المنزل
>
المنتجات
>
بنتلي نيفادا
>
Bently Nevada 330103-05-10-10-02-05 8 mm Proximity Probe with API 670 Compliance and Miniature Coaxial ClickLoc Connector
Bently Nevada 330103-05-10-10-02-05 8 mm Proximity Probe with API 670 Compliance and Miniature Coaxial ClickLoc Connector
3300 XL 8mm Probe centrifugal compressor protection
non-contact vibration measurement 3300 XL Proximitor Sensor
steam turbine monitoring shaft displacement monitoring
مكان المنشأ:
الولايات المتحدة الأمريكية
اسم العلامة التجارية:
Bently Nevada
رقم الموديل:
330103-05-10-10-02-05
اتصل بنا
اطلب اقتباس
تفاصيل المنتج
نموذج:
330103-05-10-10-02-05
بلد المنشأ:
الولايات المتحدة الأمريكية
مكان الشحن:
شيامن، الصين
شحن:
تي ان تي، دي إتش إل، فيديكس، إي إم إس، يو بي إس
موك:
1 قطعة
التعبئة والتغليف:
العبوة الجديدة الأصلية
حجم الشحن المقدر:
1.8x1.5x113 سم
وزن:
0.08 كجم
إبراز:
3300 XL 8mm Probe centrifugal compressor protection
,non-contact vibration measurement 3300 XL Proximitor Sensor
,steam turbine monitoring shaft displacement monitoring
شروط الدفع والشحن
الحد الأدنى لكمية
1
الأسعار
66USD
تفاصيل التغليف
العلامة التجارية الجديدة والأصلية
وقت التسليم
2-3 أيام عمل
شروط الدفع
تي/تي
القدرة على العرض
في الأوراق المالية
منتجات ذات صلة
فيديو
Bently Nevada 330173-00-18-10-02-05 3300 5mm Proximity Probe with API 670 Standard and ATEX/IECEx/CSA Certification for Precision Displacement Sensing
احصل على أفضل سعر
فيديو
Bently Nevada 330104-13-20-10-02-00 8 mm Proximity Probe with API 670 Compliance and ClickLoc Miniature Coaxial Connector
احصل على أفضل سعر
اتصل بنا
اتصل الآن
وصف المنتج
Bently Nevada 330103-05-10-10-02-05 3300 XL 8 mm Proximity Probe
Technical Specifications
| Parameter | Technical Specifications & Configuration Details |
|---|---|
| Manufacturer | Bently Nevada |
| Product Series | 3300 XL 8 mm Proximity Transducer System |
| Full Part Number | 330103-05-10-10-02-05 |
| Base Model (330103) | 8 mm Probe, M10 x 1 thread, without armor |
| Unthreaded Length (-05) | 50 mm |
| Overall Case Length (-10) | 100 mm |
| Total Cable Length (-10) | 1.0 meter (3.3 feet) |
| Connector & Cable (-02) | Standard cable with miniature coaxial ClickLoc connector |
| Agency Approval (-05) | Multiple Approvals (CSA, ATEX, IECEx for Zone 0/1 hazardous areas) |
| Linear Measurement Range | 2.0 mm (80 mils), begins at ~0.25 mm (10 mils) from the probe tip |
| Scale Factor / Sensitivity | 7.87 V/mm (200 mV/mil) when connected to a 3300 XL Proximitor |
| Tip Diameter & Material | 8.0 mm (0.31 in) / Molded polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 Stainless Steel (SS) |
| Cable Type | 75 ohm miniature coaxial cable |
| Operating Temperature | -52°C to +177°C (-62°F to +350°F) |
| Probe Tip Pressure Rating | Hermetically sealed up to 7.0 bar (100 psi) differential |
| Standard Compliance | Fully compliant with American Petroleum Institute (API) 670 standards |
Contact Us for Pricing or Technical Support
Contact: Miya Zheng
Email: sales@amikon.cn
WhatsApp: +86 180 2077 6792
Key Features
- Advanced Eddy Current Technology: The 330103-05-10-10-02-05 belongs to the Bently Nevada 3300 XL 8mm Probe series and is widely used for non-contact vibration measurement in rotating machinery. You’ll usually see this type of eddy current transducer system installed on steam turbines, centrifugal compressors, and other fluid-film bearing machines where stable shaft displacement monitoring really matters.
