বাড়ি
>
পণ্য
>
বেন্টলি নেভাদা
>
Bently Nevada TM0180-A08-B00-C02-D10 Proximity Probe with 8mm Diameter, API 670 Compliance, and 1.0 Meter Cable
Bently Nevada TM0180-A08-B00-C02-D10 Proximity Probe with 8mm Diameter, API 670 Compliance, and 1.0 Meter Cable
8mm Proximity Probe TM0180 sensor system
radial vibration measurement centrifugal compressor protection
steam turbine vibration monitoring shaft axial position monitoring
উৎপত্তি স্থল:
USA
পরিচিতিমুলক নাম:
Bently Nevada
মডেল নম্বার:
TM0180-A08-B00-C02-D10
আমাদের সাথে যোগাযোগ
একটি উদ্ধৃতি অনুরোধ করুন
পণ্যের বিবরণ
মডেল:
TM0180-A08-B00-C02-D10
মূল দেশ:
USA
চালানের স্থান:
জিয়ামেন, চীন
শিপিং:
টিএনটি, ডিএইচএল, ফেডেক্স, ইএমএস, ইউপিএস
MOQ:
1 টুকরা
প্যাকেজিং:
আসল নতুন প্যাকেজিং
বিশেষভাবে তুলে ধরা:
8mm Proximity Probe TM0180 sensor system
,radial vibration measurement centrifugal compressor protection
,steam turbine vibration monitoring shaft axial position monitoring
পেমেন্ট ও শিপিংয়ের শর্তাবলী
ন্যূনতম চাহিদার পরিমাণ
1
মূল্য
66USD
প্যাকেজিং বিবরণ
একেবারে নতুন এবং আসল
ডেলিভারি সময়
2-3 কাজের দিন
পরিশোধের শর্ত
টি/টি
যোগানের ক্ষমতা
স্টকে
সম্পর্কিত পণ্য
আমাদের সাথে যোগাযোগ
এখনই যোগাযোগ করুন
পণ্যের বর্ণনা
Bently Nevada TM0180-A08-B00-C02-D10 Proximity Probe
| Feature | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Model Series | TM0180 Proximity Probe (8mm) |
| Probe Diameter | 8.0 mm |
| Thread Type (A08) | M10×1 Thread with Armor |
| Unthreaded Length (B00) | 0 mm |
| Case Length (C02) | 20 mm |
| Total Cable Length (D10) | 1.0 Meter |
| Linear Range | 2.0 mm (80 mils) |
| Sensitivity | 7.87 mV/µm (200 mV/mil) |
| Input Voltage | -23 VDC to -30 VDC |
| Frequency Response | 0 to 10 kHz |
| Operating Temperature | -40°C to +120°C |
| Linearity Error | < ±1% of full scale |
| Connector Type | Miniature Male Coaxial |
| Standard Compliance | API 670 |
Contact Us for Pricing or Technical Support:
Contact: Miya Zheng
Email: sales@amikon.cn
WhatsApp: +86 180 2077 6792
High-Precision Measurement Performance
- Eddy Current Technology: This is based on eddy current sensing, so measurement is non-contact. It tracks radial vibration and axial thrust position without physical contact, which basically removes the usual mechanical wear issue you see in traditional setups.
- Linear Measurement Range: The range is set at 2.0 mm (80 mils). In real use, this is quite standard for monitoring shaft movement in larger rotating machinery like turbines or compressors, nothing overly complicated but reliable for continuous tracking.
- Superior Sensitivity: Sensitivity is calibrated at 7.87 mV/µm (200 mV/mil). What this really means is it can pick up very small displacement changes without losing signal clarity, even when conditions are not perfectly stable.
- Broad Frequency Response: Frequency response runs from DC to 10 kHz. So it’s not limited to just one type of behavior—you get slow-roll data during startup, and also high-speed vibration signals when the machine is fully running.
