330709-050-120-10-02-00 Bently Nevada 3300 XL 11 mm Proximity Probe
Bently Nevada 330709 3300 XL Proximitor Sensor
330709-050-120-10-02-00 steam turbine monitoring
3300 XL 11 mm Proximity Probe axial thrust position measurement
원래 장소:
미국
브랜드 이름:
Bently Nevada
모델 번호:
330709-050-120-10-02-00
문의하기
조회를 요청하다
제품 상세정보
모델:
330709-050-120-10-02-00
포장:
원래의 새로운 포장
선적 장소:
중국 샤먼
해운:
TNT, DHL, 페덱스, EMS, UPS
예상 배송 크기:
2.7x2.3x123cm
무게:
0.16 킬로그램
강조하다:
Bently Nevada 330709 3300 XL Proximitor Sensor
,330709-050-120-10-02-00 steam turbine monitoring
,3300 XL 11 mm Proximity Probe axial thrust position measurement
지불과 운송 용어
최소 주문 수량
1
가격
66USD
포장 세부 사항
새로운 오리지널
배달 시간
2-3 근무일
지불 조건
티/티
공급 능력
재고 있음
관련 제품
문의하기
지금 접촉하세요
제품 설명
330709-050-120-10-02-00 Bently Nevada 3300 XL 11 mm Proximity Probe
The Bently Nevada 330709-050-120-10-02-00 is a 3300 XL 11 mm proximity probe for critical machinery diagnostics and asset protection, using eddy current proximity probe technology for non-contact measurement.
It comes with an M16 x 1.5 threaded probe, about 120 mm overall case length and 50 mm unthreaded length, with standard 3.94 V/mm (100 mV/mil) scale factor sensitivity and 4.0 mm linear range. Cable is 1.0 metre unarmored, with ClickLoc connector, typically used with 3300 XL Proximitor Sensor and Bently Nevada 3500 rack system (e.g. 3500/40M, 3500/42M). It fits API 670 compliant system setups and general industrial rotating machinery monitoring. Operating range is -52°C to +177°C. Main applications:
- Steam turbine monitoring (axial thrust position & differential expansion)
- Gas turbine protection & centrifugal compressor monitor packages
- Reciprocating compressor shaft vibration & rod drop diagnostics
Global Distribution
Amikon delivers premium industrial automation spare parts—principally PLC, DCS, and TSI systems—to over 160 countries across major global regions:
- North America (United States, Canada, Mexico) — oil & gas side is pretty active, and automotive plants also show up a lot in shipments.
- Europe (Germany, UK, France, Italy) — more on machinery lines and chemical plants, nothing too surprising here, but demand stays consistent.
- Middle East & Africa (UAE, Saudi Arabia, South Africa) — refineries mostly, plus mining projects in harsher environments where equipment reliability matters.
- Asia-Pacific (China, Singapore, Australia, India) — quite mixed, from semiconductor fabs to metallurgy and power stations, depends on the country.
- South America (Brazil, Chile, Argentina) — mining is the big one, especially copper-related projects, hydropower also comes up from time to time.
Request a Quote Now
Contact: Miya Zheng
Email: sales@amikon.cn
WhatsApp: +86 180 2077 6792
Our Services & Benefits
- Discontinued Part Specialist
We source rare, obsolete, and hard-to-find PLC/DCS parts to keep your legacy systems running. - Massive Inventory, Ready to Ship
Huge stock of top brands (ABB, AB, Bently Nevada) available for immediate worldwide dispatch. - 100% Tested & 1-Year Warranty
Every component undergoes strict quality inspection and comes with a comprehensive 12-month warranty. - Minimize Your Downtime
Fast global shipping and rapid quotation response to get your production line back up instantly.
Frequently Asked Questions
Q1: What defines the configuration of 330709-050-120-10-02-00?
A1: It’s mainly decoded from the suffix. “050” means 50 mm unthreaded case length, “120” is the overall case length. Cable is 1.0 m unarmored, so no protection layer on the lead. “02” points to ClickLoc miniature coaxial connector type, used in 3300 XL 11 mm proximity probe system. “00” means no hazardous area approvals. So overall, it’s a standard industrial setup, nothing exotic, just fixed options combined.
Q2: How to size system length when replacing 330709-050-120-10-02-00 probe?
A2: You don’t touch the probe cable. That 1.0 m is fixed. System length comes from extension cable only. Usually 4 m extension for 5 m total system, or 8 m for 9 m system. Cutting or splicing is a no-go, it messes with calibration and signal stability in eddy current measurement.
Q3: Any material calibration concerns of the 330709-050-120-10-02-00?
A3: Factory tuning is for AISI 4140 steel. If shaft material changes to stainless or Monel, you may see small scale factor drift or slight cross-talk shift. It’s not a fault, just material response difference. Usually corrected in the 3500 monitoring system or adjusted via calibration factor.
Q4: Can armored probe replace 330709-050-120-10-02-00?
A4: Not directly. 330709 here is non-armored M16 x 1.5 design. Armored version changes size and fit, so it may not match brackets or mounting space. If protection is needed, better to keep this probe and add external conduit instead of changing ordering code.
Q5: What spacing is needed between probes when installing multiple 330709-050-120-10-02-00 probes?
A5: Keep around 40 mm minimum. 11 mm tip creates wider field, so if probes are too close, cross-talk can happen. This shows up as unstable vibration or noise, especially on turbines or high-speed shafts.
Related Part Numbers
| 330103-02-07-10-02-00 | 21000-28-10-00-098-04-02 |
| 330103-02-12-10-02-00 | 21000-28-10-00-217-04-02 |
| 330103-05-13-10-02-00 | 330104-00-05-10-02-00 |
| 330103-07-12-10-02-00 | 330101-00-08-20-02-05 |
| 330104-01-05-10-02-00 | 330130-070-00-00 |
| 330703-050-120-10-02-00 | 330130-080-01-05 |
| 330709-050-120-10-02-00 | 330703-000-060-50-12-00 |
| 76686-040-01 | 330103-00-06-15-02-CN |
| 81305-040-00 | 330130-030-01-CN |
| 135489-04 | 102044-00-18-10-02 |
| 128031-01C 128031-01 | 144181-50 |
| 330904-05-14-05-02-00 | 3500/42E |
| 330930-040-00-00 | 3500/50E |
| 330909-00-60-10-02-05 | 330101-30-63-10-02-00 |
| 21000-16-10-15-057-03-02 | 330130-035-00-CN |
| 21000-16-10-15-102-03-02 | 330130-035-01-CN |
| 21000-16-10-15-114-03-02 | 330130-045-01-CN |
| 21000-16-10-15-144-03-02 | 330104-00-07-05-02-00 |
| 991-01-XX-01-CN | 330130-085-01-00 |
| 3500/93 135799-02 | 40113-02 |
관련 제품
화면
최고의 가격을 얻으십시오
화면
화면
최고의 가격을 얻으십시오
화면
화면
직접적으로 당신의 조사를 우리에게 보내세요