- API 670 Standard Compliance: This API 670 compliant sensor is designed for straightforward integration into standard machinery protection system (MPS) setups. For plants already running a Bently Nevada 3500 rack module or a 3500/42M Proximitor Monitor, replacement and installation are generally pretty smooth without major modification work.
- Precise Linear Range: The probe offers a 2.0 mm linear range with a stable sensitivity factor around 7.87 V/mm. In actual axial thrust position measurement and radial vibration monitoring applications, signal consistency stays reliable even under higher-speed industrial rotating machinery conditions.
- Global Hazardous Area Approvals: ATEX, IECEx, and CSA certifications are already included, so this proximity probe is commonly used in hazardous area machinery monitoring environments as well. In oil and gas pipeline pumps or gas turbine protection systems, requirements for intrinsically safe sensor assemblies are usually strict, and this model has already been proven in those situations.
- Extreme Temperature Rating: Operating temperature covers roughly -52°C up to +177°C. For power plant instrumentation or high temperature rotating equipment, that wider range helps maintain signal stability when ambient temperatures fluctuate heavily.
- Hermetically Sealed Tip: The probe tip uses a molded PPS sealing structure designed to resist chemicals and pressure exposure. In some high temperature sensor protection applications, especially around oil vapor or process gas environments, that extra durability makes a noticeable difference over time.
- Specific Thread Profile: This model uses an M10 x 1 threaded proximity sensor body together with a 50 mm unthreaded case probe section and 100 mm overall length. Mounting depth adjustment is relatively straightforward, which helps during retrofit projects or direct replacement work.
- ClickLoc Coaxial Connector: A gold-plated ClickLoc miniature coaxial connector is combined with a low-loss 75-ohm coaxial cable. In real operating conditions, especially where machinery vibration is continuous, the connection tends to stay more secure compared with standard loose-fit connectors.
- Compact 1.0-Meter Length: The standard 1-meter cable configuration is usually enough for clean routing inside machine housings or conduit boxes. It keeps installation simpler and avoids excessive cable management issues in tighter spaces.
- Seamless Loop Compatibility: The 330103-05-10-10-02-05 works directly with the 3300 XL Proximitor Sensor and 330130 extension cable, supporting both 3300 XL 5-meter system and 3300 XL 9-meter loop setup configurations. For facilities already using Bently Nevada eddy current sensor systems, compatibility is normally not a problem.
- Direct 3500 System Integration: In many applications, the probe is connected directly into Bently Nevada 3500 monitoring system spares setups or integrated through TDI module integration structures. Raw vibration signals can then be transferred straight into the 3500/42M Proximitor Monitor for continuous machinery monitoring.
- Critical Asset Protection: Basically, the 330103-05-10-10-02-05 Proximity Probe is built for critical asset protection in demanding rotating equipment environments. Whether it’s steam turbine monitoring, gas turbine protection, or part of an emergency shutdown system (ESD), reliable vibration data becomes essential once the machine is running continuously. That’s also why many plants keep this model as part of their regular 3500 monitoring system spares inventory.
Industrial Applications
- Steam Turbine Monitoring: In steam turbine monitoring applications, the 330103-05-10-10-02-05 is commonly used to track rotor shaft displacement and radial vibration continuously. Turbine generators in power plants operate under heavy load for long periods, so even small vibration changes can become serious if they are not detected early.
- Gas Turbine Protection: For gas turbine protection, this 3300 XL 8mm Probe helps monitor axial thrust position and shaft eccentricity during high-speed and high-temperature operation. Maintaining proper casing clearance is usually critical in aero-derivative systems, especially when machines are running close to full load conditions.
- Centrifugal Compressor Protection: Inside centrifugal compressor monitor systems, the probe measures high-frequency shaft vibration near fluid-film bearings. Operators generally pay close attention to surge conditions, oil whirl, and other instability signals because unplanned downtime on oil and gas pipeline pumps can become extremely expensive.
- Hydroelectric Generator Diagnostics: Hydroelectric units may rotate slower than turbines or compressors, but shaft alignment and rotor runout monitoring are still important. In many power plant instrumentation systems, this proximity probe is used for continuous vibration monitoring and thermal structural expansion observation over long operating cycles.
