AMIKON LIMITED
우리는 최대한 빨리 당신에 되돌아갈 것입니다.
원래 장소:
미국
브랜드 이름:
Bently Nevada
모델 번호:
330103-02-06-05-02-00
The Bently Nevada 330103-02-06-05-02-00 is an unarmored 3300 XL 8mm proximity probe designed for API 670 compliant rotating machinery protection. This high-precision eddy current sensor features an M10 x 1 metric thread, 20mm unthreaded length, and 60mm overall case length. It comes with a 0.5-meter standard cable, a miniature coaxial ClickLoc connector, and no hazardous area approvals.
Perfect for critical asset condition monitoring, this probe delivers accurate 2 mm linear displacement measurement for steam turbine radial vibration, shaft eccentricity, and fluid-film bearing axial thrust position when paired with a 3300 XL Proximitor sensor and 3500/40M monitor modules.
Used for rotating machinery vibration monitoring and equipment protection ensuring stable operation of critical industrial assets.
A1: Bently Nevada 3300 XL 8 mm eddy current proximity probe, unarmored version.
330103 is M10×1 threaded body
02 case length around 20 mm
06 overall about 60 mm
05 built-in 0.5 m cable
02 triaxial ClickLoc connector
00 no certification
nothing special, just a standard configuration used in general machinery setups.
A2: 2 mm linear range (80 mils), typical 3300 XL probe behavior
output sits at 7.87 V/mm (200 mV/mil)
bandwidth goes up to roughly 10 kHz, mostly for vibration work rather than slow displacement.
A3: Steam turbines, gas turbines, centrifugal compressors
fluid-film bearing machines, that’s the main environment
radial vibration, shaft eccentricity, axial position, sometimes Keyphasor signals as well.
A4: Main thing is total electrical length matching, otherwise readings don’t stay stable
probe already has 0.5 m cable inside
so a 5 m setup usually goes like this:
330130-045-00-00 extension cable
330180-50-00 Proximitor (5 m version)
if lengths are off, drift shows up sooner or later
A5: 11.2 N·m is the normal torque value, 33.9 N·m is upper limit but not really something you want to stay near.Thread engagement just keep under 15 mm, more than that starts to risk damage or binding
| 330103-00-05-05-02-00 | 3500/70M 176449-09 |
| 330180-51-00 | 330130-040-02-00 |
| 330103-00-03-05-02-00 | 3500/45 140072-04 |
| 330730-040-00-00 | 330130-045-01-00 |
| 330780-90-00 | 330130-080-00-05 |
| 330180-91-00 | 990-04-70-02-00 |
| 3500/25 149369-01 | 330104-15-23-10-02-00 |
| 3500/20 125744-02 | 330104-19-25-10-11-05 |
| 133827-01 | 330103-00-05-10-02-05 |
| JNJ5300-08-03-000-060-10-00-00-03 | 330103-00-18-05-02-05 |
| JNJ5300-08-045-00-00 | 330130-045-02-05 |
| JNJ5300-08-06-005-030-05-00-00-03 | 330101-00-08-05-02-05 |
| 3500/90 | 330130-085-00-05 |
| 330130-080-00-00 | 125388-01 |
| 330130-045-00-05 | 128275-01/128275-01F 130944-01 |
| 330130-085-00-00 | 330780-91-00 |
| 09E01KPS 3300XL 8MM | 330103-00-14-10-01-00 |
| 330180-50-05 | 330730-080-02-00 |
| TM0180-08-00-15-10-02 | 330104-05-13-10-02-00 |
| TM0180-A08-B00-C02-D10 | 3500/23E |
직접적으로 당신의 조사를 우리에게 보내세요