AMIKON LIMITED
سوف نعود إليك في أقرب وقت ممكن
مكان المنشأ:
الولايات المتحدة الأمريكية
اسم العلامة التجارية:
Bently Nevada
رقم الموديل:
16710-07
| Feature | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 16710-07 |
| Product Category | Interconnect Cable / Sensor Lead |
| Configuration | 3-Conductor Shielded |
| Protection Type | Stainless Steel Armor (Flexible) |
| Cable Length | 82 inches (~2.1 meters) |
| Wire Gauge | 22 AWG (0.5 mm²) |
| Connector A | 3-Socket Plug (Proximitor Side) |
| Connector B | Terminal Lugs (Monitor/Rack Side) |
| Compatibility | 330400 & 330425 Accelerometers |
| Temperature Range | -40°C to +85°C (-40°F to +185°F) |
| Shielding | Foil wrap with tinned copper drain wire |
| Insulation | High-density Polyethylene |
| Jacket Material | Flame-retardant Thermoplastic |
| Application | Machinery Protection & Vibration Monitoring |
| Contact Information |
A:It’s mainly a 3-conductor shielded cable that connects Bently Nevada 330400/330425 accelerometers to monitoring or protection systems, basically for signal transmission in vibration setups.
A: It usually refers to the cable length — in this case, about 82 inches, or roughly 7 feet (around 2.1 meters).
A: Yes, that’s actually one of its main points. The armored shielding helps it hold up well against EMI and RFI in industrial sites.
A:It’s rated for about -40°C to +85°C, so it works fine in most harsh plant environments, whether it’s cold or pretty hot on site.
A: One side comes with a 3-socket plug for the sensor, and the other side is finished with terminal lugs for connection to monitoring equipment.
A: It’s a passive cable, so no calibration on the cable itself. That said, in practice people usually still check the overall system scale factor after installation just to be safe.
أرسل استفسارك مباشرة إلينا