- Industrial Rotating Machinery Overhaul: During plant turnarounds or scheduled maintenance shutdowns, the 330103-05-10-10-02-05 is often selected as a direct-fit replacement probe. Pumps, blowers, industrial gearboxes, and large fans are typical applications where compatibility with existing machinery protection system (MPS) layouts matters a lot.
- Hazardous Area Machinery Protection: This model is also widely used for hazardous area machinery monitoring in refinery zones, petrochemical plants, and chemical processing facilities. Since intrinsically safe sensor requirements are usually strict in explosive environments, proven field reliability becomes a big advantage.
- Emergency Shutdown System (ESD) Integration: Within an emergency shutdown system (ESD), the probe sends real-time machinery protection data directly into Bently Nevada 3500/42M modules. Once abnormal vibration or shaft movement is detected, automated trip logic and safety interlocks can react almost immediately.
- Critical Asset Predictive Maintenance:
Frequently Asked Questions
Q1: What is the primary function of the Bently Nevada 330103-05-10-10-02-05 proximity probe in industrial machinery?
A1: This type of 3300 XL probe is mostly used for vibration monitoring on rotating equipment. Steam turbines, compressors, large pumps — usually those kinds of machines. Since it works in a non-contact way, plants tend to keep using this kind of eddy current sensor for years. Especially when the machine runs continuously, stable monitoring matters more than anything else.
Q2: How do I decode the specific mechanical dimensions of the part number 330103-05-10-10-02-05?
A2: 330103 mainly refers to the standard M10 x 1 threaded body. The -05 and -10 options are related to probe length configuration. One is the unthreaded section, the other is the overall case length. A lot of bearing housings already have limited space, so people usually replace the probe with the same dimensions directly.
Q3: What are the electrical and cable specifications integrated into the 330103-05-10-10-02-05 transducer probe?
A3: Standard setup comes with a 1 meter cable and a miniature ClickLoc connector. Pretty common in the 3300 XL series actually. Once connected with the Proximitor sensor, the output follows the normal API 670 arrangement. In real projects, customers usually care more about signal stability during long operation periods.
Q4: Can the 330103-05-10-10-02-05 proximity sensor be installed in hazardous or explosive plant environments?
A4: Yes. The model already has ATEX, IECEx, and CSA approvals. In refinery plants or oil & gas applications, this type of probe is already widely used. For hazardous area machinery monitoring, a lot of users still prefer older proven Bently Nevada setups instead of changing to something unfamiliar.
Q5: Which extension cables and rack modules are compatible with the Bently Nevada 330103-05-10-10-02-05?
A5: Normally the probe is used together with a 330130 extension cable. Then the signal goes into a 3300 XL Proximitor Sensor or a 3500/42M module. Since many plants already have existing 3500 rack systems, integration is usually pretty straightforward.
Compatible System Components
| Component 1 | Component 2 |
|---|---|
| 3500/42M 176449-02 | 330703-000-060-10-02-00 |
| 3500/15 AC 127610-01 | 330103-00-09-10-02-00 |
| 128276-01E 131151-01 | 135813-01 |
| 18745-04 | 990-05-XX-01-00 |
| 330102-22-58-10-02-00 | 330180-X1-05 MOD:145004-02 |
| 330910-03-09-05-02-05 | 133323-01 |
| 330709-000-070-10-02-00 | 330905-00-08-10-02-00 |
| 3500/61 163179-02 | 990-04-50-01-00 |
| 1900/65A 172323-01/1900/65A 167699-02 | 330101-XX-XX-10-02-05 MOD:147773-00-12 |
| 3500/15 106M1079-01 | 330104-00-04-10-02-00 |
| 3500/65 145988-02 | 330104-00-06-10-02-00 |
| 3500/92 136180-01 | 330851-04-000-023-10-01-05 |
| 3500/94 145988-01 | 330910-05-10-02-00 |
| 330104-00-10-10-02-05 | 330101-00-16-10-02-00 |
| 330910-00-05-10-02-00 | 3300/12 |
| 3500/44M 176449-03 | 330850-50-05 |
| TK3-2E 14700-02A | 330730-080-00-00 |
| 3500/42M 140734-02 | 330930-040-01-00 |
| 3500/92 | 990-08-XX-01-00 |
| 330103-00-05-10-02-00 | 330130-040-03-00 |
منتجات ذات صلة
فيديو
احصل على أفضل سعر
فيديو
فيديو
احصل على أفضل سعر
فيديو
أرسل استفسارك مباشرة إلينا
