Σπίτι
>
προϊόντα
>
BENTLY NEVADA
>
Bently Nevada 330106-05-30-15-02-00 8 mm Reverse Mount Proximity Probe with Miniature ClickLoc Connector and API 670 Compliance
Bently Nevada 330106-05-30-15-02-00 8 mm Reverse Mount Proximity Probe with Miniature ClickLoc Connector and API 670 Compliance
3300 XL 8mm Proximity Probe Bently Nevada 3300 XL system
Reverse Mount Probe 330106 steam turbine vibration monitoring
eddy current vibration measurement gas turbine shaft displacement
Τόπος καταγωγής:
ΗΠΑ
Μάρκα:
Bently Nevada
Αριθμό μοντέλου:
330106-05-30-15-02-00
Μας ελάτε σε επαφή με
Ζητήστε ένα απόσπασμα
Λεπτομέρειες προιόντος
Μοντέλο:
330106-05-30-15-02-00
Χώρα προέλευσης:
ΗΠΑ
Τόπος αποστολής:
Xiamen, Κίνα
Αποστολή:
TNT, DHL, FedEx, EMS, UPS
MOQ:
1 Τεμάχιο
Συσκευασία:
Πρωτότυπη νέα συσκευασία
Επισημαίνω:
3300 XL 8mm Proximity Probe Bently Nevada 3300 XL system
,Reverse Mount Probe 330106 steam turbine vibration monitoring
,eddy current vibration measurement gas turbine shaft displacement
Όροι πληρωμής & ναυτιλίας
Ποσότητα παραγγελίας min
1
Τιμή
66USD
Συσκευασία λεπτομέρειες
Ολοκαίνουργιο και πρωτότυπο
Χρόνος παράδοσης
2-3 εργάσιμες ημέρες
Όροι πληρωμής
T/T
Δυνατότητα προσφοράς
Σε απόθεμα
Συγγενικά προϊόντα
Βίντεο
Bently Nevada 330103-00-06-05-02-00 Proximity Probe with M10 × 1 Metric Thread and 0.5-Meter Coaxial Cable for Wide Temperature Range
Πάρτε την καλύτερη τιμή
Βίντεο
Bently Nevada 9200-06-05-05-00 Two-Wire Velocity Seismoprobe Transducer with Self-Generating Technology and 10 Hz Minimum Operating Frequency in Stainless Steel Housing
Πάρτε την καλύτερη τιμή
Μας ελάτε σε επαφή με
Επαφή τώρα
Περιγραφή προϊόντων
Bently Nevada 330106-05-30-15-02-00 3300 XL 8 mm Reverse Mount Proximity Probe
Technical Specifications
| Specification Category | Configuration Details / Physical Parameters |
|---|---|
| Product Series | Bently Nevada 3300 XL 8 mm |
| Mounting Type | Reverse Mount |
| Unthreaded Length (-05) | 0.5 inches |
| Overall Case Length (-30) | 3.0 inches (M10 × 1 thread) |
| Total Cable Length (-15) | 1.5 meters (4.9 feet) |
| Connector Type (-02) | Miniature ClickLoc coaxial connector |
| Agency Approval (-00) | No approvals required |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | 303 or 304 Stainless Steel (SST) |
| Cable Jacket Material | Fluorinated Ethylene Propylene (FEP) |
| O-ring Material | Viton |
| Case Pressure Rating | Seals differential pressure up to 7.0 bar (100 psi) |
| Probe & Cable Temperature | -40°C to +175°C (-40°F to +347°F) |
| Connector Temperature | -40°C to +125°C (-40°F to +257°F) |
Key Benefits
- Minimize Downtime: Fast global shipping to get your operations back online instantly.
- Hard-to-Find Parts: Direct access to obsolete, rare, and discontinued automation components.
- Trusted Quality: 100% original, fully tested parts with an extended warranty.
Compatible Systems
- PLC Systems: Allen-Bradley (1756, 1747, 1769), Siemens (6ES7), Schneider Quantum, GE Fanuc
- DCS Modules: ABB (S800, Advant OCS), Honeywell (Experion, TDC 3000), Foxboro (FBM), Emerson Ovation
- TSI & ESD Systems: Bently Nevada (3500 Series), HIMA (F Series), Triconex (3008, 3721)
Primary Applications
- Steam Turbine Vibration Monitoring: Gives steady radial vibration readings for steam turbines running at high speed, basically helping keep an eye on rotor balance before things start drifting out of range. In real plant setups, this kind of data is what maintenance teams rely on to catch early mechanical looseness or imbalance trends.
- Gas Turbine Shaft Displacement: Used for tracking axial movement and thermal growth when temperatures get really harsh. The probe watches shaft position changes so there’s less risk of rotor touching stator parts — something that can turn into serious downtime pretty quickly if missed.
- Centrifugal Compressor Protection: Works around fluid-film bearings and focuses on clearance behavior. You get real-time feedback on how the machine is breathing under load, which helps spot early wear or instability in high-pressure compressor operation.
