material: Polyphenylene sulfide (PPS)
- Probe Case Material: AISI 303 or 304 Stainless Steel (SST)
- Operating Temperature: -35°C to +177°C (-31°F to +351°F)
- Pressure Rating: Specifically designed to seal against 5.2 bar (75 psi) differential pressure between the probe tip and case
- Compliance: Fully compliant with API 670 standards for vibration, position, and speed measurements
- Ingress Protection: Rated IP68 for environmental sealing
|
Voices You Can Trust |
From urgent breakdowns to complex upgrades, customers trust Amikon to deliver when it matters most. On a tight packaging line, we provided preconfigured HMIs in record time—while double-checking every specification to ensure seamless installation.
When a robotic arm sensor wasn’t available locally, we sourced it internationally and delivered it in about two days, helping avoid a production delay. During a factory upgrade, we supplied PLC and DCS modules and also supported the team with basic layout suggestions, which helped make commissioning smoother and reduced setup mistakes. When a servo drive failed mid-assembly, our overnight logistics and support got production back online within hours. And when a critical PLC went down during operation, we had a replacement on-site the next morning—keeping the line running without interruption.
Contact Miya Zheng today for fast quotes, availability, and expert support. Email: sales@amikon.cn
WhatsApp: +86 180 2077 6792
This probe’s built for fluid-film bearing machines — think gas/steam turbines, big centrifugal compressors and large pumps. In short: it helps keep that oil-film gap right, watches shaft position and radial vibration, and tracks thermal growth — all while meeting API 670 expectations.
Key Features
- Stainless-steel armor around the coax — tough against abrasion, pinching, and rough plant conditions.
- Non-contact eddy-current sensing — no contact with the shaft, so no probe wear; long life, less fuss.
- High-temp parts: PPS probe tip and FEP-insulated cable run reliably up to about 177°C (350°F).
- ClickLoc™ locking connector with gold-plated contacts — moisture-resistant, won’t back off under vibration, consistent connections.
- Plug-and-play interchangeable with any 3300 XL 8 mm Proximitor sensor or extension cable — swap without recalibration.
- API 670 compliant — meets industry limits for performance, linearity, stability.
- Wide linear range (~2.0 mm / 80 mils) and standard scale factor (200 mV/mil) — good accuracy for diagnostic work.
- Resistant to turbine oils, lubricants and common chemical contaminants.
Frequently Asked Questions
What’s the “104” in 330104-00-11-10-01-00 vs 330101?
330101 is the standard version with regular cable. 330104-00-11-10-01-00 adds a stainless steel armor layer on the cable. So in practice, 330104-00-11-10-01-00 is just more rugged — better against oil, vibration, and mechanical damage in tight machine areas.Does 330104-00-11-10-01-00 need recalibration with a different Proximitor?
Usually no.330104-00-11-10-01-00 is part of the 3300 XL system, which is designed for interchangeability. In most cases, you can swap it in without any recalibration work.
What are the mounting dimensions of 330104-00-11-10-01-00?
330104-00-11-10-01-00 uses an M10 × 1 thread. Overall length is around 110 mm. 330104-00-11-10-01-00 is typically used in deeper mounting locations like bearing housings or thick machine walls.Can 330104-00-11-10-01-00 be used in 5 m or 9 m systems?
Yes, but you need to match the total system length. 330104-00-11-10-01-00 itself is a 1.0 m probe. For a 5 m system, it pairs with a 4 m extension cable. For a 9 m system, it pairs with an 8 m extension cable.What connector does 330104-00-11-10-01-00 use and how is it protected?
330104-00-11-10-01-00 uses a miniature coax ClickLoc™ connector (Option 01). 330104-00-11-10-01-00 normally comes with a connector protector installed, which helps prevent contamination from oil or moisture.What is the maximum temperature rating of 330104-00-11-10-01-00?
330104-00-11-10-01-00 is rated for a maximum operating temperature of around 177°C (350°F). With PPS used in the probe tip and FEP insulation on the cable, 330104-00-11-10-01-00 is commonly used in high-temperature environments like turbines, and it generally keeps stable performance even under continuous heat exposure.
Compatible Parts & Accessories
| 128229-01 | 125840-01 |
| 128240-01 | 125800-01 |
| 133396-01 | 330105-02-12-05-02-05 |
| 146031-01 | 330130-080-00-CN |
| 330103-00-04-10-02-00 | 330106-05-30-10-02-CN |
| 330104-00-06-05-02-00 | 3300/55 |
| 330105-02-12-05-02-00 | 330780-50-00 |
| 330106-05-30-05-02-00 | 330180-50-00 |
| 330106-05-30-10-02-05 | 330130-045-00-00 |
| 330130-040-00-00 | 330180-51-05 |
| 330130-040-01-00 | 330130-040-00-05 |
| 330180-91-05 | 330103-00-05-05-02-00 |
| 3500/20 | 330180-51-00 |
| 3500/45 176449-04 | 330103-00-03-05-02-00 |
| 3500/60 | 330730-040-00-00 |
| 3500/64M | 330780-90-00 |
| 330103-00-06-10-02-00 | 330180-91-00 |
| 330106-05-30-10-02-00 | 3500/25 149369-01 |
| 133442-01 | 3500/20 125744-02 |
| 330180-90-00 | 133827-01 |
PRODUTOS CONEXOS
Vídeo
Vídeo
Vídeo
Obtenha o melhor preço
Vídeo
Vídeo
Envie-nos seu inquérito diretamente