Robust Hardware & Industrial Design
- Armored Cable Protection (A08): The cable uses flexible stainless steel armor. In environments with oil mist, moisture, or abrasive particles, this kind of protection makes a noticeable difference in long-term durability.
- Fully Threaded Body (B00): There is no unthreaded section (0 mm), which gives more freedom during installation. In practice, this helps when aligning the probe inside tighter machine housings where positioning matters.
- Compact Case Configuration (C02): The case length is only 20 mm. That compact design is mainly for installations where space is restricted, like dense turbine bearing areas or confined equipment layouts.
- Miniature Coaxial Connector: It comes with a gold-plated male coaxial connector plus a rubber boot. The idea is simple—keep the signal stable while also protecting against corrosion and vibration looseness over time.
Reliability & Environmental Resilience
- Extreme Temperature Tolerance: It can operate from -40°C up to +120°C (-40°F to +248°F). So whether it’s cold start conditions or hot running environments, it stays stable without obvious drift issues.
- API 670 Compliant: It follows API 670 standards, which is basically the benchmark for machinery protection systems in oil, gas, and power generation industries. This helps with global acceptance in critical applications.
- Chemical & Oil Resistance: The probe tip uses PPS material and the cable jacket is FEP. In real plant environments, this combination handles oil, chemicals, and corrosive fluids quite well, especially over long exposure cycles.
System Compatibility & Integration
- Bently Nevada Interchangeability: It is designed as a functional equivalent to the Bently Nevada 3300 XL 8mm series. In many cases, it can be swapped directly without changing system configuration, which is useful during retrofit work.
- Seamless System Linking: Works with TM0182 / TM0187 drivers and TM0181 extension cables. Usually this forms a complete loop for condition monitoring without compatibility headaches.
- Versatile Monitoring Interface: Compatible with Bently Nevada 3500 rack systems, PT2060 platforms, and standard PLC/DCS vibration inputs. So integration into existing monitoring setups is generally straightforward, especially in industrial upgrade projects.
Critical Rotating Machinery Monitoring
- Steam & Gas Turbine Protection: This probe is commonly deployed on steam and gas turbines in power plants. It continuously watches shaft vibration and axial thrust, which is basically what you need to avoid serious failures when machines are running at very high speed. In practice, it’s part of the early warning layer before things go critical.
- Centrifugal & Axial Compressor Monitoring: On compressors used in refineries and gas processing plants, it provides real-time radial vibration data and shaft stability feedback. These machines usually don’t forgive imbalance or misalignment, so continuous monitoring here is kind of standard practice.
- Hydroelectric Generator Health Check: In hydro plants, it tracks shaft displacement and alignment on large vertical or horizontal generators. Over long operation cycles, this helps keep mechanical integrity under control, especially in heavy-load seasonal operation.
Essential Machinery Condition Monitoring
- Industrial Pump & Fan Diagnostics: Used on high-pressure pumps and cooling fans, it helps detect early signs like bearing wear, imbalance, or misalignment. Usually these issues start small, so having continuous vibration tracking makes maintenance planning more predictable.
- Gearbox Shaft Vibration Sensing: In mining, cement, and steel environments, it monitors internal shaft movement in heavy-duty gearboxes. These setups are harsh, so vibration trends are often used to decide maintenance timing before damage escalates.
- Electric Motor Vibration Analysis: For large industrial motors, it tracks vibration to avoid rotor-stator contact issues. It also supports overall drive system reliability, especially where motors are running continuously under load.
Specialized Measurement & Diagnostics
- Shaft Axial Thrust Measurement: This is mainly for detecting thrust bearing problems. It monitors axial (longitudinal) shaft movement relative to the housing, which is often one of the first indicators of thrust-related failure.
- Radial Vibration & Eccentricity: It measures shaft motion inside bearings, sometimes referred to as orbit behavior. It can also pick up shaft bow or warp during slow-roll startup conditions, which is useful for balancing checks and startup diagnostics.
