330104-00-05-50-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe
Bently Nevada 330104 Bently Nevada 3300 XL system
330104-00-05-50-02-00 Probe centrifugal compressor monitor
3300 XL 8mm Proximity Probe radial vibration monitoring
محل منبع:
ایالات متحده آمریکا
نام تجاری:
Bently Nevada
شماره مدل:
330104-00-05-50-02-00
Bently Nevada 330104 Bently Nevada 3300 XL system
,330104-00-05-50-02-00 Probe centrifugal compressor monitor
,3300 XL 8mm Proximity Probe radial vibration monitoring
- Complete Interchangeability: The Bently Nevada 330104 / 330104-00-05-50-02-00 Probe is basically designed so probes, cables, and sensors can swap without much headache. In most cases no bench calibration is needed, just replace and it runs inside the Bently Nevada 3300 XL 8mm Proximity Probe setup.
- API 670 Compliant: Built around API 670 compliant transducer requirements, mainly for radial vibration monitoring and axial position measurement. It stays within expected linear range and temperature behavior, so it fits typical machinery protection sensor standards used in turbines and compressors.
- Integral Stainless Steel Armor: Comes with armored probe cable, usually AISI 302/304 stainless steel jacket. Feels quite solid in real installation, giving around 330 N (75 lbf) pull strength. Works well in tight routing inside industrial rotating machinery.
- ClickLoc Self-Locking Connector: Uses ClickLoc connector cable design with gold-plated coaxial interface. No tools needed, just finger-tight until it clicks. In field work this saves time, especially during Bently Nevada probe with armor replacement or maintenance.
- Ruggedized Probe Tip: Probe tip is encapsulated with PPS material plus stainless steel body. Not fancy, but it handles vibration, oil mist, and temperature cycles common in steam turbine vibration monitoring and gas turbine shaft protection.
- Advanced RFI/EMI Immunity: Signal side is quite stable, even in noisy plant environments. Good resistance to RFI/EMI, so it still behaves properly in power plant instrumentation or centrifugal compressor monitor systems without needing heavy shielding.
Amikon delivers premium industrial automation spare parts—principally PLC, DCS, and TSI systems—to over 160 countries across major global regions:
- North America (United States, Canada, Mexico) — oil & gas side is pretty active, and automotive plants also show up a lot in shipments.
- Europe (Germany, UK, France, Italy) — more on machinery lines and chemical plants, nothing too surprising here, but demand stays consistent.
- Middle East & Africa (UAE, Saudi Arabia, South Africa) — refineries mostly, plus mining projects in harsher environments where equipment reliability matters.
- Asia-Pacific (China, Singapore, Australia, India) — quite mixed, from semiconductor fabs to metallurgy and power stations, depends on the country.
- South America (Brazil, Chile, Argentina) — mining is the big one, especially copper-related projects, hydropower also comes up from time to time.
- Discontinued Part Specialist
We source rare, obsolete, and hard-to-find PLC/DCS parts to keep your legacy systems running. - Massive Inventory, Ready to Ship
Huge stock of top brands (ABB, AB, Bently Nevada) available for immediate worldwide dispatch. - 100% Tested & 1-Year Warranty
Every component undergoes strict quality inspection and comes with a comprehensive 12-month warranty. - Minimize Your Downtime
Fast global shipping and rapid quotation response to get your production line back up instantly.
The Bently Nevada 330104-00-05-50-02-00 / 330104 proximity probe is mainly used on industrial rotating machinery where continuous protection matters. You’ll usually see it in steam turbine vibration monitoring, gas turbine shaft protection, and centrifugal compressor monitor setups.
It handles radial vibration monitoring, axial position measurement, and shaft displacement measurement, and in many plants it also takes part in Keyphasor speed tracking for phase reference. Basically, it sits in the front line of machinery protection for fluid-film bearing equipment.
The 330104 structure is actually quite “mechanical”, not complicated once you’ve seen a few.
- 330104 = 8mm probe, M10x1 thread, armored probe cable
- 00 = fully threaded body (no unthreaded section)
- 05 = 50 mm case length
- 50 = 5.0 m system length
- 02 = ClickLoc connector cable type
- 00 = standard approval option
So when someone orders 330104-00-05-50-02-00, they are basically locking in a very specific physical build for Bently Nevada 3300 XL system compatibility.
No, usually not. The 330104-00-05-50-02-00 Probe is built for API 670 compliant transducer interchangeability, so it can be swapped directly in most cases.
That’s one of the reasons maintenance teams like it—during shutdown or emergency shutdown system (ESD) events, you don’t waste time on bench calibration. Just replace and it runs inside the existing machinery protection sensor loop.
In this 5-meter version, not really. The 330104-00-05-50-02-00 already includes a built-in cable, so it connects directly into the system loop.
It pairs with 330180 Proximitor Sensor and works inside the Bently Nevada 3300 XL system or 3500 monitoring spares architecture. In most setups, no extra 330130 Extension Cable is needed, which actually reduces wiring points and signal loss risk.
In a Bently Nevada 3500 monitoring system, the probe is just the front-end pickup. The signal goes into modules like 3500/40M vibration monitor or 3500/42M displacement module, then gets processed for alarms and trends.
From there it can feed plant asset management, trigger protection logic, or link into turbine and compressor control strategies. It’s basically one of the core inputs for critical asset protection in rotating equipment.
| Part Number | Part Number |
|---|---|
| 330103-02-07-10-02-00 | 21000-28-10-00-098-04-02 |
| 330103-02-12-10-02-00 | 21000-28-10-00-217-04-02 |
| 330103-05-13-10-02-00 | 330104-00-05-10-02-00 |
| 330103-07-12-10-02-00 | 330101-00-08-20-02-05 |
| 330104-01-05-10-02-00 | 330130-070-00-00 |
| 330703-050-120-10-02-00 | 330130-080-01-05 |
| 330709-050-120-10-02-00 | 330703-000-060-50-12-00 |
| 76686-040-01 | 330103-00-06-15-02-CN |
| 81305-040-00 | 330130-030-01-CN |
| 135489-04 | 102044-00-18-10-02 |
| 128031-01C 128031-01 | 144181-50 |
| 330904-05-14-05-02-00 | 3500/42E |
| 330930-040-00-00 | 3500/50E |
| 330909-00-60-10-02-05 | 330101-30-63-10-02-00 |
| 21000-16-10-15-057-03-02 | 330130-035-00-CN |
| 21000-16-10-15-102-03-02 | 330130-035-01-CN |
| 21000-16-10-15-114-03-02 | 330130-045-01-CN |
| 21000-16-10-15-144-03-02 | 330104-00-07-05-02-00 |
| 991-01-XX-01-CN | 330130-085-01-00 |
| 3500/93 135799-02 | 40113-02 |
ویدیو
ویدیو
ویدیو
ویدیو
ویدیو
درخواست خود را به طور مستقیم به ما بفرستید