- Gearbox Shaft Vibration Probe: Non-contact eddy current style sensing, tuned for compact and oil-heavy gearbox environments. Installation usually goes into tight spaces where physical contact sensors just aren’t practical, especially in heavy-duty industrial drives.
- Hydroelectric Generator Sensor: Handles low-speed shaft runout and air gap variation monitoring in hydro units. In power plants, this is often part of the core instrumentation setup for keeping generator stability under long continuous operation.
- Reverse Mount Installation: Designed for situations where front-side access is basically impossible. The probe can be threaded through housing or bearing covers from the reverse side, which saves a lot of mechanical disassembly work during installation or replacement.
- API 670 Machinery Protection Compliance: Built in line with API 670 requirements for machinery protection systems used in oil, gas, and chemical plants. In practice, it’s the kind of compliance spec that gets checked first in critical asset monitoring projects.
- Bently Nevada 3300 XL System Upkeep: Often used as a direct replacement for the 330106 probe when doing maintenance on Bently Nevada 3300 XL systems. Helps bring the loop performance back to original condition during shutdowns or scheduled turnarounds.
- 3500/40M Monitor Integration: Works together with 330180 extension cables and Proximitor sensor modules, feeding clean eddy-current signals into 3500 rack systems. Usually part of a full vibration monitoring chain rather than a standalone piece.
Frequently Asked Questions
Q1: What are the primary functions and applications of the Bently Nevada 330106-05-30-15-02-00 proximity probe?
A: 330106-05-30-15-02-00 basically sits in the category of eddy current vibration sensor for non-contact proximity sensing on rotating machinery. In real field use, it’s not limited to one measurement — you’ll see it doing shaft displacement monitoring, radial vibration tracking, sometimes axial position sensing as well. Common setups include steam turbine vibration monitoring, gas turbine shaft displacement control, and centrifugal compressor protection. In a lot of plants, it’s tied directly into API 670 machinery protection requirements, so it’s not just a “sensor choice”, more like part of the compliance chain.
Q2: What do the physical dimensions and mechanical configuration codes mean for 330106-05-30-15-02-00?
A: The part number is actually quite “coded” in terms of structure. 330106 points to the 3300 XL 8mm reverse mount probe design, M10 × 1 thread type. Then -05 usually refers to the unthreaded length around 0.5 inch, while -30 indicates an overall case length of about 3.0 inches. Put together, this configuration is made for reverse mount installation — meaning it can go through machine housings or bearing covers when you don’t really have external space to work with.
Q3: What cable and connector options are integrated into the 330106-05-30-15-02-00 eddy current sensor?
A: The -15 option means you’re getting an integrated cable, around 1.5 meters, using FEP jacketed coaxial construction. In practice this helps when temperature or oil exposure is a concern. Connector side, -02 refers to the Miniature ClickLoc coaxial connector, which tends to hold up well in vibration-heavy environments — it locks in firmly, so signal stability doesn’t easily drift even when the machine is running rough.
Q4: Which system components and hardware monitors are fully compatible with 330106-05-30-15-02-00?
A: This probe doesn’t really work alone — it sits inside a full Bently Nevada 3300 XL system chain. Usually paired with a 3300 XL Proximitor Sensor plus a 330180 extension cable, which sets up either a 5 m or 9 m calibrated loop depending on configuration. From there, signals go into a 3500 rack system, commonly the 3500/40M monitor, for condition monitoring and machinery protection processing. So it’s more like one node in the whole protection network.
Q5: Can the 330106-05-30-15-02-00 probe be installed in hazardous areas requiring explosion-proof certifications?
A: No — the -00 suffix is the key point here. It means “No Approvals”, so there’s no ATEX, IECEx, or North America hazardous location certification attached. In real deployment terms, it’s intended for general industrial use or spare part replacement in safe zones, not for classified explosive environments.
Related Parts
330103-00-07-05-02-00
330101-00-08-20-02-05
330930-065-01-05
330130-070-00-00
990-05-50-02-01
330130-080-01-05
136483-01
330703-000-060-50-12-00
81544-01
330103-00-06-15-02-CN
82365-01
330130-030-01-CN
82367-01
102044-00-18-10-02
84147-01
144181-50
18622-030-01
3500/42E
330101-30-63-10-02-CN
3500/50E
330104-03-06-05-02-00
330101-30-63-10-02-00
330104-05-15-05-02-00
330130-035-00-CN
330101-00-60-10-02-00
330130-035-01-CN
330709-000-070-10-02-00
330130-045-01-CN
330101-00-56-10-02-00
330104-00-07-05-02-00
330103-00-03-10-02-00
330130-085-01-00
330106-05-30-15-02-CN
40113-02
21000-28-10-00-098-04-02
330130-035-00-00
21000-28-10-00-217-04-02
330130-040-00-CN
330104-00-05-10-02-00
84661-50
Συγγενικά προϊόντα
Βίντεο
Πάρτε την καλύτερη τιμή
Βίντεο
Πάρτε την καλύτερη τιμή
Βίντεο
Πάρτε την καλύτερη τιμή
Βίντεο
Πάρτε την καλύτερη τιμή
Βίντεο
Μας στείλετε την έρευνά σας άμεσα σε
