Honeywell L404F1235 হল একটি প্রেসার কন্ট্রোলার যা স্টিম, এয়ার, অদাহ্য গ্যাস এবং তরল পদার্থের জন্য যা প্রেসার-সেন্সিং উপাদানের জন্য ক্ষয়কারী নয়। এর অ্যাডজাস্টেবল অপারেটিং রেঞ্জ এবং সাবট্র্যাক্টিভ ডিফারেনশিয়াল নির্দিষ্ট অ্যাপ্লিকেশন সীমার মধ্যে প্রেসার কন্ট্রোল করার অনুমতি দেয়।
MODEL-SPECIFIC PRESSURE RANGE
20–300 PSI
Operating pressure range
20 PSI
Adjustable range
300 PSI
ADJUSTABLE DIFFERENTIAL
20–50 psi
Subtractive type
MAX. DIAPHRAGM PRESSURE
350 psi
Maximum diaphragm pressure
350 psi হল সর্বোচ্চ ডায়াফ্রাম চাপ, স্বাভাবিক অপারেটিং সেটপয়েন্ট নয়।
Technical Specification
L404F1235 · PRESSURE CONTROL DETAILS
Manufacturer
Honeywell
Product Series
PressureTrol® L404F
Operating Range
20–300 psi (140–2070 kPa)
Differential Range
20–50 psi (140–345 kPa), adjustable
Differential Type
Subtractive
Maximum Diaphragm Pressure
350 psi (2410 kPa)
Pressure Connection
1/4-19 BSPT internal thread
Switch Type
SPDT snap-acting switch
Switch Action on Pressure Rise
Makes R–W / Breaks R–B
Reset
Automatic reset
Understanding the Differential
HOW THE SUBTRACTIVE SETTING WORKS
Illustrative pressure setting
MAIN SETTING
200 psi
DIFFERENTIAL
30 psi
200 − 30 =
NOMINAL LOWER SWITCHING POINT
170 psi
Illustrative example only. Actual adjustment and switching behavior must be checked during commissioning.
The differential is subtracted from the main pressure setting. It is not a second independent operating range.
Application & Installation Considerations
01
Media Compatibility
Designed for steam, air, noncombustible gases and fluids that are non-corrosive to the pressure-sensing element.
02
Thread Compatibility
This model uses 1/4-19 BSPT internal threads. Check the connection standard before replacing an NPT-thread controller.
03
Steam Line Protection
A suitable siphon or steam trap arrangement may be required to protect the pressure-sensing element from direct high-temperature steam.
04
Electrical Contact Verification
Confirm the R, W and B terminal arrangement and the required switching logic before reconnecting field wiring.
Technical FAQ
FIVE POINTS TO CONSIDER BEFORE REPLACEMENT
Q1. How is the lower switching point calculated on Honeywell L404F1235?
A. L404F1235 uses a subtractive differential. Subtract the selected differential from the main setting to calculate the nominal lower switching point. For example, a 200 psi setting with a 30 psi differential gives a nominal lower point of 170 psi.
Q2. What contact change occurs when pressure rises on Honeywell L404F1235?
A. The SPDT snap switch makes the R–W connection and breaks the R–B connection on pressure rise. This matters when checking whether the replacement will produce the required control signal in the existing circuit.
Q3. Why is the BSPT thread on Honeywell L404F1235 not interchangeable by assumption with NPT?
A. BSPT and NPT use different thread forms and standards. A similar nominal size does not guarantee a correct mechanical fit or pressure seal. Verify the existing port and fitting standard before installation.
Q4. Why may a siphon or steam trap be needed with Honeywell L404F1235 in steam service?
A. A suitable siphon or steam trap arrangement helps prevent direct exposure of the sensing element to high-temperature steam. The installation design should account for the steam temperature, pressure connection and applicable equipment requirements.
Q5. Can Honeywell L404F1235 replace another L404F model with the same pressure range?
A. Not automatically. Compare the differential range, thread type, switch action, enclosure and terminal arrangement. Some L404F variants have different connection standards or terminal configurations even when their pressure ranges appear similar.
Need Honeywell L404F1235?
Send your part number, quantity and destination for a quotation.
Founded in Hong Kong in 2005, AMIKON supplies industrial automation parts and control system components to customers worldwide. Our product range covers PLC, HMI, DCS, panel controllers, industrial PCs and VFD spare parts from a wide selection of manufacturers.
Can't find your exact part number? Our experienced sales team can help with hard-to-find parts and complex spare-parts requirements.