تجميع واجهة وحدة الإدخال/الإخراج لوحدة التحكم القديمة، يقع بين أجهزة جانب وحدة التحكم وترتيب وحدات الإدخال/الإخراج المتصلة.
I/O LAYER System role
4PCRL1 Board mark
OCR 161 / WDPF SYSTEM ASSET
3A99158G01
I/O Interface Board · 4PCRL1
تجميع واجهة وحدة الإدخال/الإخراج لوحدة التحكم القديمة المستخدمة في تركيبات تحكم Westinghouse. تشغل اللوحة طبقة الواجهة بين أجهزة جانب وحدة التحكم وترتيب وحدات الإدخال/الإخراج المتصلة؛ يعتمد اختيار البديل على رقم التجميع الدقيق ودور الفتحة وهندسة الخزانة الحالية.
◈ Assembly 3A99158G01
⌁ Board mark 4PCRL1
◎ System layer Controller I/O
01 · OPERATING ROLE
Where the board sits in the control path
①
Controller layer Executes the control strategy
②
3A99158G01 Provides the I/O interface role
③
Connected I/O Carries plant-side signals
اللوحة هي تجميع واجهة خاص بالنظام، وليست وحدة إدخال/إخراج عالمية. يضمن البديل الناجح الحفاظ على عائلة وحدة التحكم المثبتة وهوية اللوحة وتعيين الفتحة وتوصيلات الاقتران.
02 / TECHNICAL IDENTITY
Verified configuration points
Manufacturer family
Westinghouse legacy control hardware
Assembly number
3A99158G01
Board marking
4PCRL1
Hardware role
Controller I/O interface card
Associated architecture
OCR 161 / WDPF-era control installations
Replacement basis
Exact assembly, board mark, slot and connector match
03 · DEPLOYMENT
Use, installation and commissioning
⌂
Use range
Legacy power-generation and process-control cabinets where this assembly is assigned the controller I/O interface role.
↳
Installation
De-energize the cabinet, preserve connector orientation and slot position, use static-safe handling, seat the board evenly and restore its retainers.
✓
Return to service
Confirm normal controller health, expected I/O response and absence of new diagnostics before returning the loop group to operation.
System relationship 3A99158G01 works beside processor and power assemblies inside the controller architecture. Those assemblies have different duties and are not interchangeable with this I/O interface board.
04 · FAMILY VIEW
Related controller assemblies
Model
System duty
Practical distinction
3A99158G01
I/O interface
Carries the 4PCRL1 interface role
5X00105G65
Processor card
Executes controller processing rather than I/O interfacing
3A99132G02
Controller power supply
Provides the controller power role
1C31129G03
Diagnostic analog output
A separate field-output function
AMIKON · INDUSTRIAL AUTOMATION
Keep production moving with responsive parts support.
PLC, HMI, DCS, industrial PC and drive spares for planned maintenance and urgent recovery.
Email: sales@amikon.cn
WhatsApp: 86-18020776792
AMIKON · SINCE 2005
Industrial spares without the search delay.
PLC, HMI, DCS, industrial PC and drive components supported by an experienced global team.
Need a difficult part number?Our sales team can help keep production moving.
sales@amikon.cn WhatsApp: 86-18020776792
05 · BUYER FAQ
Compatibility questions that matter
Ⓠ Can 3A99158G01 replace a board marked only 4PCRL1?
Ⓐ Treat both markings as required checkpoints. Confirm the installed assembly number, 4PCRL1 marking, slot role and connector arrangement together.
Ⓠ Is 3A99158G01 interchangeable with an OCR 161 processor card?
Ⓐ No. This assembly serves the I/O interface layer; processor and power assemblies perform different controller duties.
Ⓠ What cabinet checks reduce 3A99158G01 commissioning risk?
Ⓐ Preserve slot position and keyed connector orientation, inspect the mating hardware, and compare controller health and I/O behavior before and after the exchange.
Ⓠ Does 3A99158G01 require application logic changes?
Ⓐ A like-for-like hardware exchange normally preserves the existing strategy, but the controller must retain the same hardware assignment and channel mapping.
Ⓠ Why should 3A99158G01 be tested as part of the complete I/O path?
Ⓐ The interface board sits between controller-side hardware and connected I/O. End-to-end checks expose connector, slot and downstream faults that a board-only power check cannot reveal.