집
>
상품
>
GE 마크 VIe 컨트롤러
>
GE IC693MDL740 Positive Logic Output Module with 16 Output Points for Mark VIe Controller
GE IC693MDL740 Positive Logic Output Module with 16 Output Points for Mark VIe Controller
12/24 volts DC Output Module
16 output points Positive Logic Module
Positive Logic (Sourcing) GE Mark VIe Controller Module
원래 장소:
미국
브랜드 이름:
General Electric
모델 번호:
IC693MDL740
문의하기
조회를 요청하다
제품 상세정보
공칭 전압 출력:
12/24 볼트 DC
그룹 수:
2개 그룹
무주한 전류:
10ms 동안 4.78암페어
출력 전압 드롭:
최대 1V
응답 시간에:
최대 2ms
모듈 피크 전류 소모:
110 밀리앰프
모듈 입력 전압:
5 볼트 DC
상대습도:
5 ~ 95%
강조하다:
12/24 volts DC Output Module
,16 output points Positive Logic Module
,Positive Logic (Sourcing) GE Mark VIe Controller Module
지불과 운송 용어
최소 주문 수량
1
가격
66USD
포장 세부 사항
새로운 오리지널
배달 시간
2-3 영업일
지불 조건
티/티
공급 능력
재고 있음
관련 제품
문의하기
지금 접촉하세요
제품 설명
The 12/24 volt DC Positive Logic 0.5 Amp Output module for the Series 90-30 Programmable Logic Controller provides 16 output points arranged in two groups of eight, with a common power output terminal for each group. The module is designed with positive logic characteristics, sourcing current to the loads from the user common or positive power bus.
The output device is connected between the negative power bus and the module output, and the output characteristics are compatible with a wide range of user-supplied load devices such as motor starters, solenoids, and indicators. Power required to operate the field devices must be supplied by the user.
LED Status Indicators
LED indicators providing the ON/OFF status of each output point are located at the top of the module. The LED block consists of two horizontal rows, each with eight green LEDs. The top row is labeled A1 through 8 (points 1 through 8), and the bottom row is labeled B1 through 8 (points 9 through 16).
Module Design Features
- Insert positioned between inside and outside surfaces of hinged door
- Inside surface displays circuit wiring information
- Outside surface for recording circuit identification information
- Blue color-coding on outside left edge indicates low-voltage module
- No fuses on this module
Installation & Compatibility
The module can be installed in any I/O slot of a 5-slot or 10-slot baseplate in a Series 90-30 PLC system, allowing flexible system configuration.
Technical Specifications
| Manufacturer | General Electric (GE Fanuc) |
| Logic Type | Positive Logic (Sourcing) |
| I/O Density | 8 Channels (Single Group) |
| Voltage Range | 12 - 24 VDC (+20%, -15%) |
| Current Output | 0.5A per channel | 2A peak per common (10ms) |
| Thermal Range | 0°C to 60°C (Op) | -40°C to 85°C (Storage) |
| Physical Dimensions | 0.3 kg | 3.6 x 13 x 13.5 cm |
| Traceability | USA Origin | Xiamen |
The figure below provides field wiring details for interfacing user-supplied load devices and the associated power source with the 12/24 VDC positive logic 0.5 A output module.
Need a replacement for these?
DCS: We're loaded with ABB, Foxboro, and Honeywell (plus many more).
PLC: From Siemens staples to Bachmann and Woodhead classics.
TSI: Precision gear from Bently Nevada and EPRO.
PLC: From Siemens staples to Bachmann and Woodhead classics.
TSI: Precision gear from Bently Nevada and EPRO.
Wait, there's more: We have access to dozens of other brands that didn't make this list. If it's industrial and it's hard to find, we probably have it sitting on a shelf ready to go.
The Amikon Advantage
Fast Turnaround: We ship within 48 hours.
Full Protection: A full year of warranty on everything.
Transparency: Technical docs are ready whenever you need them.
관련 제품
화면
최고의 가격을 얻으십시오
화면
최고의 가격을 얻으십시오
화면
최고의 가격을 얻으십시오
화면
최고의 가격을 얻으십시오
화면
최고의 가격을 얻으십시오
직접적으로 당신의 조사를 우리에게 보내세요