- Phase Reference & Speed Sensing (Keyphasor®): In some setups, it can act as a speed reference or tachometer signal source. This timing signal is used for vibration phase analysis and rotor balancing work.
System & Regulatory Compliance
- API 670 Machinery Protection: It fits into API 670 compliant protection systems, which is basically the industry standard in oil, gas, and power generation. This helps ensure safety compliance and insurance acceptance for critical assets.
- DCS/PLC System Integration: The sensor output is typically fed into DCS or PLC systems. From there it can support automated protection logic, including emergency shutdown (ESD) functions when vibration thresholds are exceeded.
- Remote Condition Monitoring: Data is also used in predictive maintenance platforms for long-term trend tracking. Over time, this helps reduce unexpected downtime and improves asset lifecycle planning, especially in continuous production environments.
Frequently Asked Questions
Q1: What are the main functions of TM0180-A08-B00-C02-D10?
A1: TM0180-A08-B00-C02-D10 is an eddy current proximity probe. Used for radial vibration measurement, shaft axial position monitoring, and eccentricity on rotating machinery. Non-contact type, real-time signal, mainly for machinery health diagnostics.
Q2: Is the TM0180-A08-B00-C02-D10 compatible with existing Bently Nevada 3300 XL monitoring systems?
A2: Yes, TM0180-A08-B00-C02-D10 works as a direct replacement for Bently Nevada 3300 XL 8mm probe. Usually no recalibration needed on 3500 rack modules or proximity sensor interface.
Q3: What do the model codes in the TM0180-A08-B00-C02-D10 mean?
A3: A08 M10×1 stainless armor
B00 no unthreaded section
C02 short case 20mm
D10 1.0m cable
B00 no unthreaded section
C02 short case 20mm
D10 1.0m cable
Q4: How does the TM0180-A08-B00-C02-D10 handle harsh conditions?
A4: -40°C to +120°C. PPS tip, FEP cable, stainless armor. Works fine in oil, moisture, vibration, abrasion environments like turbines and petrochemical plants.
Q5: What supporting hardware is required to complete a measurement loop using the TM0180-A08-B00-C02-D10?
A5: TM0181 extension cable + TM0182 driver (Proximitor). That’s the full TM0180 sensor system. Cable length should match calibration (5.0m / 9.0m), otherwise signal may not be stable.
Compatible Parts & Accessories
| 84147-01 | 144181-50 |
| 18622-030-01 | 3500/42E |
| 330101-30-63-10-02-CN | 3500/50E |
| 330104-03-06-05-02-00 | 330101-30-63-10-02-00 |
| 330104-05-15-05-02-00 | 330130-035-00-CN |
| 330101-00-60-10-02-00 | 330130-035-01-CN |
| 330709-000-070-10-02-00 | 330130-045-01-CN |
| 330101-00-56-10-02-00 | 330104-00-07-05-02-00 |
| 330103-00-03-10-02-00 | 330130-085-01-00 |
| 330106-05-30-15-02-CN | 40113-02 |
| 21000-28-10-00-098-04-02 | 330130-035-00-00 |
| 21000-28-10-00-217-04-02 | 330130-040-00-CN |
| 330104-00-05-10-02-00 | 84661-50 |
| 330101-00-08-20-02-05 | 330130-045-03-05 |
| 330130-070-00-00 | 330703-000-060-10-02-00 |
| 330130-080-01-05 | 106M1081-01 |
| 330703-000-060-50-12-00 | 3500/42M 176449-02 |
| 330103-00-06-15-02-CN | 3500/15 AC 127610-01 |
| 330130-030-01-CN | 128276-01E 131151-01 |
| 102044-00-18-10-02 | 18745-04 |
সম্পর্কিত পণ্য
আপনার জিজ্ঞাসা সরাসরি আমাদের কাছে পাঠান
